Jazz HDV180 Instruction Manual

0

1

Table of Contents

Preface…………….……………………………………………………………………….3
FCC STATEMENT………………………………………………………….. …………….4
SD Memory card basic information………………………………………………………..5
System Requirements …………………………………………………….. ……………7
Features………………………………………………………….. ……………. …………7
Accessories………………………………………………………………………………8
Know Your Video Recorder .…………………………………………………………..9
Buttons and Function Indicators…………………………………………………………12
Basic Operation………………………………………………………………………..13
Battery Installation……………………………………………………………………….13
SD/SDHC Memory Card Installation……………………………………………………14
Turn the video recorder ON………………………………………………………………..15
Select the MODE…………………………………………………………………………15
Turning video recorder OFF…………………………...…………………………………..17
MENU Setup / Internal Setting…………………………………………………………17
Setting Date and Time…………………………………………………………………..18
Computer Connection …………………………………………………………………19
Advanced Operation……………………………………………………………………..20
Video Recording Mode…………………………………………………………………….20
Camera Mode ………………………………………………………………………..24
Audio Recording Mode…………………………………………………………………..29

2

Playback Mode…………………………………………………………………………30
Computer Connection for Photo/Video Download………………………………………40
PC Camera Function…………………………………………………………………..41
Operating PC Camera …………………………………………………………………43
MediaImpression Installation …………………………………………………………45
Software Installation……………………………………………………………………..45
Using MediaImpression………………………………………………………………….46
Specifications………………………………………………………………………………50

Troubleshooting……………………………........................................................................52

3

Preface

Thank you for purchasing this digital video recorder.
Please read this manual carefully and keep in a safe place for further reference.
Note: The product specifications and these operating instructions are printed based on latest
available information and are subject to change without prior notice.
The specifications of the particular video recorder you have purchased will apply even if
these vary from this printed data.

Note: Please format newly purchased SD memory card or one previously used in

another video recorder prior to using in this video recorder. Please back up all the
important data in media card before formatting.

4

FCC statement

This device complies with part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

NNOOTTEE:: TThhiiss eeqquuiippmmeenntt hhaass bbeeeenn tteesstteedd aanndd ffoouunndd ttoo ccoommppllyy wwiitthh tthhee lliimmiittss ffoorr aa CCllaassss BB
ddiiggiittaall ddeevviiccee,, ppuurrssuuaanntt ttoo PPaarrtt 1155 ooff tthhee FFCCCC RRuulleess.. TThheessee lliimmiittss aarree ddeessiiggnneedd ttoo pprroovviiddee
rreeaassoonnaabbllee pprrootteeccttiioonn aaggaaiinnsstt hhaarrmmffuull iinntteerrffeerreennccee iinn aa rreessiiddeennttiiaall iinnssttaallllaattiioonn.. TThhiiss
eeqquuiippmmeenntt ggeenneerraatteess,, uusseess,, aanndd ccaann rraaddiiaattee rraaddiioo ffrreeqquueennccyy eenneerrggyy aanndd,, iiff nnoott iinnssttaalllleedd aanndd
uusseedd iinn aaccccoorrddaannccee wwiitthh tthhee iinnssttrruuccttiioonnss,, mmaayy ccaauussee hhaarrmmffuull iinntteerrffeerreennccee ttoo rraaddiioo
ccoommmmuunniiccaattiioonnss.. HHoowweevveerr,, tthheerree iiss nnoo gguuaarraanntteeee tthhaatt iinntteerrffeerreennccee wwiillll nnoott ooccccuurr iinn aa
ppaarrttiiccuullaarr iinnssttaallllaattiioonn.. IIff tthhiiss eeqquuiippmmeenntt ddooeess ccaauussee hhaarrmmffuull iinntteerrffeerreennccee ttoo rraaddiioo oorr
tteelleevviissiioonn rreecceeppttiioonn,, wwhhiicchh ccaann bbee ddeetteerrmmiinneedd bbyy ttuurrnniinngg tthhee eeqquuiippmmeenntt ooffff aanndd oonn,, tthhee uusseerr
iiss eennccoouurraaggeedd ttoo ttrryy ttoo ccoorrrreecctt tthhee iinntteerrffeerreennccee bbyy oonnee oorr mmoorree ooff tthhee ffoolllloowwiinngg mmeeaassuurreess::

-- RReeoorriieenntt oorr rreellooccaattee tthhee rreecceeiivviinngg aanntteennnnaa..

