www.jbctools.com
INSTRUCTION MANUAL
ESD Tip Cleaner
Ref. CL8499
Packing list
The following items should be included:
ESD Tip Cleaner ........... 1 uni t
Ref. CL8499
Sponge ............................ 1 un it
Ref. S0354
Brass Wool ..................... 1 unit
Ref. C L6 210
Features
Improve thermal transfer by cleaning the tip after each solder joint.
Brass wool
Ref. C L6 210
Very ef fective cleaning
method. It leaves a small
layer of solder on the tip to
prevent oxidation bet ween
cleaning and rewetting.
Splashguard
Ref . 0017576
It prevents splashing of
solder particles when
using the brass wool.
Manual ............................ 1 unit
Re f. 00188 06
www.jbctools.com
ESD Tip Cleaner
Ref. CL8499
Sponge
Ref. S0354
The least harmful
cleaning method. Keep
the sponge damp with
distilled water when
working to avoid tip wear.
Non-slip base
No need to hold the
base while cleaning tips.
Antisplash
Membrane
Ref. 0 0175 74
Prevents splashing
to maintain the
work area clean.
2
ESD Tip Wiper
Ref. CL0240
A temperature resistant
receptacle lets the
operator remove
excess solder by gentle
tapping or wiping.
Tapping:
Tap to remove
excess solder.
Wiping:
Use the slots to remove
remaining particles.
Wool Replacement
www.jbctools.com
1
Metal Brush replacement
1
Tip Wiper replacement
1
2
2
2
Wiper can be easily removed for cleaning.
Membrane replacement
1
Loosen the screw and remove all components before removing the membrane.
Once positioned, place the components again.
2 3
3
Specifications
Weight: 0,9 kg (1.9 lb)
Dimensions: 113 x 94 x 90 mm (4.45 x 3.70 x 3.54 in)
ESD Safe.
Complies with CE standards.
Warranty
JBC’s two-year warrant y covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour. Warranty
does not cover product wear or misuse. In order for
the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased.
Register your warranty within 30 days of purchase
in www.jbctools.com/productregistration
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facilit y.
Manual in other languages available on our website
www.jbctools.com
00 188 06 - 0318
Loading...