INSTRUCTION MANUAL
T210, T245, T470
Handles
This manual corresponds to the following references:
Precision Handles: General Pupose Handles: Heavy DutyHandles:
- T210-A - T245-A - T470-A
- T210-PA - T245-GA - T470-SA
- T210-NA - T245-PA - T470-ZA
- T245-NA - T470-FA
- T470-MC
- T470-NA
Packing List
The following items are included:
Handle ......................................................................................................................................................... 1 u ni t
according to purchased reference
Green Soft Foam Grips T8658 for T210 + T210N
Blue Soft Foam Grips T 33 10 for T210 P
Gree n Soft Foam Grips T6057 for T245 + T245G
Blue Soft Foam Grips T 152 8 f or T245P
Grips for Handles ..................................................................................................................................... 1 unit
already asembled, according purchased handle reference
OB1000 for T210
Sealing Plug for Handles ................................................... 1 unit
already asembled, according purchased handle reference
OB2000
for T245 and T470
Manual .............................. 1 unit
Ref. 0028966
2
Features - T210 Precision Handles
para manuales - color gris
T210 Handles are suitable for precision soldering jobs with medium power requirements.
Due to their size, they are ideal for conventional or small SMD soldering jobs, even under a
microscope.
They come with soft foam grip to ensure a better manual control of the tool and a greater comfor t
when working.
T210 Handles are supplied with 1.5 m cable length and work with C210 cartridges (not included).
T210 Precision Handle
Ref. T 210 -A
Green Soft Foam Grip T8658*
T210P Blue Grip Precision Handle
Ref. T210-PA
T210P Handles are designed with blue grip handle for easy differentiation from other handles,
e.g. when leaded and unleaded solder wire are used.
Blue Sof t Foam Grip T3310*
T210N Nitrogen Precision Handle
Ref. T 210 -NA
T210N Handles are designed to work in an oxygen-free atmosphere and so providing a better
soldering quality. They offer extra heat to the solder joint and help prevent oxidation.
Note: JBC’s GN Nitrogen Generator Module or an external nitrogen feed is needed.
Green Soft Foam Grip T8658*
Nitrogen feed
* The following sof t foam grip as replacement are avialable: green T8658, blue T3310, black T3311.
Nozzle
Ref. B6647
3
Features - T245 General Purpose Handles
T245 Handles are suitable for both, SMD components and soldering jobs with high power
requirements (e.g. ground plane soldering).
Some models come with soft foam grip to ensure a better manual control of the tool and a greater
comfort when working and in addition provides thermal insulation.
T245 Handles are supplied with 1.5 m cable length and work with C245 Cartridges (not included).
T245 General Purpose Handle
Ref. T245 -A
Green Soft Foam Grip T6057*
T245G General Purpose Handle with Reinforced Cable
Ref. T245 -GA
Green Soft Foam Grip T6057*
T245P Blue Grip Handle
Ref. T245-PA
T245P Handles are designed with blue grip handle for easy differentiation from other handles,
e.g. when leaded and leadfree solder wire are used.
Blue Sof t Foam Grip T1528*
*The following soft foam grip as replacement are avialable: green T6057, blue T1528, black T1530.
4
T245N Nitrogen General Purpose Handle
para manuales - color gris
Ref. T245-NA
T245N Handles are designed to work in an oxygen-free atmosphere and so providing
better quality soldering. They offer extra heat to the solder joint and help prevent oxidation.
Note: JBC’s GN Nitrogen Generator Module or an external nitrogen feed is needed.
Nitrogen Feed
Nozzle
Ref. B7244
Nozzle
Ref. B7968
Features - T470 Heavy Duty Handles
T470 Handles are suitable for intensive soldering jobs requiring high power delivery such as power
electronics components soldering, large coax cable soldering, metal sheet soldering, etc.
They are available with grips of several shapes and materials, as well as different cable lengths
(see below).
T470 Handles feature a set screw to secure the cartridge within the handpiece preventing its rotation.
