For detailed video instructions please visit jaybirdsport/support/
6 HRS + 10 HR CHARGING CASE
SWEAT & WATERPROOF (IPX7)
SPORT FIT - SECURE & COMFORTABLE
5 MIN = 1 HR OF PLAYTIME
Please refer to the safety warnings for important product safety information prior to installation or use of the product.
PREMIUM SOUND WITH CUSTOM EQ
MUSIC & CALLS
IN THE BOX
2
True Wireless Earbuds
USB Charging Cable
Charging Case
Silicone Eargels (Size 1 / 2 / 3)
PRODUCT OVERVIEW
Sport Fit Eargel
3
Multi-function
Button
Microphone
Magnetic Connectors
Charging Case LEDCase Button
FIT
For an assisted fit set up, please download the Jaybird App or visit
4
www.jaybirdsport.com/support/vista
Your Vista earbuds are fitted with size 2 (medium) eargels out of
A
B
the box. They are marked ‘L’ and ‘R’ for the left and right ear.
Place the earbuds firmly within your ears as shown in the
illustration.
SIZE
LEFT/RIGHT
2
L
L
If your earbuds are not comfortable, feel loose, or too tight try
C
alternative sized eargels (size1 or size 3).
Be patient, it may take some time to get the perfect fit.
It is quite common to use different sized eargels in each ear.
CHARGING – EARBUDS
Jaybird Vista offers you 6 hours of playback when fully charged. The charging case gives you one and a half additional
recharge cycles or 10 hours additional playback.
Your earbuds will start charging as soon as you place
them into the charging case and close the lid. The charging
case LED will indicate the charging status:
LED is pulsing white = Charging
LED is solid white = Fully charged
A 5 minute charge gives you up to 1 hour of playback.
5
A full charge of the earbuds can take up to 2 hours if
charging them from a discharged state.
CHARGING – CASE
It takes about 3.5 hours from a fully discharged state to charge your case.
With the case closed, connect the USB-C charging cable
tothe front of the charging case. The case LED will indicate
the charging status:
LED is solid red = charging case battery is low
LED is pulsing white = Charging
LED is solid white = Fully charged
6
PAIRING
To pair to a Bluetooth audio device follow the steps below
7
Place both earbuds
Open the charging case
ABC
intothe charging case
andclose the lid.
and press and hold
thecase button until
the case LED starts
blinking white.
On your Bluetooth
audio device, go to
Bluetooth settings
and select ‘Jaybird
Vista’. Onceconnected,
thewhite charging case
LED will turn off.
Jaybird Vista
DETAILED INSTRUCTIONS
CONTROLS - ON/OFF
AUTO POWER ON/OFF
Turn OFF - Placing your earbuds into the charging case will automatically
turn them off.
Turn ON - Removing your earbuds from the charging case will
automatically turn them on.
When your earbuds are out of the charging case and are not being used
they automatically power off after about 15 minutes.
8
MANUAL POWER ON/OFF
Turn OFF – Long press on either the left or right button will turn off both
earbuds.
Turn ON – A single press or long press will turn on only that particular
earbud. Repeat the same procedure on the other earbud to turn on the
earbud.
DETAILED INSTRUCTIONS
CONTROLS - MUSIC & CALLS
PLAYING MUSICCALLS
9
PRESS
DOUBLE PRESS
LONG PRESS
*You can customize a single or double press functions
within the Jaybird App
PLAY/PAUSE
NEXT SONGREJECT CALL
OFF
To turn on the earbuds, take them out of the
case or long press.
ACCEPT/HANG
UP CALL
DETAILED INSTRUCTIONS
THE JAYBIRD APP
10
54%10:23 AM
+
The Jaybird App lets you do the following:
• Customize the sound profile of your Vista earbuds.
• Change the language for your earbuds’ voice prompts.
• Set up the ‘Find Your Buds’ feature to track the location of
your earbuds.
• Use the ‘Find Your Fit’ feature to find the right fit for your
earbuds.
• Update your earbuds when new features and improvements
are available.
WARMTH
JAYBIRD SIGNATURE
WARMTH
REMOVE SHARPNESS
CUSTOMIZE
JAYBIRD ENHANCED
EXTENDED LISTENING
R & B FREAK
Your new sound settings are saved on your earbuds, so you can
take your custom sound with you no matter where you go with any
device you use.
Jaybird Vista
DETAILED INSTRUCTIONS
THE JAYBIRD APP
11
54%10:23 AM
SAVE
Save your new preset
to your dashboard
for easy access to all
SOUND
Customize your sound
settings. Changes are saved
to your Vista buds.
MUSIC
Find playlists to
power your run.
HEADPHONES
Adjust your
settings on your
buds.
Jaybird Vista
your favorite sound
settings.
HISTORY
Track through a
history of your
changes.
DEVICE
See your connected
device and battery
status.
DETAILED INSTRUCTIONS
THE JAYBIRD APP
12
54%10:23 AM
HEADPHONES
FIND MY BUDS
Lost one of your earbuds? Find out
where you left it in real time.
BUTTON CONTROLS
Customize your earbuds’ controls.
