INSTRUCTION MANUAL
NAN
2-Tool Nano Soldering Station
This manual corresponds to the following references:
- NANE-9C (100V)
- NANE-1C (120V)
- NANE-2C (230V)
Packing List
The following items are included:
2-Tool Nano
Control Unit ................... 1 un it
Brass Wool .................... 1 un it
Ref. C L6210
Ref. 0020952
includes:
Ref. C115-101 x1
C115-103 x1
C11 5 -107 x 1
C11 5 -112 x 1
Ref. 0020953
includes:
Ref. C115-105 x2
C11 5 -113 x 2
Cartridge
dispenser Case .......... 2
Ref. 0020952 / Ref. 0020953
units
Nano Handle ............... 2 units
Ref. N T 115 - A
Metal Brush ................... 1 unit
Ref. CL24 66
Allen key ........................ 1 unit
Ref. 0009848
Pedal................................ 1 unit
Ref. P-40 5
Cabel Collector
and Stand .................... 2 units
Ref. CC20 02
Power Cable .................. 1 un it
Ref. 0024092 (100V)
0023715 (120V)
0023714 (230V)
Manual ............................ 1 unit
Ref. 0029451
22
2
Features and Connections
para manuales - color gris
Stand:
Intelligent Heat
Management
Process
Screen:
2.8 Color TF T
Metal Brush
NT115
Nano Handle
USB-A Connector
Cable Collector
Accessories not included:
Tool extension cord (1m)
Ref . A120 5
Cartridge Extractor
Tip Aligner
Brass wool
NT115
Nano Handle
USB-B
Connector
RJ12
Connector
for Robot
Equipotential
Connector
Main Switch
Power Socket
Pedal Connectors
33
3
ROBOT
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
ROBOT
ROBOT
ROBOT
ROBOT
Tool Stand Assembly
1
2
Tool Stand Replacement
Loosen the screw (1) and withdraw the tool
stand (2) .
2
3
Insert the new tool stand (3) and tighten the
screw (4).
3
4
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
1
NAU
ROBOT
Control Unit
PORT
2
PEDAL
2
444
ROBOT
ROBOT
ROBOT
ROBOT
ROBOT
380
ºC
Port
1
Power
45%
Temp. Levels
T470
250 380 400
17:14
350
ºC
Port
1
Power
45%
Temp. Levels
250 350
17:14
T245
380
Station
Information
Power
Indicator
Tool
in use
DDE Work Screen
Status Bar
The DDE offers an intuitive user interface which provides quick access to station parameters.
Default PIN: 0105
Change
Port
Displayed if
Temperature
Levels are
Activated
350
ºC
Port
2
Power
45%
Temp. Levels
250 350 380
17:14
Work Screen
para manuales - color gris
The work screen offers an intuitive user interface which provides quick access to station
parameters. Default PIN: 0105
Status Bar
NT115
Tool
in use
Power
indicator
Displayed if
temperature
levels are
activated
Menu Options
Station Tools Counters
Set the station
parameters
Set the per ipheral
links with the station
ports
Set the tool
parameters
Restore station
parameters to default
values
Station
Information
Change
port
Display the hours
worked in each cycle
ResetPeripherals
Troubleshooting
Station troubleshooting available on the product page at www.jbctools.com
555
Advanced Functionalities
It provides detailed graphics of tip temperature and power delivery in real time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.
Graphics
Get greater quality and control in your production.
JBC Net
Files
Update
Manage your whole soldering process remotely in real time.
For more information see www.jbctools.com/webmanager.html.
Export graphics
Insert a USB flash drive into the
USB-A connector to save your
soldering process in csv format.
Station update
Download the JBC Update File from
www.jbctools.com/software.html
Insert the USB flash drive with the
file downloaded to the station.
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
System Notifications
The following icons will be displayed on the screen’s status bar.
USB fl ash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot. downloaded to the station.
666
Station sof tware update. Press INFO to
start the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.
ROBOT
ROBOT
Operation
para manuales - color gris
JBC’s Exclusive Heating System
This revolutionary technology is able to recover tip temperature extremely quickly.
This allows the user to work at a lower temperature.
As a result, tip life increases by 5.
2. Hibernation1. Work
When the tool is lifted from the holder the tip
will heat up to the selected temperature.
17:14
NT115
ºC
350
Selected 350ºC
Power
45%
Tool s Me n u:
· Set temperature limits
· Set temperature levels
Port
2
When the tool is in the holder, the power
is cut off and the tool cools down to room
temperature.
17:14
NT115
Hibernatio
Actual Temp. 25ºC
Tool s Me n u:
· Set Hibernation delay (from 0
to 60 min or no Hibernation)
n
Port
2
2
777
Example:
Chip Compoments Rework Process using Tweezers and Pedal
The Pedal is frequently used to rework components with tweezers.
AN115 JBCs adjustable nano tweezers is the most effective tool for desoldering chip components
but also it facilitates its rapid placement and soldering by using P405 pedal connected to JBC´s NAS
station.
1
ROBOT
NAS
2-Tool Nano Rework Station
connect to
the same port
AN115
Ajustable Nano Tweezers
Connections
P405
Pedal
Connect pedal P405 to the same port where
AN115 nano tweezers are connected.
In the peripherals menu for the “Pedal
Activation Mode” choose between “pressed”
and “released”.
