JBC CP-1F, CP-2F, CP-9F User guide [ml]

www.jbctools.com

INSTRUCTION MANUAL

Compact

Micro Tweezers Station

Ref. CP-QF

Packing List

The following items are included:

CP Control Unit ......................................... 1 unit

Ref. CP-1F (120V)
CP-2F (230V)
CP-9F (10 0V )

Power Cord ........................................... 1 unit

Ref. 0023715 (120V)
0023714 (230V)
0024092 (100V)

Sponge .................................................. 1 unit

Ref. S0354

Adjustable Micro Tweezers ................... 1 unit

Ref. AM120-A

Brass Wool .................................................... 1 unit

Ref. C L6 210

Manual ................................................... 1 unit

Ref. 0026108

2

Features and Connections

Adjustable Stand:
Intelligent Heat Management

Cartridge Storage

Quick Tip Changer

Process
Screen

www.jbctools.com

Cable Collector

Tip Cleaner Brass Wool
with Antisplash Membrane
and Wiper

Main Switch

Power Socket

Fuse

Adjustable Micro Tweezers

Ref. AM120-A

Equipotential Connection

Earth Fuse

USB-B Connector

Fume Extractor Connector

3

OK

Adjustable Stand Cable Collector (Ref. CC1001)

Adjust the tool stand to suit
your work position.

Place the cable on the collector so that the working area is free
of cable.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref . 0017576

When using the brass wool. it prevents
splashing of solder particles.

Brass Wool

Ref. C L6 210

Very effective cleaning
method. Leaves a
small layer of solder
on the tip preventing
oxidation between
cleaning and rewetting.

Antisplash Membrane

Ref. 0 0175 74

Prevents splashing and
keeps the work area clean.

If the tip is ver y dirty,
JBC recommends first
cleaning it with the wiper
to remove excess solder.

Wiper

Ref. CL0160

A temperature resistant receptacle for removing
excess solder by gently tapping or wiping.

4

OK

Removing the Splashguard

1. Unlock the splashguard. 2. Lift off.

Lock

More cleaning options (not supplied):

www.jbctools.com

Inox Wool

Ref. CL6205
Stronger cleaning
method than brass
wool.

Wiper

Ref. CL0160

Tapping:

Tap gently to remove excess
solder.

Wiping:

Use the slots to remove
remaining particles.

Metal Brush

Ref. CL6220
When used carefully,
it provides a more
thorough cleaning.

Sponge

Ref. S0354

The softest cleaning method.
Keep the sponge damp with
distilled water when working
to avoid tip wear.

5

Changing Cartridges

2. Positioning 1. Removing

Place the cartridges in the extractor and pull
to remove the cartride.

Place the tweezers on top of the new cartridge
and press down slightly.

3. Inserting

Use the holes for fixing the cartridges*.

*Important

It is essential to insert the cartridges as far as the mark for a proper connection.

Mark

6