Jaypro Sports FS-101 User Manual

"When The Game Is On The Line"

Model FS‐101

10’ x 10’ Collegiate Fielder’s Screen

www:Jaypro.com

INTRODUCTION

These instructions outline the assembly and use of the Collegiate Fielder’s Screen Model FS‐101. If you

need additional information or support in the assembly and use of the Collegiate Screen you can reach

the Jaypro Sports customer support team, Monday through Friday, 8:00 AM to 5:00 PM Eastern time at

800‐243‐0533.

Replacement nets are available through your dealer or by calling Jaypro Sports.

SAFETY

All netting deteriorates through use and exposure to the elements. For safe operation and continued

high performance from this equipment, inspection and maintenance must be performed before each

use. Inspect the net for broken mesh, tears, or other signs of weakness. Questionable nets should be

immediately removed from service and replaced.

Use of this equipment other than intended, may be hazardous. Alteration or modification of equipment

may be hazardous. For repair or replacement, please call your dealer or Jaypro Sports.

EQUIPMENT AND MATERIALS

You will need the following tools to put the Collegiate Screen together.

Allen Wrenches

Wrench Set

Rubber Mallet

Optional ‐Loctite Thread Lock

BEFORE YOU START

Check to confirm that you’re Collegiate Fielder’s Screen has shipped with all hardware. If any hardware

or components are missing, contact the Jaypro Customer Support Team.

ITEM QTY DESCRIPTION ITEM QTY DESCRIPTION

1 1 LEG BASE 9 2 TUBE CAP
2 1 WHEEL BASE 10 6 M8 SCREW
3 1 BASE PIPE 11 6 M8 NUT
4 2 UPRIGHT 12 2 M12 NUT
5 1 TOP CROSSBAR 13 2 M12 WASHER
6 2 WHEEL BRACKET 14 2 M12 x 65mm SCREW
7 2 WHEEL 15 2 SELF TAPPING SCREW
8 1 NET