www.jbctools.com
INSTRUCTION MANUAL
Adjustable Micro Tweezers
Ref. AM120-A
Packing List
The following items are included:
Adjustable Micro Tweezers ...............1 unit
Ref. AM120-A
Manual ...................................................1 unit
Ref. 0025072
www.jbctools.com
INSTRUCTION MANUAL
Adjustable Micro Tweezers
Ref. AM120-A
2
Features
www.jbctools.com
Control Unit
C120 Cartridges
(Required but not supplied)
Stand
Ref. AM-SA
(Required but not
supplied)
Adjustable Micro Tweezers
Ref. AM120-A
3
AM120 Changing cartridges
1. Removing
2. Positioning
3. Inserting
Place the cartridges in the extractor and pull
the tweezers to remove them.
Place the tweezers on top of the new cartridge
and slightly press down.
Use the grooves to insert the cartridges as
far as the mark*.
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
Mark
4
1
2,5
4. Rotational Cartridge Alignment
5. Vertical Cartridge Alignment
www.jbctools.com
Slightly turn the wheels to align the cartridges
as required.
The rear wheel allows the cartritges to be
equally aligned when you close the tweezers.
Compatible cartridges
The AM12 0-A works with C12 0 cartridge range. Find the model that best suits your soldering
needs in www.jbctools.com
Conical Bent
Blade
Chisel Bent
5
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
6
Notes
www.jbctools.com
7
Specifications
- Weight: 100 g (0.2 lb)
- Max. power per cartridge: 40W
Complies with CE standards
ESD Safe
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 3 0 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
www.jbctools.com
0025072-0520
Loading...