T470 Heavy Duty Handle (1.5 m / 4.92 ft cable)
Ref. T470 - A
T470S Heavy Duty Handle (3 m / 9.84 ft cable)
Ref. T470 - S A
Green Grip
5
T470F Thermal Insulator Grip HD Handle (1.5 m / 4.92 ft cable)
Ref. T470-FA
T470M Thermal Insulator Grip HD Handle (3 m / 9.84 ft cable)
Ref. T470-MC
Green Soft Foam Grip
T470Z Tri-Lobed Grip HD Handle (1.5 m / 4.92 ft cable)
Ref. T470 - Z A
Green Tri-lobed Grip for Better Handling
T470N Nitrogen HD Handle (1.5 m / 4.92 ft cable)
Ref. T470-NA
T470N Handles are designed to work in an oxygen-free atmosphere and so providing better quality
soldering. They offer extra heat to the solder joint and help prevent oxidation.
Note: JBC’s GN Nitrogen Generator Module or an external nitrogen feed is needed.
Nitrogen Feed
Nozzle
Ref. B6195
Nozzle
Re f. B6193
Green Grip
Nozzle
Re f. B6194
6
Changing Cartridges - T210 and T245 Handles
para manuales - color gris
JBC’s tool stand ADS, for T210 and T245 Handles, comes with quick tip changer.
Save time and change cartridges safely without switching the station off. Be careful, the cartridges
may be hot, when placing them in the cartridge holder.
1. Removing 2. Inserting 3. Fixing
D
B
A
C
Place the cartridge in the
extractor and pull the handle
to remove it.
Note: It is essential to insert the cartridge as far as the mark for
a proper connection.
Mark
Place the handle on top
of the new car tridge and
press the handle down.
Changing Cartridges - T470 Handles
1. Removing 2. Inserting
Screw
Loosen the handle screw.
Place the soldering iron with
the cartridge in the extractor
and pull the handle to
remove it.
Place the handle on top of
the new car tridge and press
the handle down.
Use the holes to fix the
cartridge as follows:
A. For curved C210
B. For C245
C. For straight C210
D. Cartridge Holder
3. Fixing
Mark
Handle Screw
Note: After proper cartridge
insertion as far as the mark
, tighten the handle screw.
7
Changing Nitrogen Nozzles
If the outer cartridge diameter D1 is smaller than the inner nozzle diameter D2, the nozzle can be
removed without removing the cartridge.
When the nozzle is hot, use pliers to remove the nozzle.
øD
2
Nozzle
øD
1
If the outer cartridge diameter D1 is larger than the inner nozzle diameter D2. The car tridges must be
removed first before the nozzle can be removed.
For T470 Handle loose the screw and remove the cartrige. After wards de nozzle can be removed.
When the nozzle is hot, use pliers to remove it.
øD
Cartridge
1
øD
Screw
2
8
Changing Grips*
Replace the soft foam grips easily using the slip-on tabs. Note: Choose the correct grip depending on
your handle model.
Handles Green grips Blue grips Black grips
T210, T210P, T210N T8658 T3310 T3311
T245, T245G, T245P T6057 T1528 T1530
ø 1
ø 3,5
A
B
Cartridge Range
para manuales - color gris
JBC offers for each handle different cartridge types. Find the model that best suits your soldering
needs at www.jbctools.com.
T210 Handles work with C210 Cartridges, T245 Handles work C245 Cartridges and T470 Handles
with C470 Cartridges.
Conical Chisel Conical
Bent
Bevel
Special
Models
Changing Grips*
Replace the soft foam grips easily using the slip-on tabs. Note: Choose the correct grip depending on
your handle model.
Handles Green grips Blue grips Black grips
T210, T210P, T210N T8658 T3310 T3311
T245, T245G, T245P T6057 T1528 T1530
1. Inserting Tabs 2. Inserting Handle 3. Removing Tabs
Tab s
New Grip
Put the slide-on tabs into the
new grip.
Push the grip with the tabs
onto the handle.
Hold the grip and pull the tab.
Use pliers if necessary.
9
Changing Grips*
Hold the grip and pull the tab.
Use pliers if necessary.
Tab s
New Grip
Replace the soft foam grips easily using the slip-on tabs. Note: Choose the correct grip depending on
your handle model.
1. Inserting Tabs 2. Inserting Handle 3. Removing Tabs
The sealing plug prevents undesirable flux vapors or particles from entering inside the tool. Its usage
Replacing Sealing Plugs
Push the grip with the tabs
onto the handle.
