JBC Tools NANE-2C User Manual

www.jbctools.com

INSTRUCTION MANUAL

Nano Soldering Station

Ref. NANE-C

Packing List

The following items are included:

Control Unit ................... 1 un it

Ref. NAE-1C (120V)
NAE-2C (230V)
NAE-9C (100V)

Cartridge

dispenser Case .......... 2

units
Ref. 0020952
0020953

Ref. 0020952:
Ref. C115-101 x1
C115-103 x1
C11 5 -107 x 1
C11 5 -112 x1

Ref. 0020953:
Ref. C115-105 x2
C11 5 -113 x 2

Nano Handle ............... 2 units

Re f. NT115 - A

Pedal................................ 1 unit

Ref. P-405

Allen key ........................ 1 u ni t

Ref. 009848

Tool Holder .................. 2 units

Ref. 00166 06

Metal Brush ................... 1 unit

Ref. CL2466

Brass Wool .................... 1 un it

Ref. C L6 210

222

Power Cord .................... 1 un it

Ref. 0009417

(10 0/120V )

0009401 (230V)

Manual ............................ 1 unit

Ref. 0021449

www.jbctools.com

INSTRUCTION MANUAL

Nano Soldering station

Ref. NANE-C

Features

www.jbctools.com

Cable collector

Stand:
Intelligent Heat
Management

Process
Screen:

2.8 Color TF T

Metal brush

Nano Handle

Re f. NT115 - A

USB-A connector

Accessories not included:

Tool extension cord (1m)

Ref . A1205

Cartridge
extractor
and tip aligner

Brass wool

Nano Handle

Re f. NT115 - A

USB-B
connector

RJ12
connector
for Robot

Equipotential
connector

Main switch

Power socket

Pedal connectors

333

Tool Holder assembly Cable assembly

1

For tool

2

AN115-A

For tool
NT115-A

444

www.jbctools.com

Work Screen

The NANE-C offers an intuitive user interface which provides quick access to station parameters.
Default PIN: 0105

Status bar

Power
indicator

Displayed if
temperature
levels are
activated

Menu Options

Set the station
parameters

Power

Power

45%

45%

17:14

17:14

NT115

T470

ºC

ºC

380

350

Temp. Levels

Temp. Levels

250 380 400

250 350 380

Set the tool
parameters

Port

Port

1

2

Tool
in use

Station
Information

Change
port

Display the hours
worked in each cycle

Station Tools Counters

Consult / modif y the
links of the peripherals
connected to the
station with the por t
they are connected to.

It is possible to
choose the language
from a list.

ResetLanguagePeripherals

Allows you to carry
out an overall station
reset restoring all the
parameters to their
default values.

555

Advanced functionalities

It provides detailed graphics of tip temperature and power delivery in real time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.

Graphics

Designed to avoid thermal shock when soldering Ceramic Chip components like
MLCC, this new and unique feature allows controlling the heating ramp up rate of the
tool to gradually increase the temperature of the
component through all the phases of the soldering process. Up to 25 fully confi gurable

Profi les

JBC Net

Files

soldering profi les can be stored.

The fi rst system to optimize traceability in soldering

- Get greater quality and control in your production

- Manage your whole soldering process remotely in real time

Export graphics

Insert a USB flash drive into the
USB-A connector to save your
soldering process in csv format.

Station update

Download the JBC Update File from

www.jbctools.com/software.html

Update

Insert the USB flash drive with the
file downloadedto the station.

System notifications

The following icons will be displayed on the screen’s status bar.

USB fl ash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

666

Station sof tware update.
Press INFO to start the process.

Warning.
Press INFO for failure description.

Er r or.
Press INFO for failure description,
the type of error and how to proceed.

www.jbctools.com

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the quality of soldering. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

1. Wor k

When the tool is lifted from the holder the tip
will heat up to the selected temperature.

17:14

NT115

ºC

350

Selected 350ºC

2. Hibernation

When the tool is in the holder, the power
is cut off and the tool cools down to room
temperature.

