www.jbctools.com
INSTRUCTION MANUAL
CDES
Precision Soldering-Assistant Station
This manual corresponds to the following references:
CDE-9SQA (10 0V )
CD E-1SQ A (120V )
CDE-2SQA (230V)
Packing List
The following items are included:
Control Unit ................................................ 1 unit
Power Cord ................................................. 1 unit
Ref. 0024092 (100V)
0023715 (120V)
0023714 (230V)
Sponge ........................................................ 1 unit
Ref. S0354
2
Precision Purpose Handle ............... 1 unit
Ref. T210-A
Brass Wool ............................................. 1 u ni t
Ref. C L6 210
Manual ....................................................... 1 unit
Re f. 0 0 269 41
Features and Connections
www.jbctools.com
Process Screen
USB-A Connector
Cartridge Storage
Quick Tip Changer
Adjustable Stand:
Intelligent
Heat Management
Cable Collector
Tip Cleaner Brass Wool
with Antisplash Membrane
and Wiper
Precision Purpose
Handle
Ref. T210-A
Pedal Connector
Main Switch
Fuse
Equipotential Connection
USB-B Connector
Earthing Fuse
Fume Extractor Connector
PeripheralsPower Socket
3
Hibernation
Tool in the stand
Actual Temp: 140ºC
25% 75%
Power C210009
50%
19:29
Sleep
Tool in the stand
Actual Temp: 290ºC
Delay to hibernation: 9:43
25% 75%
Power C210009
50%
19:2919:29
CDES Work Screen
The CDE offers an intuitive user interface which provides quick access to station parameters.
Original PIN: 0105
System
Notifications
Current Tip
Temperature
Power
Indicator
325 ºC
Power C210009
50%
25% 75%
Sel. temp.
325ºC
Selected
Temperature
Selected Cartridge
Typ e
Menu
System Notifications (Status Bar)
USB flash drive is connected.
Station is controlled by a PC.
Warning. Press INFO for failure description.
Station sof tware update. Press INFO to start the process.
Error. Press INFO for failure description, the type of error and how to proceed.
Troubleshooting
Station troubleshooting available on the product page at www.jbctools.com
4
Help Information
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
350
Sel. temp. 350ºC
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
1.3s
8W·s
ºC
38%
19:29
150
Time
C210-008
ºC
SOLDERING JOINT INFO
Sel. temp.
Cartridge
Time
Max temp
Min temp
Energy
Result
Last
Ref. Diff.
350ºC 350ºC
C210009
2.4s
350ºC
335ºC
13W·s
2.3s
C210009
350ºC
340ºC
14W·s
95%
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
www.jbctools.com
Soldering Assistant
The Soldering Assistant allows to analyze and compare manual soldering processes in real time,
obtaining a qualification of the process.
The station compares all new solderings with the reference soldering profile. According to the
soldering performed the station gives the user feedback, displaying a color - red or green - along
with the percentage of similarity.
Soldering Assistant Main Screen
Actual Soldering
Soldering Reference
Tip Temperature
Whi te Cu rve:
Red Cur ve:
Actual Power
Power
Blue Curve:
Selected
Temperature
19:29
20
16
12
8
4
W%
350
Sel. temp. 350ºC
Ok to reset soldering Ref.
C210009
ºC
Time
Energy
94%
0.5s/div
Ref.
2.2s
18W·s
355
350
345
340
335
ºC
2.4s
17W·s
Percentage of
Similarity
Temperature
Cartridge Model
Soldering Time
Soldering Energy
Current Soldering
Reference Soldering
5
325
º
25% 75%
Power C210009
50%
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
OK
325 ºC
Sel. temp.
325ºC
25% 75%
Power C210009
50%
Sleep
Tool in the stand
Actual Temp: 290ºC
Delay to hibernation: 9:43
25% 75%
Power C210009
50%
19:2919:29
C210009
Cartridge
Back
0.5s/div
Ok to set up soldering Ref.
20
16
12
8
4
355
350
345
340
335
350
Sel. temp. 350ºC
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
---
---
ºC
19:29
Ok to reset soldering Ref.
