INSTRUCTION MANUAL
ESHT
Extractor Stand for Hot Air
This manual corresponds to the following reference:
ES HT- A
Packing List
The following items are included:
Extractor Stand ..........................................1 un it
Accessory Set for ESHT ......................... 1 unit
Ref. 0027797 includes:
Potectors
Ref. P2220 .... 1 unit
P2230 .... 1 unit
P2235 .... 1 unit
P4000 .... 1 unit
P4010 .... 1 unit.
Tripod s
Ref. T2050 .... 1 unit
T225 0 .... 1 unit
Manual ...........................................................1 unit
Ref. 0027965
Suction Tube
Ref. 0932330 .... 1 unit
Extractors
Ref. E2184 .... 1 unit
E2064 .... 1 un it
E2052 .... 1 unit
Suction Cup Set
Ref. 0930110 .... 1 unit
includes:
Cup Ref. 0934050 - Ø 10 (x3)
Cup Ref. 0934070 - Ø 4.7 (x3)
2
para manuales - color gris
Features and Connections
Activates the Suction Pump
JTU Control Unit
not included, sold separately
Suction Tube
Ref. 0932330
For tripods and extractors
Extractor
Ref. see page 2
3
Operation
Position the extractor with the
appropriate suction cup and
press the suction button.
2. Heating
Heat the component.
3. Extracting1. Placing
The component lifts off
automatically when the
solder melts.
Protectors & Extractors
For small components (fig. 1 and 2). For large components (fig. 3 and 4).
We recommend using the protector + tripod We recommend using the manual extractors
1 2 3 4
4
para manuales - color gris
Accessories
Protectors
No.* Ref. AxB (mm) AxB (in) No.* Ref. AxB (mm) AxB (in)
P3353 4,3 x 3 0.1 6 x 0 .12 P1249 12 x 23 0.47 x 0.9
P3786 5,2 x 5,2 0.20 x 0.20 44 P4000 12,5 x 12,5 0.49 x 0.49
P3352 5,2 x 7,5 0.20 x 0.29 P3354 13,2 x 13, 2 0.52 x 0.52
P3355 5,2 x 9,5 0.20 x 0.37 P4025 13,5 x 21,5 0.53 x 0.85
P3356 6,2 x 4,2 0.24 x 0.16 48 P2230 15 x 15 0.59 x 0.59
P3785 7, 2 x 7,2 0.28 x 0.28 60 P4010 17 x 17 0.67 x 0.67
P3784 8,2 x 8,2 0.32 x 0.32 P4005 18 x 29 0.71 x 1.14
P4035 9 x 13 0.35 x 0.51 P4030 18,5 x 18, 5 0.73 x 0.73
P4040 9,5 x 19 0.7 x 0.74 P1068 18,5 x 24 0.73 x 0.94
P4080 9,5 x 21 9.5 x 0.83 P2685 28,5 x 28,5 1.12 x 1.12
32 P2220 10 x 10 0.39 x 0.39 P408 5 31,5 x 31,5 1. 24 x 1.24
P4045 10,5 x 21 0.14 x 0.82 P2672 33 x 46 1.30 x 1.18
P4090 11 x 16 0.43 x 0.63 P4002 50 x 50 1.97 x 1.97
24 P2235 12 x 17 0.47 x 0.67 P3357 52,5 x 14 2.06 x 0.55
Extractors
No.* Ref. AxB (mm) AxB (in) No.* Ref. AxB (mm) AxB (in)
52 E2052 20 X 20 0.79 x 0.79 E4015 3 1,5 X 31,5 1. 24 x 1.24
64 E2064 20 X 26 0.79 x 1.02 E2084 33 X 33 1.30 x 1.3 0
80 E2184 24 X 24 0.94 x 0.94 E2100 38 X 38 1.50 x 1.5 0
E2068 27 X 27 1.0 6 x 1.06 E2 124 45 X 45 1.77 x 1.77
E4020 28,5 X 28,5 1.1 2 x 1.12
Tripod s
Ref. øC (mm) øC (in)
T2050 39 1.5 3
T2250 85 3.35
Manual extractor
Ref. øD (mm) øD (in)
E2190 7 0.27
øD
* Position in Extractor Stand
5
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the equipment for any purpose other than PCB rework. Incorrect use may cause fire.
- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working
to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced physical,
sensor y or mental capabilities or lacking experience provided that they have been given adequate
supervision or instruction concerning use of the appliance and understand the hazards involved.
Children must not play with the appliance.
- Maintenance must not be carried out by children unless super vised.
6
para manuales - color gris
Notes
7
para manuales - color gris
Specifications
ESHT
Extractor Stand for Hot Air
Ref. ESHT-A
- Total Net Weight: 1.09 kg / 2.41 lb
- Total Package Dimension 320 x 140 x 120 mm / 12.60 x 5.51 x 4.72 in
(L x H x W)
Complies with CE standards.
ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 3 0 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
0027965-080622
Loading...