INSTRUCTION MANUAL
JTT
Heater Hose Set
This manual corresponds to the following references:
para manuales - color gris
JT-T 1A (110V/120V)
JT-T 2A (230V)
Packing List
The following items are included:
Handle for JTT ... 1 unit
Re f. JT- A
Manual ................... 1 unit
Ref. 0029044
JTH
Heating Element for JTT ...... 1 unit
according to purchased reference incuded
either JTH1 Ref. 0014105 (100V/120V)
or JTH2 Ref. 0 014107 (230V )
Changing JTT Heater Hose Set
Note: Only perform this operation when
the station is turned off.
Use a spanner to unscrew the nut (1) and
remove the tool hose (2).
Insert the new hose, make
sure it is pushed all the way
into the connector (2), and
tighten the nut (1).
2
OK
TC
Suction
2
1
TC
Suction
OK
TC
Suction
OK
Features
para manuales - color gris
JTT Heater Hose Set allows to repair medium and large SMDs. It
works with JTU Control Unit and JT Nozzles.
Replacing the Heating Element
JTH
Heating Element for JTT
Ref. 0014105 (100V and 120V)
Tool Button:
Start/stop blowing hot air
Ref. 0014107 (230V )
Handle for JTT
Re f. JT- A
(100V / 120V / 230V)
1
2
JTT
Heater Hose Set
Ref. JT-T1A (110V, 120V)
Re f. JT-T 2A (230V )
Note: Only perform this operation when the heating element is cold
and the unit is disconnected from the mains.
Loosen the screw (1) and pull the worn heating element out of the
handle (2).
Insert the new heating element, make sure its pushed all the way in
(2) and tighten the screw (1).
* not included, sold separately
JT Nozzle*
3
para manuales - color gris
Specifications
JTT
Heater Hose Set
Ref.: JT-T 1A (110V/120V)
Ref.: JT-T 2A (230V)
- Hose Length: 1100 mm / 43.31 in
- Total Net Weight: 370.5 g / 0.817 lb
- Package Dimensions/Weight: 382 x 159 x 81 mm / 508.8 g
(L x W x H) 15.04 x 6.26 x 3.19 in / 1.122 lb
Complies with CE standards.
ESD safe.
Warranty
JBC’s 2 year war ranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage pai d, to
the dealer where it wa s purchased.
This pro duct should not be thrown in th e garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of i ts life must be collected and returned to an
authorized recycling facility.
0029044-130522
Loading...