20
16
12
8
4
350
Sel. temp. 350ºC
W%
Time
Energy
C210009
ºC
19:29
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
Ok to reset soldering Ref.
20
16
12
8
4
180
Sleep
W%
Time
Energy
C210009
ºC
19:29
Selected
Min 200 Max 400
350 ºC
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
Basic
Soldering-Assistant
Back
Mode
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
180
Sleep
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
---
---
ºC
19:29
Selected
Min 200 Max 400
350 ºC
Ok to set up soldering Ref.
20
16
12
8
4
350
Sel. temp. 350ºC
W%
Time
Energy
C210009
ºC
19:29
Basic
Soldering-Assistant
Back
Mode
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
1. Soldering Assistant Activation
Access to station menu by pressing .
2. Cartridge Selection
Access to station menu by pressing .
OK
3. Work Temperature Selection
Change temperature (from 90 to 450ºC). Use and buttons.
19:29
20
16
12
8
4
W%
180
Sleep
6
Ok to reset soldering Ref.
Selected
Min 200 Max 400
350 ºC
C210009
ºC
Time
Energy
0.5s/div
Ref.
2.3s
14W·s
355
350
345
---
---
340
335
ºC
Ok to reset soldering Ref.
20
16
12
8
4
350
Sel. temp. 350ºC
W%
Time
Energy
C210009
ºC
19:29
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
350
Sel. temp. 350ºC
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
---
---
ºC
19:29
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
350
Sel. temp. 350ºC
W%
ºC
Time
Energy
C210009
Ref.
2.2s
18W·s
2.4s
17W·s
ºC
94%
19:29
Ok to reset soldering Ref.
20
16
12
8
4
350
Sel. temp. 350ºC
W%
Time
Energy
C210009
ºC
19:29
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
19:29
1s/div
150
Time
C210-008
Ref. .
4.5s ---
ºC
SOLDERING JOINT INFO
1/3
Sel. temp.
Cartridge
Time
Max temp
Min temp
Energy
Result
Last
Ref. Diff.
350ºC 350ºC
C210009
2.4s
350ºC
335ºC
13W·s
2.3s
C210009
-2%
350ºC
+0%
340ºC
-1%
14W·s
+29%
95%
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
350
Sel. temp. 350ºC
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
1.3s
8W·s
ºC
38%
19:29
150
Time
C210-008
ºC
SOLDERING JOINT INFO
Sel. temp.
Cartridge
Time
Max temp
Min temp
Energy
Result
Last
350ºC 350ºC
C210009
2.4s
350ºC
335ºC
13W·s
95%
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
4. Acceptance Limits Setting
www.jbctools.com
The JBCs default percentage is:
20
16
12
8
4
W%
Sel. temp. 350ºC
Red percentage:
Less energy was applied (white curve)
than the reference (blue curve), therefore
less time. The result could be a solder
joint with few tin, not evenly distributed
or a cold solder joint.
Note: To modify acceptance limits access to station menu: General Settings/Red Limits.
5. Soldering Reference Setup
When the calibration is finished, perform a soldering joint and press to set up the reference.
19:29
20
16
12
8
4
W%
Sel. temp. 350ºC
Ok to reset soldering Ref.
350
Ok to set up soldering Ref.
350
C210009
ºC
Time
Energy
C210009
ºC
Time
Energy
White: last soldering
0.5s/div
Ref.
2.3s
14W·s
0.5s/div
Ref.
---
---
38%
61-100%0-6 0%
355
350
345
340
335
ºC
1.3s
8W·s
355
350
345
340
335
ºC
2.3s
14W·s
19:29
20
16
12
8
4
W%
Ok to reset soldering Ref.
350
Sel. temp. 350ºC
ºC
C210009
Time
Energy
Green percentage:
There is a huge similarity between two
solder joints (white and blue cur ves) and
the amount of provided energy.
19:29
20
16
12
8
4
W%
Ok to reset soldering Ref.
