Jaycar Electronics QC3624 Installation And Operating Instructions Manual

Wireless Video Door Phone

Installation and Operating Instructions

Model: QC3624

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT

AND KEEP THIS MANUAL FOR FUTURE REFERENCE.

1

CONTENTS

INTRODUCTION .............................................................................................. 2

IMPORTANT SAFETY PRECAUTIONS .....................................................................2

KNOWING YOUR DEVICES ............................................................................3

DOOR UNIT ..............................................................................................................3

ANSWERING UNIT ...................................................................................................

..................................................................................

4

KNOWING THE SCREEN ICONS .............................................................................5

MOUNTING THE DOOR UNIT 7

KNOWING THE MAIN MENU ......................................................................... 10

ADVANCED SETTINGS ................................................................................. 11

CAMERA SETUP .................................................................................................... 11

RECORDER SETUP ...............................................................................................12

SETUP MASKING AREA ...................................................................................14

EVENT LIST ........................................................................................................... 15

DATE ................................................................................................................15

TIME .................................................................................................................17

FILE ..................................................................................................................19

SYSTEM SETUP ....................................................................................................20

ALARM BUZZER ....................................................................................................22

PAN TILT ZOOM .....................................................................................................

..................................................................................

...........................................................................

23

SCAN ACTIVATED CAMERAS................................................................................24

MEMORY CARD OVERWRITE ...............................................................................25

PC PLAYBACK SOFTWARE .......................................................................... 26

SEC24 MEDIA PLAYER INTRODUTION .........................................................................26

SOFTWARE INSTALLATION 27
PLAYBACK RECORDED FILE(S) 29

ADDING ADDITIONAL CCTV CAMERA .................................................................31

PRODUCT SPECIFICATION .......................................................................... 32

STORAGE MEDIA MANAGEMENT ......................................................................... 32

WHAT YOU GET

•

Digital Wireless 7" Touch LCD Answering Receiver X1

•

Digital Wireless Door Unit X1

•

12V/1A Power Adaptor for the Door Unit X1

•

5V/1A Power Adaptor for the Answering Receiver X1

•

DC Power Cable X1

•

Unlock Connection Cable X2

•

Water Resistant Plug X2

•

Mounting Bracket X1

•

Mounting Pack X1

•

Anti-Thief Screwdriver X1

•

PC Player Software CD X1

2

INTRODUCTION

I

IMPORTANT SAFETY PRECAUTIONS

Damages caused by non-compliance with this operating manual will void the warranty! We will

not assume any liability for damages to items or persons caused by improper handling or non-

compliance with the safety notices! Any warranty claim will be null and void in such cases.

1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided.

2. Avoid all contact with water, and dry hands before using.

3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.

4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may

damage the camera or cause camera temporary malfunction.

5. Use the devices with care. Avoid pressing hard on the camera body.

6. For your own safety, avoid using the camera or power off the camera when there is a storm or

lightning.

7. Remove the power adapter during long periods between usages.

8. Use only the accessories and power adapters supplied by the manufacturer.

9. To meet the regulations pertaining to parental responsibility, keep the devices out of the reach

of infants.

10. Check power cables, do not get crushed or damaged by sharp edges whenever the devices are

in operation.

PLEASE READ BEFORE YOU START

Always use discretion when installing CCTV equipment, especially when there is perceived

policy. Enquire relevant local regulations applicable to the lawful installation of video recording/

surveillance. Third party consent may be required.

WIRELESS DEVICES OPERATING RANGE

Ensure the signal reception viewed from the wireless camera(s) is the best possible reception

between the camera(s) and the Wi-Fi router. If necessary, reduce the distance between the

camera(s) and the Wi-Fi router to improve overall system performance. Wireless Color Camera

Recordable CCTV Kit operating on a secure digital 2.4GHz frequency which could greatly

reduce interference from product such as wireless routers, cordless phones or microwave

ovens.

CAUTION

•

This product is designed with built-in high sensitivity microphone. Please keep the door unit away from

the answering unit at least 3 to 5 meters, otherwise continuously howling will occur. Please volume

down if short distance use is needed.

•

Do not insert or remove SD Card when the system is in operation. This may cause system malfunction.

e.

3

KNOWING YOUR DEVICES

DOOR UNIT

Item Function

1 Antenna

2 Speaker

3IR LED

4EDS

5 Call Button

6 Microphone

7 Pairing Key

8 Battery Compartment

Item Function

9 Dry Contact Output A

10 Dry Contact Input

(for DC Power Cable)

11 Dry Contact Output B

12 Power Adaptor

13 DC Power Cable

14 Unlock Connection Cable

Note:

1. The door unit can operate in Battery mode or DC mode. In Battery mode, it requires 6 x

AA batteries to operate (which are not included).

