INSTRUCTION MANUAL
H2994, H4706,
H4720, H4719
Tool Holders for
Compact Stations
This manual corresponds to the following references:
00 12994 H2994 for CDB & CDS
001470 6 H4706 for CA and CF
001472 0 H4720 for CS
0014719 H4719 for CP
Packing List
The following items are included:
Tool Holder................. 1 unit
according to purchased reference
Manual ....................... 1 unit
Ref. 0028656
Replacement
Before carrying out maintenance, always unplug the tool.
Allow the equipment to cool down. Be sure that the power
supply is disconnected before changing any spare part.
2
Changing the Tool Holder
Turn the station off and allow the equipment to cool down.
Remove the locking knob (1) and separate the holder from the
station. Then remove the connection screw (2).
Connection
Screw
max.
15 mm
Locking
Knob
1
2
Pull the tool holder gently until the connector comes out.
Connector
Too l
Holder
Place the new tool holder following the same steps conversely.
3
para manuales - color gris
Specifications
H2994, H4706, H4720, H4719
Tool Holders for Compact Stations
Ref.: 00 12994 H2994 for CDB & CDS
Ref.: 001470 6 H4706 for CA and CF
Ref.: 001472 0 H4720 for CS
Ref.: 0014719 H4719 for CP
- Package Dimensions: 111 x 81 x 41 mm
(L x W x H) 4.37 x 3.19 x 1.61 in
Complies with CE standards
ESD Safe
Warranty
JBC’s 2 year war ranty c overs this equipment against all manufacturing d efects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equ ipment must be returned, postage pa id, to
the dealer where it was purchased.
This pro duct should not be thrown in the garbag e.
In accordance with the European directive 2012/19/EU, electronic
equipment at the e nd of its life must be collecte d and returned to an
authorized recycling facility.
0028656-291122
Loading...