350
Sel. temp. 350ºC
ºC
Blue: reference soldering
C210009
Time
Energy
355
94%
350
345
340
335
0.5s/div
Ref.
2.2s
18W·s
0.5s/div
Ref.
2.3s
14W·s
ºC
2.4s
17W·s
355
350
345
340
335
ºC
---
---
7
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
OK
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
350
Sel. temp. 350ºC
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
1.3s
8W·s
ºC
38%
19:29
150
Time
C210-008
ºC
SOLDERING JOINT INFO
Sel. temp.
Cartridge
Time
Max temp
Min temp
Energy
Result
Last
350ºC 350ºC
C210009
2.4s
350ºC
335ºC
13W·s
95%
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
6. Working With Soldering Assistant
Perform solderings and the station will compare them with the soldering reference.
19:29
20
16
12
8
4
W%
Ok to reset soldering Ref.
350
Sel. temp. 350ºC
ºC
C210009
Time
Energy
0.5s/div
Ref.
2.2s
18W·s
94%
355
350
345
340
335
ºC
2.4s
17W·s
7. Soldering Joint Information Screen
By pressing the access to the detailed parameters for each solder joint.
With and you can select the curve comparision of the last five solder joints.
SOLDERING JOINT INFO
Last
Sel. temp.
Cartridge
Time
Max temp
Min temp
Energy
150
Result
350ºC 350ºC
C210009
2.4s
350ºC
335ºC
ºC
13W·s
95%
C210-008
Time
Ref. Diff.
C210009
2.3s
350ºC
340ºC
14W·s
1/3
-2%
+0%
1s/div
-1%
Ref. .
+29%
4.5s ---
8
Hibernation
Tool in the stand
Actual Temp: 140ºC
25% 75%
Power C210009
50%
19:29
Sleep
Tool in the stand
Actual Temp: 290ºC
Delay to hibernation: 9:43
25% 75%
Power C210009
50%
19:29
Hibernation
Tool in the stand
Actual Temp: 140ºC
25% 75%
Power C210009
50%
19:29
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
www.jbctools.com
Operation
The JBC Most Efficient Soldering System
This revolutionar y technology is able to recover tip temperature extremely quickly. This allows the
user to work at a lower temperature. As a result, tip life increases by 5.
1. Wo rk 2. Sleep 3. Hibernation
Long time in
the stand
When the tool is lifted from the
stand the tip will heat up to the
selected temperature.
19:29
325 ºC
Power C210009
50%
25% 75%
Sel. temp.
325ºC
· Change temperature
(from 90 to 450ºC)
Steps ± 5
Through menu settings:
· Select temperature levels
· Fix one temperature
When the tool is in the stand,
the temperature falls to the
preset sleep temperature.
19:29
Sleep
Tool in the stand
Actual Temp: 290ºC
Delay to hibernation: 9:43
Power C210009
50%
25% 75%
Through menu settings:
· Change Sleep temperature
· Set Sleep delay
(from 0 to 9 min or no Sleep)
After longer periods of
inactivity, the power is cut off
and the tool cools down to
room temperature.
19:29
Hibernation
Tool in the stand
Actual Temp: 140ºC
Power C210009
50%
25% 75%
Through menu settings:
· Change Hibernation delay
(from 0 to 35 min)
9
ø 1
ø 3,5
A
B
Language
Mode
Station Settings
Language
Mode
Station Settings
Tool Settings
Language
Mode
Station Settings
Tool Settings
Quick Tip Changer
Save time and change cartridges safely without switching the station off.
1. Removing 2. Inserting 3. Fixing
B
A
C
Place the handpiece in the
extractor and pull to remove
the cartridge.
Place the handpiece on top
of the new car tridge and
press down slightly.
Use the holes for fixing the
cartridge* as follows:
A. For straight C210.
B. For curved C210.
C. For C245.
*Important: It is essential to insert the cartridges as far as the mark for a proper connection.
Mark
Mark
Compatible Cartridges
Compatible Cartridges
This stations work with C245 Cartridges and T245 Handles.
The CDES stations work with C210 cartridges and T210 handles.