2. Low battery may cause system malfunction. Please replace battery in time.

4

ANSWERING UNIT

Item Function

1 Wirelless Signal Indicator

2 Power Indicator

3 Microphone

4Antenna

5 Power Button

6Speaker

Item Function

7 Flip-out Stand

8 Micro SD Slot

9

10

Reset

11

AV Out Jack

Adaptor Plug

Note:

When using A/V cable connecting the receiver to TV, the display on receiver will not be
available and answering visitor function will also be turned off until disconnecting A/V cable
from the receiver.

5

KNOWING THE SCREEN ICONS

Item Function

1 Channel Number

2 Active Voice Channel

3 Wireless Signal Strength

4 Camera Battery Capacity

5 Channel Status

6 Recording Countdown

Indicator

7 Receiver Battery Status

8 System Time Information

9 Record Status

6

System Tray Icon

Icon image

Name

Function

System Tray

System Tray-Hide & display tray icon

Channel Display Press to switch display channel

Two Way Audio Press to start/stop communication.

Door Control Press to open the door (Dry Contact B)

Gate Control Press to open the gate (Dry Contact A)

Volume Press to adjust receiver volume

Record

Press to start/stop recording

Setup Press to enter setup menu

Note:

1. Record function cannot be stopped unless the

countdown OSD completes

3. Users cannot switch channel to another camera

when recording function is active.

CAUTION

．

By default, the monitor screen will be ALWAYS ON. If you want to save power

consumption, please setup the idle mode in 'System Setup' sub-menu. ('System Setup' >

'Power Saving' > 5Minutes/10Minutes/ALWAYS ON).

2. Receiver starts to record for 1 minute when a visitor

presses the doorbell. If users answer the visitor, one

more minute will be recorded.

7

MOUNTING THE DOOR UNIT

Installation via Battery Power Mode

1. First insert six AA batteries (not included) according to the
polarity (+/-) indicator on the door unit.

2. Optional: The door unit has been paired to the receiver by

factory default. If you need to pair the door unit to the system

again, please go to "Advanced Settings / Camera Setup" for

more details.

3. Door unit is now ready for use.

Step1

Use the sunshield as a template

to drill 4 suitable holes and attach

the sunshield to the wall with the

screws and wall plugs (supplied).

Step2

Install the back panel (with batteries

inserted) to the door unit with the

correct screws (supplied).

Step3

Position the door unit into

the sunshield and finish

the in

stallation with the

two anti-theft screws

(supplied).

BEFORE YOU START

•

•

•

Before installing the door unit, please first check to make sure the location is suitable for the
installation.

To avoid possible damages, the installation location should free from excessive moisture, dust
and vibration. For optimum transmission performance, avoid installing the door unit directly or
near metallic building materials. Excessive numbers of network access points, such as Wi-Fi
routers will also reduce the wireless transmission performance.

There are two ways to supply power to the door unit, either via batteries or DC power. The battery
power mode offers pure convenience, especially when no power source near by the installation
location. If door unlock function (3rd party door lock with own power supply required) is required,
please install the door unit via DC power mode only. Please note that both sets of dry contacts for
the door locks (not supplied) do not supply any power.

Put in 6x “AA” 1.5V batteries

Pairing

Key

8

INSTALLATION VIA DC POWER MODE

1. Remove the back cover of door unit.

2. (Optional) The door unit supports two types of third-party locks, 4-wire type and 2-wire type (please
note the door unit do not supply the power to the 3rd party locks). If you want to control the door

lock via the receiver, please follow the wire connection method in the figure above.

r wire to the terminal block with

"DC+" symbol. Connect the Black power wire to the terminal block with "DC-" symbol. Then plug

the power adapter to the DC IN jack and wall outlet.

4. Optional: The door unit has been paired to the receiver by factory default. If you need to pair the

door unit to the system again, please go to "Advanced Settings / Camera Setup" for more details.

5. Install the door unit in proper location.

Dry Contact A - Related icon

Dry Contact B - Related icon

A. 4-Wire Type Connection Diagram

Power

Power

Input

B. 2-Wire Type Connection Diagram

Adaptor connect to DC Jack

Step1

Use the sunshield as a template

to drill 4 suitable holes and attach

the sunshield to the wall with the

screws and wall plugs (supplied).

Step2

Install the back panel to the door

unit with the correct screws

(supplied).

Step3

Position the door unit into

the sunshield and finish the

installation with the two

anti-theft screws (supplied).