-- IInnccrreeaassee tthhee sseeppaarraattiioonn bbeettwweeeenn tthhee eeqquuiippmmeenntt aanndd rreecceeiivveerr

-- CCoonnnneecctt tthhee eeqquuiippmmeenntt iinnttoo aann oouuttlleett oonn aa cciirrccuuiitt ddiiffffeerreenntt ffrroomm tthhaatt ttoo wwhhiicchh tthhee

rreecceeiivveerr iiss ccoonnnneecctteedd..

-- CCoonnssuulltt tthhee ddeeaalleerr oorr aann eexxppeerriieenncceedd rraaddiioo TTVV tteecchhnniicciiaann ffoorr hheellpp..

PPeerrttiinneenntt tteessttiinngg ddooccuummeennttaattiioonn iiss aavvaaiillaabbllee ffoorr vveerriiffiiccaattiioonn..

5

SD Memory card basic information

- Your video recorder must have SD/SDHC Memory Card inserted to store recorded

Video, take Photos and Audio records.
SD Memory Card is not supplied and should be purchased separately.
SD/SDHC memory card with capacity up to 8GB may be used in your recorder.

SD Memory Card

• Please note that the SD card has tiny LOCK slider on the side for write

protection of the SD memory card that helps avoid inadvertent deletion of image
files. Set this slider to “un-LOCK” position for storing still images or
recording video.

• Recorder will accept SD/SDHC Memory cards with max capacity up to 8GB

• SD Memory card is simple and convenient but delicate electronic device; do not

open, bend and overheat the card. Keep the card away from strong magnetic
field and dirty / harsh environment.

Contact pins / connectors

Write protection LOCK switch

6

• If your SD card has been used previously with other devices / cameras or is

brand new – the card may require to be formatted – please ensure you save all
valuable records before formatting.

Inserting the SD Card

1. Open the Battery Cover and slide in the card; aligning the card with orientation

mark on the video recorder and push card all way down
Do not force the card when inserting to avoid damaging – check position and
re-insert carefully.

2. To remove the card, please press gently and release the card; recorder will eject

the SD card automatically

Note: Insert and remove the card only when the recorder is turned OFF.
Inserting / removing the card may otherwise damage or erase stored data.

Maintenance of the video recorder

Keep and store your recorder away from humid, dust and harmful chemical environment.
Do not store or operate the recorder under the extremely hot or cold condition.
Keep recorder clean and take care to avoid scratching or damaging of the housing and the
lens. Blow dust away and use soft cloth if the lens becomes dirty or contaminated.
Do not use an organic solvent to clean lens.
Remove batteries if you are not planning to use the recorder for an extended time.

7

System Requirements

You may use the computer to download images and video from your recorder, edit images,
email or post records over the Internet.
Make sure that you computer complies with (below) minimum requirements:

System Requirements
Oper

ating System

Windows XP,VISTA,7
CPU Intel PIV 1GB or above CPU
Memory 512MB or higher

Audio & Video

Card

DirectX8 Audio & Video Card

CD-ROM Drive Min 16x
Hard Drive space 1GB or higher available memory space
USB port Standard USB1.1 or USB2.0 port

Features

The recorder incorporates the following features and functions:

l Digital Video Recorder (supports 1280×720 HD video recording)
l Digital Camera (12 Mega Pixels and other options)
l Mass Storage (Portable Disc)
l 8x Digital Zoom