Find the model that best suits your soldering needs in w ww.jbctools.com
Find the model that best suits your soldering needs in w ww.jbctools.com
10
Conical Chisel Conical
Bent
Bevel
Special
Models
www.jbctools.com
Changing the Grips
Replace the grips easily using the slip-on tabs. Note: Choose the correct grip depending on your handle
model.
Handle ref.: T245-A / T245-C / T245-GA T210-A / T210-NA T245-PA T210-PA
Grip ref.: 0016057 (green) 0018658 (green) 0021528 (blue) 0023310 (blue)
1. Inserting Tabs 2. Inserting Handle 3. Removing Tabs
tabs
new grip
Put the slide-on tabs into the
new grip.
Push the grip with the tabs
onto the handle.
Hold the grip and pull the tab.
Use pliers if necessary.
Sealing Plug Replacement
The sealing plug prevents undesirable flux vapors or particles from entering inside the tool. Its usage
is highly recommended for intensive applications when soldering is exposed to FOD environments or
for applications where the soldering iron works close to vertical position. Note: Choose the correct
sealing plug depending on your handle model.
Handle ref: T245 / T470 T210
Sealing plug ref.: OB2000 OB1000
Before replacing the sealing plug, unplug the power supply and make sure the device is not hot.
2. Mounting Position 3. Inserting Sealing Plug1. Removing Sealing Plug
Sealing
Plug
Handle
Enter, not deeper than 8mm,
a small shaft or screwdriver,
lift and pull the sealing plug.
Never use a cartridge to do
this operation.
Note: The chamfered side has
to be positioned towards the
handle.
Push the sealing plug inside
the handle until the sealing
plug and handle edges are
aligned.
11
OK
OK
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Adjustable Stand Cable Collector (Ref. CC1001)
Adjust the tool stand to suit
your work position.
The cable collector keeps the cable away from the work area and
prevents that the weight of the cable from disturbing the operator
while soldering.
Insert the cable into the clip
and then insert into the cable
collector. Do not leave the
cable longer than necessary
The cable collector is flexible.
It accompanies and adapts
to the movements during the
soldering process.
to reach the work area freely.
Tip Cleaner
Select the option to suit your needs and improve the thermal transfer of the tip.
Splashguard
Ref . 0017576
When using the brass wool, it prevents
splashing of solder particles.
Antisplash Membrane
Ref. CL7882
Prevents splashing and keeps
the work area clean.
Brass Wool
Ref. C L6 210
Very effective cleaning
method. Leaves a
small layer of solder
on the tip preventing
oxidation between
cleaning and rewetting.
12
If the tip is ver y dirty,
JBC recommends first
cleaning it with the wiper
Wiper
to remove excess solder.
Ref. CL7984
A temperature resistant receptacle for removing
excess solder by gently tapping or wiping.
OK
Language
Mode
Station Settings
Tool Settings
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
Language
Mode
Station Settings
Tool Settings
Counters
Removing the Splashguard
1. Unlock the splashguard. 2. Lift off.
Lock
More cleaning options (not supplied):
www.jbctools.com
Inox Wool
Ref. CL6205
Stronger cleaning
method than brass
wool.
Wiper
Ref. CL7984
Tapping:
Tap gently to remove excess
solder.
Wiping:
Use the slots to remove
remaining particles.
Metal Brush
Ref. CL6220
When used carefully,
it provides a more
thorough cleaning.
Sponge
Ref. S0354
The softest cleaning method.
Keep the sponge damp with
distilled water when working
to avoid tip wear.
13
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
180
Sleep
W%
ºC
Time
Energy
C245907
Ref.
2.3s
14W·s
---
---
ºC
19:29
Selected
Min 200 Max 400
350 ºC
0.5s/div
Ok to reset soldering Ref.
20
16
12
8
4
355
350
345
340
335
180
Sleep
W%
ºC
Time
Energy
C210009
Ref.
