jbc CDE-BA Series, CDE-1BA, CDE-9BA, CDE-2BA Instruction Manual

Compact Soldering Station

Ref. CDE-BA

INSTRUCTION MANUAL

www.jbctools.com

Packing List

The following items should be included:

Power Cord .................................................... 1 unit

Ref. 0009417 (100V/120V)
0009401 (230V)

Manual ............................... 1 unit

Ref. 0020588

CDE Control Unit .......................................... 1 unit

Ref. CDE-1BA (120V)
CDE-2BA (230V)
CDE-9BA (100V)

Brass Wool ....................... 1 unit

Ref. CL6210

Cartridges ................................................... 2 units

Ref. C245903 (x1)
C24 5 741 (x1)

Sponge ............................. 1 unit

Ref. S0354

General Purpose Handle ...................... 1 unit

Ref. T245-A

Compact Soldering Station

Ref. CDE-BA

www.jbctools.com

2

Earthing fuse

Aux connector

Equipotential connection

USB-B connector

PeripheralsPower Socket

Input Fuse

Main switch

Pedal connector

Features

General Purpose

Handle

Ref. T245-A

Cable collector

Quick Tip Changer

Cartridge storage

Tip Cleaner brass wool
with antisplash membrane

Process Screen

Adjustable Stand:
Intelligent Heat Management

www.jbctools.com

3

Brass Wool

Ref. CL6210
Very effective
cleaning method.
Leaves a small layer
of solder on the tip
preventing oxidation
between cleaning
and rewetting.

Adjustable stand Cable collector (Ref. CC3702)

Adjust the tool stand to suit
your work position.

Place the cable on the collector so that the working area is free
of cable.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0017576
It prevents splashing of solder particles
when using the brass wool.

Antisplash Membrane

Ref. 00175 74
Prevents splashing to maintain the work
area clean.

Wiper Ref. CL0160
A temperature resistant receptacle for removing
excess solder by gently tapping or wiping.

If the tip is very dirty,
JBC recommends first
cleaning it with the wiper
to remove excess solder.

4

Lock

Removing the Splashguard

1. Unlock the splashguard.

2. Remove it.

More cleaning options (not supplied):

Inox Wool

Ref. CL6205
Provides a superior
cleaning of the tip.

Metal Brush

Ref. CL6220
When used carefully,
it provides a more
thorough cleaning.

Sponge

Ref. S0354

Tapping:

Tap gently to remove excess
solder.

Wiping:

Use the slots to remove
remaining particles.

Wiper

Ref. CL0160

The least harmful cleaning
method. Keep the sponge
damp with distilled water when
working to avoid tip wear.

www.jbctools.com

5

ø 1

ø 3,5

A

B

B

C

A

Mark

Changing the Grips

Easily replace the Grips for T245-A and T245-C using the slip-on tabs (Ref. 0016057)

1. Inserting tabs

2. Inserting handle

3. Removing tabs

Quick Tip Changer

Put the slide-on tabs into the
new grip.

Push the grip with the tabs
onto the handle.

To remove the tabs, hold the
grip and pull. Use a pliers if
necessary.

Save time and change cartridges safely without switching the station off.

1. Removing 2. Inserting

3. Fixing

Place the handpiece in the
extractor and pull to remove
the cartridge.

Place the handpiece on top
of the new cartridge and
press down slightly.

Use the holes for fixing the
cartridge* as follows:

A. For straight C210.
B. For curved C210.
C. For C245.

tabs

new grip

Round Chisel Round-bent Bevel Special models

Compatible cartridges

The CD-B stations work with
C245 cartridges.
Find the model that best
suits your soldering needs in
www.jbctools.com

*Important

It is essential to insert the
cartridges as far as the mark
for a proper connection.

6