Handles Green grips Blue grips Black grips
T210, T210P, T210N T8658 T3310 T3311
T245, T245G, T245P T6057 T1528 T1530
Put the slide-on tabs into the
new grip.
is highly recommended for intensive applications when soldering is exposed to FOD environments or
for applications where the soldering iron works close to vertical position.
Note: Choose the correct sealing plug depending on your
handle model.
Before replacing the sealing plug, unplug the power
supply and make sure the device is not hot.
2. Mounting Position 3. Inserting Sealing Plug1. Removing Sealing Plug
Sealing
Plug
Handles Sealing Plug
T210 OB1000
T245, T470 OB2000
Enter, not deeper than 8mm,
a small shaft or screwdriver,
lift and pull the sealing plug.
Never use a cartridge to do
this operation.
Note: The chamfered side has
to be positioned towards the
handle.
Accessories
Fume extractor
Ref. F3435 (for T245 / T470)
Ref. F3450 (for T210)
Clips can be easily
removed for quick
maintenance.
Handle
Cable collector
Ref. C C10 01
Keeps the work
area free of cable.
Push the sealing plug inside
the handle until the sealing
plug and handle edges are
aligned.
10
Compatibility
para manuales - color gris
Handle
T210
T210P
T245
T245P
T470
T470S
T470F
T470M
T470Z
T210N* C210
T245N* C245
T470N*
Cartridge
Range
C210
C245T245G
C245 ADS
C470 HDS
C245 ADS
C470 HDS
C245 ADS
C470 HDS
C245 ADS
C470 HDS
C245 ADS
C470 HDS
C245
C470
Compact
Stations
CD Stand DIU DDU DMU HDU
ADS
DNS
Modular System
* The MNE Nitrogen Flow Regulator is required. Use the proper nozzle according to the cartridge.
11
Notes
Maintenance
- Before carrying out maintenance, always unplug the stand and the tool.
- Check periodically that the metal parts of the tool and the stand are clean to ensure detection of
the tool when it is in the stand. Use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be per formed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot after the station
is turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Avoid flux coming into contact with skin or eyes to prevent irritation
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced
physical, sensory or mental capabilities or lacking experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
12
Notes
para manuales - color gris
13
Notes
14
Specifications
para manuales - color gris
T210
Precision Handles
Net Weight: Package Weight:
Ref. T210-A
Ref. T210-PA , Blue Grip
Ref. T210-N A , Nitrogen
T245
General Purpose Handles
Ref. T245-A
Ref. T245-GA, Reinforced Cable
Ref. T245 -PA, Blue Grip
Ref. T245-NA, Nitrogen
T470
Heavy Duty Handles
Ref. T470 - A
Ref. T470 - S A , 3m / 9.84ft cable
Ref. T470 - FA, Thermal Insulator Grip
Ref. T470 - M C, Thermal Insulator Grip
and 3m / 9.84ft cable
Ref. T470-ZA, Tri-Lobed Grip
Ref. T470 - N A , Nitrogen
For T245-NA and T470-NA:
- Package Dimensions: 277 x 73 x 50 mm
(L x W x H) 8.94 x 2.87 x 1.97 in
56.8 g / 0.013 lb 106.5 g / 0.031 lb
56.8 g / 0.013 lb 106.5 g / 0.031 lb
93 g / 0.013 lb 165 g / 0.031 lb
66 g / 0.146 lb 115 g / 0.254 lb
66 g / 0.146 lb 115 g / 0.254 lb
63.8 g / 0.141 lb 114.7 g / 0.253 lb
93.2 g / 0.205 lb 165 g / 0.364 lb
89.6 g / 0.198 lb 140.5 g / 0.310 lb
140.3 g / 0.309 lb 190.9 g / 0.421 lb
90.7g / 0.200 lb 140.6 g / 0.310 lb
137.8 g / 0.304 lb 188.6 g / 0.416 lb
90 g / 0.198 lb 140 g / 0.309 lb
93 g / 0.205 lb 165 g / 0.364 lb
For T47 0 - M C :
- Package Dimensions: 145 x 18 x 18mm
(L x W x H) 5.71 x 0.71 x 0.71 in
For all other handles:
- Package Dimensions: 235 x 40 x 40mm
(L x W x H) 9.25 x 1.57 x 1.57 in
Complies with CE standards
ESD safe
15
Warranty
para manuales - color gris
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facilit y.
0028966-170622
Loading...