2.3s
14W·s
---
---
ºC
19:29
Selected
Min 200 Max 400
350 ºC
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
Basic
Soldering-Assistant
Back
Mode
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
Basic
Soldering-Assistant
Back
Mode
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C245907
Cartridge
Back
Menu Settings
The menu gives acces to the following menu entries:
Select station language
Choose between “Basic” and “Soldering Assistant”
See table below
See table page 15
Shows a register of solder joint values,
use for more information
Reset to default parameters
Return to main menu
Parameters
Be careful when changing these parameters as they may reduce the tip life if not used properly.
Please follow the recommended guidelines:
Station Settings
Recommendations Parameter Description Warnings
Program Version
Shows the program version
number.
Maximum Temperature
Set the maximum
temperature to work with.
Max. temp by default is 400°C
(750°F). This is considered
high enough to work with
most lead-free applications.
Minimum Temperature
Set the minimum temperature
to work with.
Min. temp. by default is 200ºC
(392ºF ). This is considered to
be a proper starting point for
leaded applications.
14
The station temperature
range is 90-450ºC
(190-840ºF). Change the
temperature limits when
working with less common
applications such as low / high
melting point soldering (HMP)
or plastics (e. g. riveting).
working with temperatures
over 400°C (750°F) can
damage the PCB and its
components. Even in short
time periods of tip contact
with the soldering joint, the
In most cases,
flux may not work properly
and could seriously reduce
tip life. If the solder joint
requires more power
(e.g. multilayered or high
dissipation boards), JBC
strongly recommends to
use preheaters.
Station Settings
PIN
Change the default security
PIN number (0105).
Sound
Enable/disable the beep
sound of the keypad.
Temp Units
Celsius (ºC) or Fahrenheit (ºF)
Date & Time
Set the Date and the Time.
Tool Settings
www.jbctools.com
Recommendations Parameter Description Warnings
The PIN must be entered every
time a parameter is changed.
Cartridge
Select the cartridge.
Temp Adju s t
It provides a more precise
adjustment between the
selected temperature and the
current one.
RecommendationsParameter Description
Set values within ±50°C
(± 90°F) to achieve zero
deviation. JBC strongly
recommends the use of TID-A
or TIA-A Thermometers to
obtain precise readings.
Warnings
When the user changes
the cartridge type, the
parameter should be reset
to 0°C/F or to the value
needed for this cartridge.
E.g. If a correction of
+20°C (+36°F) is set for the
C245966 (thick type) and
then the user changes the
cartridge for a C245030
(which is thinner) without
resetting, they would be
working at a temperature
of +20°C (+36°F) lower for
the C245030 which does
not need any temperature
adjustment.
15
Tool Settings
Temp Level Set
The user can set up to 3 dif ferent temperatures.
Sleep Delay
Set the time that the tool
will remain at the selected
temperature when in the stand
before entering sleep mode.
The tip temperature will then
drop to the Sleep temperature.
Sle e p Temp
This is the set temperature the
tip reaches when returned to
the stand.
Recommendations Parameter Description
Switch between 3 dif ferent
leves by just one “click”. Set
them according to the allowed
values for your soldering
applications.
Because our tools reach the
working temperature from the
deafult Sleep mode in only a
few seconds, this parameter is
preset to 0 min. Once the tool
is returned to the stand the
temperature will automatically
drop to the sleep temperature,
extending tip life and avoiding
oxidation. Retinning the tip
before placing the tool in the
stand will protect the tip and
extend its life.
The sleep temperatures are
set to achieve a balance
between preventing oxidation
and reaching the working
temperature in a few seconds.
Warnings
Setting these
parameters to higher values
will unnecessarily accelerate
oxidation and shorten tip life
especially when working.
Hibernation Delay
Set the time the tool will
remain at Sleep temperature
before entering the Hibernation
mode. At this time, the power
supply is cut off and the tip
remains at room temperature.
Peripherals
Link connected peripherals
16
This function completely
protects the tip from oxidation
during long periods of
inactivity while the tool is in the
stand.
Retinning the tip before
placing the tool in the stand
also helps prevent oxidation
and extends the life of the tip.