8

Accessories

The following accessories are packed together with the video recorder:

USB Cable TV Cable Installation CD Manual & QSG

9

Know Your Video Recorder

Screen

Recording Button

Busy Indicator

Mode Knob

Power Button

USB Port

TV Connector

Wrist Strap

Speaker

10

Zooming Button

Shutter

Button

Menu

Button

Up

Button

Left Button

Right

Button

Down Button

OK Button

P

lay

back

Button

Delete

LED

Light

Button

11

Lens

LED

Support Light

Microphone

Self

-

Timer

Indicator

Battery Cover

Tripod Socket

12

Buttons and Function Indicators

Buttons/Indicator Function

Power Button Press to turn the video recorder ON and OFF
Recording Button Press to Start / Stop Video / Audio recording
Shutter Button Press to take Still photo

Zooming Button

Tilt Left or Right to “zoom” the scene or enlarge/shrink
photos in Playback Mode

Menu Button Press to OPEN / CLOSE the MENU selection
Mode Knob

Turn to select the desired MODE: Video Recording,
Camera (taking Still Photos), Audio Recording

Playback Button Press to Enter / Quit the Playback Mode

Up Button

Selects MENU option, moves photos upwards (when the
photo is enlarged and set at Pan mode) and changes
resolution setting in Video Recording Mode. In Photo
Playback Mode, pressing this Button will activate direct
printing function of the displayed photo. After connecting
the recorder via USB cable to the printer that
supports PictBridge Standard (printer with
icon attached), press OK Button to start printing.

Down Button Selects MENU option and moves photos downwards

13

(when the photo is enlarged and set at Pan mode).

Left Button

Selects files and MENU, moves photos to the left (when
the photo is enlarged and set at Pan mode) and presses to
turn on / off icons and indicators displayed on the screen /
turn off the screen.

Right Button

Selects files and MENU, moves photos to the right (when
the photo is enlarged and set at Pan mode) and switches to
the Self-Timer Mode or vice versa

LED Flash Button

Press to activate / turn OFF the LED Flash Support light

OK Button

Press to confirm MENU / option changes and start
playing video or audio file.

Delete Button

Press to delete the selected file in playback mode or the
last record in Video Recording/ Still Photo Taking or

Audio Recording Mode.
Busy Indicator Indicates Recording / Processing Status
Self-Timer
Indicator

Flickers during Self-Timer countdown process

Basic Operation

1. Battery Installation

The video recorder uses 4 alkaline batteries AAA size as power supply.
Slide and open the Battery Cover and insert batteries correctly following the polarity
markings on the Battery Cover, then close the cover.

14

Before changing installed but exhausted batteries, first turn OFF the recorder.

2. SD/SDHC Memory Card Installation

Open the Battery Cover and insert the SD/SDHC memory card into the Card Slot.
Follow the printed mark indicating SD Card position with the metal connector facing
inwards the slot.

To remove / replace the SD/MMC memory card press the card again; the card will pop up
and you may remove the card from the recorder.

───────────────────────────────────────────────────────────

15

Notes：

l Turn OFF the video recorder before inserting / changing the memory card;

l Insert the memory card correctly. Do not use force; otherwise you could

damage the card or the recorder. If the card cannot be inserted easily please check
card alignment and position; then repeat installation.

l Please format memory card that is used for the first time or that has been

previously used in other recorders.

────────────────────────────────────────────────────

3. Turn the video recorder ON

- Open the LCD Screen with display facing you.

- Press the Power Button to turn ON the recorder.

4. Select the MODE

Note current position of the MODE Knob; turn the knob to set desired mode:

• Video Recording

• Camera (Still Photo Taking)

• Audio Recording.

Note location of icons corresponding to the pointer on the Knob.
(Please press the PLAYBACK Button if you wish to enter the playback Mode)

Video Recording

Select the Video Recording Mode.