888
C115
C11
C105 /
C105 / C115
19:29
ºC
NT105
2
para manuales - color gris
* “Press Mode” previously selected
3
4
DPM
Manual
Solder Paste
Dispenser
AN115
Ajustable Nano
Twe e zer s
DS360
Micro
Desoldering Iron
Desoldering*
Lift the tool from the holder, press and hold
the pedal to activate the tool and desolder the
component.
Once the pedal is released the tool enters in
hibernation mode and cools down.
Pad Cleaning
Clean the pads with JBC´s desoldering tool
DS360.
For this operation JBC´s desoldering station
DSS is needed.
Solder Paste Dispensing
Apply the solder paste amount needed to
solder the new chip component.
The use of JBC´s DPM solder paste dispenser
is recommended.
999
5
AN115
Ajustable Nano
Twe e zer s
Placing
Do not press the pedal.
Use the tool to position the component on the
previously tinned pad.
Note:
The inactive tool prevents the component from
heating up prematurely.
6
101010
AN115
Ajustable Nano
Twe e zer s
Soldering
Once in position press and hold the pedal to
activate the tool and perform the soldering.
1
2,5
C11
C105 /
C105 / C115
C105 / C115
C105 / C115
C115
C11
C105 /
C105 / C115
C11
C105 /
C105 / C115
Changing Cartridges
para manuales - color gris
Save time and change cartridges safely without having to switch the station off.
1. Removing 2. Inserting 3. Aligning
1
2
C115
Place the cartridge into the
extractor slot (1) and pull the
handle to remove them (2).
Push the cartridge into the
handle until the mark*.
C11
C105 /
Use the holes to rotate
the cartridges for a proper
alignment.
*Important
It is essential to inser t the cartridges as far as the reference ring for a proper connection.
Reference
Ring
Compatible Cartridges
The Nano Handle NT115 and the Ajustable Nano Tweezers AN115 work with C115 cartridges. Find the
model that best suits your soldering needs on www.jbctools.com
Conical
Chisel
Bevel
Conical
bent
Knife
Stainless
steel chisel
High thermal
performance
111111
C105 / C115
Changing Grips
1. Inserting
First put the slide-on
tabs into the new grip,
then push the grip
with the tabs onto the
handle.
Grip for NT115
Ref. N8662
Nano Handle
Changing the Tip Cleaning System
1
2. Removing Tabs
Hold the grip and pull
the tab. Use a pliers if
necessary
Tabs
Replace the tip cleaning system:
- Brass wool
- Metal brush
2
Press back the tap (1) to remove the cleaning
system (2).
121212
Remove the drawer from the splashguard.
Maintenance
para manuales - color gris
Before carrying out maintenance, always switch the device off and disconnect it from the mains.
Allow the equipment to cool down.
- Clean the station screen with a glass
cleaner or a damp cloth.
- Use a damp cloth to clean the casing and
the tool. Alcohol can only be used to clean
the metal parts.
- Periodically check that the metal parts of
the tool and stand are clean so that the
station can detect the tool status.
- Maintain tip surface clean and tinned prior
to storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat
transfer to the solder joint.
- Periodically check all cables and tubes.
- Replace any defective or damaged pieces.
Use original JBC spare parts only.
Clean periodically
- Replace a blown fuse as follows:
1. Pull of f the fuse holder and remove the
fuse. If necessar y use a tool to lever it off.
Fuse holder
2. Press the new fuse into the fuse holder
and replace it in the station.
- Repairs should only be performed by a JBC authorized technical service.
Fuse holder
Fuse
131313
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded before
use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode. The
soldering tip or nozzle, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working
to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced physical,
sensor y or mental capabilities or lack of experience provided that they have been given adequate
supervision or instruction concerning use of the appliance and understand the hazards involved.
Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
141414
Specifications
para manuales - color gris
NAN
2-Tool Nano Soldering Station
Ref.: NANE-9C 100V 50/60Hz. Input fuse: 0.5A. Output: 8.5V
Ref.: NANE-1C 120V 50/60Hz. Input fuse: 0.5A. Output: 8.5V
Ref.: NANE-2C 230V 50/60Hz. Input fuse: 0.2A. Output: 8.5V
- Output Peak Power: 14W per tool
- Temperature Range: 90 - 450 °C / 190 - 840 ºF
- Idle Temp. Stability (still air): ±1.5 ºC / ±3 ºF (meets and exceed IPC J-STD-001F)
- Temp Accuracy: ±3% (using reference cartridge)
- Temp Adjustment: ±50ºC / ±90ºF (through station menu setting)
- Tip to Ground Voltage/Resistant: Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
- Connections: USB-A / USB-B / Pedal connectors
RJ12 connector for Robot
- Ambient Operating Temp: 10 - 50 ºC / 50 - 122 ºF
- Control Unit Dimensions: 140 x 170 x 125 mm
(L x W x H) 5.51 x 6.69 x 4.92 in
- Total Net Weight: 2.45 kg / 5.40 lb
- Total Package Dimensions/ Weight: 280 x 280 x 164 mm / 2.94 kg
(L x W x H) 11.02 x 11.02 x 6.46 in / 6.48 lb
Complies with CE standards
ESD Safe
1515
15
Warranty
para manuales - color gris
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the de aler where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 3 0 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facilit y.
0029451-150622
Loading...