Increasing the default
value will accelerate
oxidation and shorten the
tip life.
ºC
ºF
A
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
Basic
Soldering-Assistant
Back
Mode
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
C210009
Cartridge
Back
Language
Mode
Station Settings
Tool Settings
Counters
Reset
Exit
www.jbctools.com
USB Connectors
Download the latest software from our website to improve your soldering station.
Station Update
Download the JBC Update
File from www.jbctools.
com/software.html
Update
Insert the USB flash drive
with the file downloaded to
the station.
JBC Web Manager
www.jbctools.com/manager.html
Manage and monitor as many stations as your PC can handle by using the JBC Web Manager.
You can export data to another PC.
OK
Cable USB AB
USB
Hub
JBC Web
Manager
any JBC
station
Manager Settings
Change settings for a
group of JBC stations
at the same time.
Register Settings
Create graphs of the
soldering process in
real time with power
and temperature data.
17
EARTHING FUSE
AUX
USE ONLY WITH A 250 V FUSE
Maintenance
Before carrying out maintenance, always switch the device off and disconnect it from the mains.
Allow the equipment to cool down.
Fuse
holder
Clean
periodically
TOOL
- Clean the station screen with a glass
cleaner or a damp cloth.
- Use a damp cloth to clean the casing and
the tool. Alcohol can only be used to clean
the metal parts.
- Periodically check that the metal parts
of the tool and stand are clean so that the
station can detect the tool status.
- Maintain tip surface clean and tinned prior
to storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat transfer
to the solder joint.
- Periodically check all cables and tubes.
- Replace any defective or damaged pieces.
Only use original JBC spare parts.
- Replace a blown fuse as follows:
1. Pull off the fuse holder and remove the
fuse. If necessar y use a tool to lever it off.
2. Insert the new fuse into the fuse holder
and return it to the station.
EARTH
FUSE
- When this warning appears on the
AUX
main screen Earthing Fuse must be replaced
- Repairs should only be performed by a JBC authorized technical service.
18
USE ONLY WITH A 250 V FUSE
EARTHING FUSE
www.jbctools.com
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cable must be plugged into approved bases. Make sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot after the station
is turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced
physical, sensory or mental capabilities or lacking experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
19
Notes
Notes
20
Notes
www.jbctools.com
21
Notes
22
www.jbctools.com
Specifications
CDES
Precision Soldering-Assistant Station
Ref.: CDE-9SQA 100V 50/60Hz. Input fuse: T2A. Earthing fuse: F1.25 A. Output: 23.5V.
Ref.: CDE -1SQA 120V 50/60Hz. Input fuse: T2A. Earthing fuse: F1.25 A. Output: 23.5V.
Ref.: CDE-2SQA 230V 50/60Hz. Input fuse: T1A. Earthing fuse: F1.25 A. Output: 23.5V.
- Output Peak Power CDE-BA: 40W
- Temperature Range: 90 - 450 °C / 190 - 840 °F
- Idle Temp. Stability (still air): ±1.5ºC / ±3ºF (Meets and exceed IPC J-STD-001)
- Temp. Accuracy: ±3% (Using reference cartridge)
- Temp. Adjustment: ±50ºC / ±90ºF (Through station menu settings)
- Tip to Ground Voltage/Resistance: Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
- Earthing Fuse: F 1.25A
- Connections: USB-A Uptade and files import-export
USB-B Connection Station-PC
RJ12 Connector
- Ambient Operating Temp: 10 - 50 ºC / 50 - 122 ºF
- Control Unit Dimensions / Weight: 170 x 176 x 145 mm / 2.8 kg
(L x W x H) 6.7 x 6.9 x 5.7 in / 6.17 l b
- Total Net Weight: 2.9 kg / 6.39 lb
- Total Package Dimensions / Weight: 234 x 234 x 258 mm / 3.47 kg
(L x W x H) 9.2 x 9.2 x 10.2 in / 7.65 lb
Complies with CE standards.
ESD protected housing.
23
Warranty
para manuales - color gris
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 3 0 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
0026941-1021
Loading...