9

MOUNTING THE THE ANSWERING UNIT

1. Connect the power adapter to the

DCIN jack and the nearest wall

outlet.

2. Press [Power Button] for two

seconds to turn on the receiver.

Note:

When using A/V cable connecting the receiver to TV, the display on receiver will not be
available and answering visitor function will also be turned off until disconnecting A/V cable
from the receiver.

10

KNOWING THE MAIN MENU

Item

Function

1 CAMERA SETUP

2 RECORDER SETUP

3 EVENT LIST

4 SYSTEM SETUP

5 ALARM BUZZER

6 PAN TILT ZOOM

7 SCAN ACTIVATED CAMERAS

8 MEMORY CARD OVERWRITE

9 RETURN TO LIVE VIEW

In this section you can pair and adjust the brightness setting for
door unit and optional CCTV cameras (for more information on
where to purchase the additional CCTV camera please contact
vendor).

Please note, channel 1 is dedicated to door unit only. Additional
CCTV cameras are to be paired to channel 2, 3 and 4.

By default the video of the door unit is in full screen mode and
with additional CCTV cameras added to the system the receiver
display will automatically be in quad mode.

For any reason you need to re-pair the door unit to the receiver,
please first tap on channel 1 and select pair. You will have 30
seconds to press the pair-key, which is located in the back of the
door unit (see "mounting the door unit" section for more detail).

"Pairing Fail" will be displyed if pair-key not pressed within the 30
seconds period (please make sure the door unit is correctly
powered), tap on pair icon to re-initiate the pairing process again.

11

ADVANCED SETTINGS

CAMERA SETUP

Item

Function

1

CH1 (Doorphone 1)

- Pair

- Brightness

2-4

CH 2, CH3, CH4

(CCTV Camera)

- Pair

- Brightness

- Camera On/Off

5 Return to Setup Menu

12

RECORDER SETUP

Item Function

1

Record Schedule (24 hours)

- M = Motion

- S = Schedule

- X = Manual

2

Motion Detection Sensitivity

- LV 1 / LV 2 / LV 3

3

Memory Card Erase

- Tap to start for matting

4

Setup Masking Area

- 8 x 6 Grid

5 Return to Setup Menu

1. Each motion recording time is 2 minutes.

3.

Users can stop manual record by themselves. Recording will be stopped after 10 minutes if

users do not stop it.

13

14

SETUP MASKING AREA

1. Save & Exit

2. Block grid

3. Unblock grid

15

EVENT LIST

1. Previous Page

2. Next Page

3. Return

4. Folder (Date)

DATE

16

Press folder and hold on 2 seconds

5. Delete

6. Cancel

Date Folder

17

TIME

1. Return

2. Folder (Time)

3. Delete

4. Cancel

Press folder and hold on 2 seconds

18

File

5. Previous Page

6. Next Page

7. Return

8. File

9. Delete

10. Cancel

19

FILE

1. Tray Icon Expand/Hide

2. Backward

3. Pause/Play

4. Forward

5. Display Channel

6. Stop Playback and Back to Folder

7. Time Stamp Information

8. Channel Status

9. Play Status

20

SYSTEM SETUP

Item Description

1

Date and Time

- Adjust Year/Month/Date/Hour/

Minute

2

TV Output

- NTSC/PAL

3

Power Saving

- Screen off After 5 Minutes Idle

- Screen off After 10 Minutes Idle

- Screen Always On

4

Multi Channels Idle Display

- QUAD Display

- Doorphone Display

- 10 Sec. Scan with Doorphone Display

- 10 Sec. Scan without Doorphone Display

5

Default (Language Setting)

- English (Default)

- Français

- Deutsch

6 Return to Setup Menu

21

TV Output Tip:

Users should choose right TV output format to match NTSC or PAL TV. Receiver output will be

invisible when TV output port is connected.

Power Saving Tip:

Set receiver panel turn off time to save the power.

Multi Channels Idle Display Tip:

Set sequential switch time interval of all active channels.

Default Tip:

Default setting will be executed when language setting is changed.

22

ALARM BUZZER

Alarm Buzzer setting of receiver.

23

PAN TILT ZOOM

1. Channel Information

2. Digital Zoom Information (2X)

3. Zoom Mode Status

4. Wireless Signal Strength

5. Receiver Battery Status

6. System Time Information

Note:

1. Red triangle mark is used to adjust the visible range.

2. Black return mark is used to exit the mode.

24

SCAN ACTIVATED CAMERAS

Enter sequential switch mode of all active channels.

