Stand for JT
Ref. JT-SD
www.jbctools.com
Packing List
The following items should be included:
Stand for JT ................................................ 1 unit
Ref. J T-SD
Manual ......................................................... 1 unit
Ref. 0016868
Stand for JT
Ref. JT-SD
Features
Adjust the tool holder angle to suit your work
position.
Removing the Nozzles
Used to remove the JT Nozzles.
Adjustable Stand
Power Socket
Fuse
USB connector
Robot RS232 connector
P-005 Pedal connection
Equipotential
connector
Auxiliar connector
Stand
Ref. J T-SD
2
www.jbctools.com
Maintenance
Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
- Use a damp cloth to clean the stand. Alcohol can only be used to clean the metal parts.
- Periodically check that the metal parts of the tool and stand
are clean so that the station can detect the tool status.
- Periodically check all cables and tubes.
- Replace any defective or damaged parts.
- Only use original JBC spare parts.
- Repairs should only be performed by a
JBC authorized technical service.
Clean
periodically
Operating Modes
1. From the Tool Settings Menu, select the mode to activate the tool depending on the task.
2. The tool stops blowing when pressing the start/stop button.
If the stand is connected to the station and for safety it will also stop when returned to the stand.
Tool button
Pedal*
Press the start/stop button to blow hot air. Press the Pedal to blow hot air and release
to stop.
*The P-005 Pedal is not supplied with this
station.
Press
Press
www.jbctools.com
3
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
- Weight: 1.24 kg (2.73 lb)
- Dimensions: 80 x 110 x 150 mm (3.15 x 4.33 x 5.91 in)
Complies with CE standards
ESD protected housing “skin effect”
Specifications
0016868 - 0417
www.jbctools.com
Loading...