ww w.jbctools.com
Thermally
English
Conductive Tapes
Ref. PH222 / PH223
www.j b cto ols .co m
Packing List
The following items should be included:
Thermally
Conductive Tape .......... 1 unit
See the reference below.
Features
Thermally Conductive Tape
Ref. PH222
50 mm
Manual ............................. 1 unit
Ref. 0014928
Thermally Conductive Tape
Ref. PH223
25 mm
How to use
High emissivity tape provides a 10x faster and more uniform preheating
of PCBs with metal substrates due to greater absorption of infrared.
1. Cut the tape to size and fix onto the underside of the PCB.
JBC recommends covering the whole underside. Partial covering may
cause deformity or damage to the PCB due to an unequal heating.
Thermally
conductive
tape
PCB with
metal substrats
2. Place the PCB with the tape on the PCB Holder. After use it can be
easily removed without leaving any residue. It can also be reused.
PCB Holder
Ref. PH321
IR Preheater
Ref. PH-B
Resistant and reusable tapes. Does not deform af ter use.
Supplied in reels for easy cutting.
2 3
Specifications
- Weight: PH222 - 440 g (1 lb)
PH223 - 262 g (0.5 lb)
- Width: PH222 - 50 mm
PH223 - 25 mm
- Reel length: 15 m
- Maximum operating temperature: 250ºC (482ºF)
Comply with CE standards
Warranty
JBC’s 2 year warranty covers this device
against all manufacturing defects,
including the replacement of defective
parts a nd labour.
Warrant y does not cover product wear
due to use or mis-use.
In order for the warranty to be valid,
equipment must be returned, postage
paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC,
electronic equipment at the end of their life must be
collected and returned to an authorized recycling facility.
www.jbctools.com
0014928-0515
Loading...