System Tray Icon

1. Channel Information

2. Scan Activated

Cameras Mode

3. Wireless Signal

Strength

4. Receiver Battery

Status

5. System Time

Information

6. System Tray Icon

7.Exit Scan Mode and

Back to Setup Menu

25

MEMORY CARD OVERWRITE

26

PC PLAYBACK SOFTWARE

The Sec24 Media Player is specially designed for security playback the unique video format generated
from the system after detecting unusual movements from the site where the camera of the system is
installed.

Sec24 MEDIA PLAYER INTRODUCTION

1. Channel 1 Playback Screen 7. Pause

2. Channel 2 Playback Screen 8. Stop

3. Channel 3 Playback Screen 9. Fast Rewind

4. Channel 4 Playback Screen 10. Fast Forward

5. Playback Progress Bar 11. Load Recorded File(s)

6. Play 12. Channel Enable / Disable Select

5

27

Software Installation

Insert the CD into the CD-ROM of the PC.
Click on MY COMPUTER, double click on the drive where the CD-ROM is assigned by the PC
(for example: E;\) and you will find the Sec24 Media Player icon. Please read the following steps to
complete installation.

Sec24 Media Player icon

1. If Window 7 is running on your PC, please right click on icon “Sec24 Media Player” and select
“Run as administrator” option first to begin installation.

Note: The following error message will appear if you did not select “Run as

administrator” option first before starting the installation.

2. Double click the icon to start the installation process.

3. Click “Next” to continue the installation.

4. When the installation is completed, click “Finish” to exit the install wizard.

\

28

Playback Recorded File(s)

1. Double click the Sec24 Media Player icon on the desktop to start the software.

Sec24 Media Player icon

2. Click on “Load” to import and playback previous recorded files (SNX files) already stored on
your PC.

Note: You will first need to save the files from the Micro SD card to the PC first.

If your PC has a memory card reader then use the supplied memory card adaptor.

29

Channel Disable / Enable Select

During playback, all four channels can playback at once, including audio. For privacy concern, user

can select specific channel(s) for playback, with or without audio.
Select Audio to playback audio from channel 1 or 2 or 3 or 4
Select 1 to playback video image from channel 1
Select 2 to playback video image from channel 2
Select 3 to playback video image from channel 3
Select 4 to playback video image from channel 4
When more then one channel selected for playback, system will display playback screen in QUAD
format.
Audio is only synchronized to the video channel triggered by motion.

30

To add additional CCTV camera, first make sure the camera is powered
on. On your receiver, go to CAMERA SETUP in the system menu and
select preferred camera channel 2, 3 or 4 (channel 1 is dedicated for
DOOR Unit).

After selecting preferred camera channel (2, 3 or 4), tap PAIRING icon
to initiate the camera pairing process, you will have 30 seconds to
press the CAMERA's pair-key, which is located on the power cable
of the camera (see image below).

If camera's pair-key not pressed within the 30 seconds period,
"Pairing Fail" will display on receiver, in this case, tap PAIRING icon
again to re-initiate the pairing process, following with pressing the
CAMERA's pair-key.

31

ADDING ADDITIONAL CCTV CAMERA

CAMERA SETUP

Item

Function

1

CH1 (Doorphone 1)

- Pair

- Brightness

2-4

CH 2, CH3, CH4

(CCTV Camera)

- Pair

- Brightness

- Camera On/Off

5 Return to Setup Menu

Note:

A. Channel 1 is dedicated to
door unit only.

B. Only use camera specified
compatibility. NOT all CCTV
cameras will work with this
system. For more details
please contact your vendor.

32

PRODUCT SPECIFICATION

STORAGE MEDIA MANAGEMENT

SD Card Capacity Recording Time

1G 110 Minutes

2G 219 Minutes

8G 875 Minutes

16G 1750 Minutes

32G 3500 Minutes

Door Unit Receiver Unit

Maximum Unit(s) 1 1

Communica on Range 200 Meters (Line of Sight)

View Angle H: 90°±-3; V: 60°±-3 N/A

IR LED Wave Length 850nm N/A

Resolu on 640 x 480 (VGA) 800 x 480 (LCD)

Single Channel 640 x 480 (VGA)

Mul

ple Channel 320 x 240 (QVGA) per Channel

IR Night Vision Range 2 Meters N/A

Min. Illumina on 0 ~ 8Lux N/A

Max. Opera ng Current 120mA 800mA

Door Lock Voltage N/A (Dry Contacts) N/A

N/A

Max. Door Lock Current Handling 135mA per Pulse

Ba ery Charging Current 400mA

Opera ng Temperature/Humidity -10°C ~ 40°C / 0% ~ 80%

N/A