jbc FAE1-1A, FAE1-2A Instruction Manual
Fume Extractor
Ref. FAE1-A
INSTRUCTION MANUAL
www.jbctools.com
INSTRUCTION MANUAL
Fume Extractor
Ref. FAE1-A
www.jbctools.com
H13 Filter & Carbon Filter
& M5 Pre-filter ........................................... 1 unit
Ref. FA E1-10 0
Already assembled
Packing List
The following items should be included:
Fume Extractor ......................................... 1 unit
Ref. FAE1-1A (100V / 120V)
FAE1-2A (230V)
Manual ........................................................... 1 unit
Ref. 0022744
Power cord ................................................ 1 unit
Ref. 0009417 (100V / 120V)
0009401 (230V)
RJ12 direct cable .................................... 2 units
Ref. 0 019751
Unseal the filter
before the first use
2
Features
Aspiration tubes for workbench
and tool stands extraction
Filter saturation indicator:
Quick release
levers for filter
change
Power socket
Main switch
Process screen
Green: Filter OK
Yellow: - ≤ 20% carbon lifetime
- ≥ 80% Saturation
Red: - End of carbon lifetime
- Filter saturated
USB-B connection
RJ45 connection (for future peripherals)
RJ12 robot connection
Pedal connection
RJ12 station
connections
(to station
robot port)
www.jbctools.com
3
Visit www.jbctools.com
for further details.
Fume Extractor
Ref. FAE1-1A (100V / 120V)
FAE1-2A (230V)
Accessory for
stand aspiration
(up to 4 stands)
Ref. FAE040
To be assembled on
your workbench with
the included clamp
Ref. FAE030
To be assembled directly
on your workbench (hole
drilling required)
Stand
Aspiration Duct
Ref. FAE050
For modular stands
(From SD versions
onwards)
Ref. FAE060
For compact stations
(From B versions
onwards)
Flexible arm Ø50
Ref. FAE070
Lenght: 1 m (39.37 in)
To be assembled on
your workbench with
the included clamp
Ref. FAE020
To be assembled directly
on your workbench
(hole drilling required)
Flexible Hoses Ø50
Ref. FAE010
Lenght: 1,5 m
(59.05 in)
Connect the Fume Extractor
indifferently to the flexible
arm or to the accessory for
stand aspiration
Attention
Avoid awkward positions
in order to minimize
pressure losses
Basic Working System
4
Flow
H M L
Saturation 0%
Filter
Carbon life 100%
WORK
OFF
STAND
OFF
STOP # 4
Cover opened or badly
closed. Double check the
cover.
WORK
ON
STAND
OFF
Flow
Saturation 20%
100%
Filter
Carbon life 90%
Flow
H M L
Saturation 20%
Filter
Carbon life 90%
WORK
ON
STAND
OFF
Turn on the fume extractor
Once the fume extractor is turned on, the display shows the following screen and the filter saturation
indicator is green.
If the display shows STOP#4, power off the fume extractor, remove the cover, place it back and
secure it using the quick release levers.
Menu Interface
Main Screen
Aspiration
status
Stand aspiration
flow status
Work aspiration
flow status
High, medium and low
preset aspiration programs
Custom aspiration program
Change the aspiration Custom level
and the aspiration Preset program.
www.jbctools.com
5
4 Filter set
5 Counters
6 Program version
Main menu
Exit
1 Reset
2
Unit
3
Port
Unit
1 Continuous mode OFF
2
Beep ON
3 PIN OFF
4 Change PIN
Filter set
1 Carbon life 90%
2 Saturation 20%
3 Reset carbon
Back
Counters
1 Total
2 Partial
Back
Back
Port
1 Program Ctm - 100%
2
Delay to stop
3
Pedal
Back
Total Counters
1 Plugged hrs 100
2 Idle hrs 10
3 Work area hrs 70
4 Stand hrs 20
5 Work area cys 10
Back
Partial Counters
1 Plugged hrs 100
2 Idle hrs 10
3 Work area hrs 70
4 Stand hrs 20
5 Work area cys 10
6 Reset
Back
Menu Interface
Main menu parameters
Original PIN: 0105
6
Loading...