jbc CS2R245-A, CS2R470-A User Manual

Cartridge Stand for Automation

Ref. CS2R245-A / CS2R470-A

www.jbctools.com

2

Cartridge Stand for Automation .......... 1 unit

Ref. CS2R245-A
CS2R470 -A

Screw .............................. 1 unit

DIN 912 M6x20

Ref. 0842925

Washer ............................ 1 unit

DIN 125 Ø6.4 mm

Ref. 0842925

Manual .............................. 1 unit

Ref. 0021526

Packing List

The following items should be included:

Ref. CS2R245-A /CS2R470-A

Cartridge Stand for Automation

www.jbctools.com

3

Features

Mounting Hole

Gripper Actuators

Gripper Actuator

Fluid Air

Applicable tubing Ø4mm

Operating pressure 0,15 to 0,7 MPa

A Tube connection to fix cartridges

B Tube connection to release cartridges

A

A

B

B

The CS2R is designed to be used in
automatic soldering processes. Thanks to
the Gripper Actuators, it allows to hold the
cartridges while they are not in use.

It can be used in combination with
Automatic Soldering Irons (TRA) and the
new Cartridges for Automation (R245 and

R470 ranges).

Assembly

The CS2R comes with a mouting hole, that serves to fixing it at the robot work place area. Use
DIN912 M6 screws to attach it.

The Gripper Actuator must be connected to an air-circuit by using the tube connections A and B.

www.jbctools.com