17:14

NT115

Hibernatio

Actual Temp. 25ºC

n

Power

45%

Tool s Menu :

· Set temperature limits

· Set temperature levels

Port

2

Tool s Menu :

· Set Hibernation delay (from 0
to 60 min or no Hibernation)

Port

2

2

777

Chip Compoments Rework proces using Tweezers and pedal

The Adjustable Nano Tweezers is the most effective tool for desoldering chip components
but also it facilitates its rapid placement and soldering by using the P-405 pedal connected
to the station.

1

ROBOT

Pedal

Ref. P-405

Connections

Connect pedal P-405 to the same port
where de Nano Tweezers are connected.

2

Desoldering

Lift the tool from the holder and desolder
the component.

888

www.jbctools.com

3

Pad cleaning

Clean the pads with the desoldering tool
DS360-A*.

* Secondary station is needed.

4

Solder paste dispensing

Apply the solder paste amount needed to
solder the new chip component.

999

5

Placing

Press and hold the pedal and use the
tool to position the component on the
previously tinned pads.

6

Soldering

101010

Once in position, press and hold the pedal
to perform the soldering.

1

2,5

www.jbctools.com

Changing cartridges

Save time and change cartridges safely without having to switch the station off.

Removing

Inserting

Aligning

1

2

Place the cartridge in the slot
as shown and pull the handle
to remove it.

*Important

It is essential to insert the cartridges as far as the reference for a proper connection.

Push the cartridge into the
handle to the mark*.

Use the holes to rotate
the cartridges for a proper
alignment.

Reference

Compatible cartridges

The NT115-A and AN115-A work with C115 cartridges. Find the model that best suits your soldering
needs on www.jbctools.com

Conical

Chisel

Bevel

Conical

bent

Knife

Stainless

steel chisel

High thermal
performance

111111

Changing grips

1. Push the grip with

the tabs onto the

handle.

Grip for NT115-A

Nano handle

Changing the tip cleaning system

2. To remove the

tabs, hold the grip
and pull them out.
Use a pliers if
necessary.

Tabs

Replace the tip cleaning system:

- Brass wool

- Metal brush

121212

www.jbctools.com

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth.

- Use a damp cloth to clean the casing and the

tool. Alcohol can only be used to clean the
metal parts.

- Periodically check that the metal parts of the

tool and stand are clean so that the station
can detect the tool status.

- Maintain tip surface clean and tinned prior to

storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.

- Periodically check all cables and tubes.

- Replace a blown fuse as follows:

Fuse holder

Fuse holder

1. Pull of f the fuse holder and remove the
fuse. If necessar y use a tool to lever it off.

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

2. Press the new fuse into the fuse holder
and replace it in the station.

Fuse

131313

Safety

It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid the contact of flux with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

141414

www.jbctools.com

有害物质含量表

产品中有害物质的名称及含量

有害物质

部件名称

铅(Pb) 汞(Hg) 镉(Cd)

烙铁头 O O O O O O

手柄 O O O O O O

电源线 O O O O O O

主机 O O O O O O

电源插座 O O O O O O

保险丝 O O O O O O

主开关 O O O O O O

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电位连接 X O O O O O

变压器 O O O O O O

线路板 X O O O O O

O 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。
X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。

15

1515

Specifications

NANE-1C 120V 50/60Hz. Input fuse: 0.5A. Output: 8.5V
NANE-2C 230V 50/60Hz. Input fuse: 0.2A. Output: 8.5V
NANE-9C 100V 50/60Hz. Input fuse: 0.5A. Output: 8.5V

- Temperature Range: 90 - 450 °C (190 - 840 ºF) ±5%

- Idle Temp. Stability (still air): ±3 ºC (±5.5 ºF)

- Output Peak Power: 14W per tool

- Idle Temp. Stability (still air): ±3 ºC (±5.5 ºF)

- Tip to ground voltage: <2 mV

- Tip to ground resistance: <2 ohms

- Ambient operating temp: 10 - 50 ºC (50 - 122 ºF)

- Connections: USB-A / USB-B / Pedal connectors
RJ12 connector for Robot

- Net Weight: 2,5 kg (5.40 lb)

- Dimensions: 170 x 90 x 135 mm (6.70 x 3.54 x 5.31 in)

Complies with CE standards
ESD Safe

Warranty

JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.

Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 3 0 days of purchase.

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.

www.jbctools.com

0021449-0519