NAME
Rename your earbuds so
you can easily find
them on your devices.
FIND
MY BUDS
BUTTON
CONTROLS
NAME YOUR BUDS
NAME
SUPPORT & FEEDBACK
FIND YOUR FIT
Jaybird Vista
CONNECTED
ENG
VOICE
PROMPTS
AUTO
OFF
Jaybird Vista
Jaybird Vista
VOICE PROMPTS
Enable or disable
voice prompts.
TUTORIALS
Find tips on how
to optimize the
use of your earbuds.
DETAILED INSTRUCTIONS
SMARTWATCHES
With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair Vista to your
smartwatch. Use your smartwatch user manual for instructions on how to pair a Bluetooth device.
Apple WatchOSAndroid WearGarminSamsung
13
DETAILED INSTRUCTIONS
CONNECTION TIPS
You can use one (either left or right earbud) or both earbuds to connect
toyour audio device. If you use only one earbud leave the unused earbud
in the case for best results.
For best Bluetooth performance, try to reduce the distance between
yourearbuds and your audio device. Try to have your audio device in
anarm band, or in a belt pocket.
14
IDEAL DEVICE
LOCATIONS
TROUBLESHOOTING
Soft reset: If your earbuds are not responding, place your Vista in the charging case, close the lid for at least 5 seconds and plug
thecase into charge. This will turn your earbuds o and perform a soft reset.
Factory reset: If that does not resolve your problem we recommend resetting your earbuds to their original factory settings. Before starting
this process please FORGET or REMOVE your Vista device from the Bluetooth menu on all your connected audio devices.
Hard reset: If the battery has enough charge but the device does not turn on and you don’t hear any tones, press and hold the earbud
button for 20 seconds and then release. Put the earbud back in the case, wait for 5 seconds, then take the earbud out of the case.
15
Place both earbuds
ABCD
intothe charging case
and close the lid.
Open the charging
case and press & hold
the case button until
the case LED starts
blinking white.
While the charging case
LED is blinking white,
press the button on
the case twice.
The LED will blink
pink. Once it stops
close the case.
Your earbuds are
reset and ready to
pair. Go to your audio
device Bluetooth
menu and select
“Jaybird Vista”
topair again.
SPECIFICATIONS
Bluetooth Version5.0
CodecSBC
ProfileHandsfree profile: HFP with wideband speech, A2DP, AVCRP, SPP
Effective Range10 meters (30 feet)
Play Time6 Hrs*
Power Bluetooth headset: 5.0V , 1A
Charging Time2 Hrs
Quick Charge5 Min = 1 Hr play time
16
Dimensions Size: 20.3 (W) x 15.3 (D) x 17.9(H) mm earbud size / 74 (W) x 36.4 (D) x 24.5(H) mm case size
* Playtime and standby time may vary due to usage conditions. Adding additional bass to your sound profile through the Jaybird app will reduce play time.
17
WARRANTY, WARNINGS & SAFETY
Full warranty, care & maintenance details at:
jaybirdsport.com/warranty +1.866.244.3399
WARNING: Due to the isolating characteristics of these earbuds do not use while driving, riding a bike or where vehicular traffic is present, or in any other activity where failure to hear surrounding sounds could be
dangerous. Use of these earbuds at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to inserting objects into ear canal, use at own risk. Do not
wear the device while it is connected to a power source driven from main 110V or 220V lines.
Copyright 2019 Jaybird, LLC. All rights reserved. Jaybird, and the Jaybird logo are trademarks of Jaybird, LLC. Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to Jaybird, LLC. iPhone, iPad and iPod
are trademarks of Apple, Inc., registered in the US and other countries and App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners. Android is a trademark of Google Inc. in
the United States and other countries.
WATERPROOF
Your Jaybird Vista earbuds feature an IPX7 waterproof rating. Vista earbuds are designed to handle rain, mud and outdoor adventures.
Jaybird earbuds are not designed for swimming, showering or exposure to pool or ocean water. In case of exposure to salted or chlorinated water, rinse the earbuds gently with fresh water and air dry before use.
The charging case is not water resistant, so please ensure your earbuds are completely dry before charging.
EARGEL CLEANING
Keeping your Jaybird earbuds eargels clean is essential for safe, hygienic use.
IMPORTANT: DO NOT attempt to clean the eartips without first removing them from the earbuds.
1. Firmly grip the eargel with one hand and the earbud with the other. Carefully remove the eargel from the earbud.
2. Use warm water and mild soap on a damp cloth to remove dirt and earwax from the eargel. Do NOT use harsh cleaning agents.
3. Rinse and completely dry your eargel before placing them back on your earbuds.
4. Carefully push the eargel back onto the earbuds.
LISTEN RESPONSIBLY
Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels
may cause permanent hearing disability.
Do not use around road traffic.
CARE AND MAINTENANCE
Clean eargels regularly of dirt and wax buildup. To clean, remove eargels from earbuds, then gently wipe away
dust and oil with a dry cloth, and/or use warm water and mild soap to remove buildup. Rinse and completely dry
before reattaching.
18
Before charging, ensure earbuds are completely dry of sweat and water.