JayBird F5 User Manual

FREEDOM
USER GUIDE
FCC ID: XX8-F5 IC: 20385-F5
ENGLISH
SET-UP
Quick Start ................................................................................................................. 3
In-the-box ................................................................................................................... 9
Fit ............................................................................................................................... 10
Comply ........................................................................................................................ 11
Ear Fins ...................................................................................................................... 13
Cord Management Clips.............................................................................................. 16
Cord Clip ..................................................................................................................... 18
Power On: Music & Calls ............................................................................................. 19
MySound App .............................................................................................................. 20
Charging / Battery Status .......................................................................................... 22
Charging Clip .............................................................................................................. 24
Controls for Music and Calls ...................................................................................... 29
Pairing ........................................................................................................................ 30
Multipoint ................................................................................................................... 32
ShareMe ..................................................................................................................... 34
Smartwatches ............................................................................................................ 36
Troubleshooting ......................................................................................................... 37
Specs & Warranty ...................................................................................................... 38
QUICK START
3
REMOVE
DO NOT
PULL CORD
ATTA CH
“POWER ON”
“SEARCHING FOR YOUR MUSIC DEVICE”
“HEADPHONES CONNECTED”
PAIRING
4 SEC PUSH
LISTEN FOR
VOICE PROMPT
4
CUSTOMIZE YOUR SOUND SETTINGS AND SAVE THEM TO YOUR BUDS
MYSOUND
5
6
COMPLY
EAR TIPS
CHOOSE THE FIT OPTION/ COMBINATION
TM
SILICONE EAR FINS
SILICONE EAR TIPS
THAT WORKS BEST FOR YOU
UNDER-EAROVER-EAR
FOR RUNNERS
SHORTEN CORD TO KEEP THE CONTROLLER SNUG.
7
UNDER-EAR
OVER-EAR
WITH COMPLETE
REMOTE CONTROLS
PAGE 21
SHARE MEMUSIC + CALLS
SHARE 1 DEVICE
WITH 2 BUDS
PAGE 37
PAIRING
REMEMBER UP
TO 8 DEVICES
PAGE 32
MULTIPOINT
CONNECT YOUR
BUDS TO 2 DEVICES
SIMULTANEOUSLY
PAGE 35
8
Video instructions at jaybirdsport.com
LEAVE YOUR PHONE BEHIND & PAIR WITH YOUR SMARTWATCH
PAGE 39
MYSOUND APPSMARTWATCH
CUSTOMIZE YOUR SOUND
SETTINGS AND SAVE THEM
TO YOUR BUDS
PAGE 22
IN-THE-BOX
1. Freedom Bluetooth Headphones
2. 3 pairs Silicone Eartips (S,M,L)
3. 3 pairs Comply
Eartips (S,M,L)
4. 3 Pairs Ear Fins (S,M,L)
5. USB Charging Cable
6. 2 Cord Management Clips
7. Cord Clip
8. Charging Clip
9. Carry Pouch
TM
Premium Foam
1.
4.
2.3.
5.
6.
7.
8.
9
9.
FIT
GREAT SOUND PERFORMANCE IS IN SELECTING THE RIGHT SIZE EARTIP
We love great sound. Make sure you hear it. Because everyone’s ears are different, be sure to try all sizes of eartips. Only with the right size eartips will you enjoy a snug fit & premium sound quality.
10
SILICON EAR TIPS
TM
COMPLY
PREMIUM
SPORT FOAM EAR TIPS
COMPLY
3 4
Pull ear back to open ear canal for a deeper more secure fit. Insert entire foam tip into ear.
TM
Premium Comply™ Foam ear tips exclusively designed for Jaybird Freedom deliver maximum noise isolation and comfort.
1 2
Slide Comply Foam tip onto Freedom speaker housing.
11
Compress Comply Foam tip by rolling with fingers.
entire foam tip into ear.
Secure-Fit: Expands to give you a custom fit and remarkable in-ear retention. Your earbuds remain secure whether you’re in the gym, on the slopes, or on the go.
Soft Comfort: Unique memory foam provides all-day comfort, while eliminating in-ear irritation and fatigue.
3 4
Pull ear back to open ear canal for a deeper more secure fit. Insert
12
Noise Blocking: Allows you to enjoy your music in noisy environments without raising the volume.
Audio Experience: Creates an optimal seal and channels sound directly into the ear canal, transforming your listening experience.
15-30
seconds
Hold in place 15-30 sec for foam to expand and create a seal.
EAR FINS
INSTALL YOUR PREFERRED SIZED SECURE FIT EAR FINS AS SHOWN.
13
SIZE LEFT / RIGHT
LEFT
RIGHT
Slide the secure-fit ear fins back until the ridges in the fins line up with the grooves on the buds.
14
LOCK THE TIP OF THE EAR FIN INTO THE TOP OF THE BOWL OF THE EAR AS SHOWN.
You should have a snug fit with contact on the lower, back and top portions of the bowl of the ear.
15
CORD MANAGEMENT CLIPS
BEFORE FITTING, INSTALL THE CORD MANAGEMENT CLIPS TO REDUCE THE SLACK FOR A CUSTOMIZED FIT.
16
17
THE CORD CLIPS CAN BE USED IN THREE WAYS TO MANAGE THE LENGTH OF YOUR CORD AND FIND THE RIGHT FIT FOR YOU.
CORD CLIP
USE THE INCLUDED CORD CLIP TO SECURE YOUR FREEDOM BUDS TO THE BACK OF YOUR SHIRT.
18
POWER ON
PUSH 1 SEC PUSH 4 SEC PUSH
MUSIC & CALLS
PAIR HEADPHONES TO YOUR MUSIC DEVICE, PLAY MUSIC, AND TRY EACH SIZE OF EARTIP TO FIND THE BEST FIT AND SOUND PERFORMANCE.
A proper seal is essential for you to fully appreciate the high quality audio of Freedom.
MICROPHONE
ALTERNATING RED & GREEN
19
VOICE PROMPT: “Searching...”
FROM OFF STATE HOLD FOR 4 SEC TO PAIR. FROM ON STATE HOLD 4 SEC TO POWER OFF.
ON
MYSOUND APP
TO CUSTOMIZE THE SOUND PROFILE ON YOUR NEW FREEDOM BUDS DOWNLOAD THE JAYBIRD MYSOUND APP IN THE APPLE OR GOOGLE PLAY STORE.
Your new sound settings are saved right on your buds, so you can take your custom sound with you no matter where you go with any device you use.
NOTE: The MySound app works with Jaybird Freedom. Other manufacturers and older Jaybird headphones are not supported.
WARMTH
JAYBIRD SIGNATURE
+
CUSTOMIZE
JAYBIRD ENHANCED
20
WARMTH
REMOVE SHARPNESS
DASHBOARD DISCOVER PROFILE
EXTENDED LISTENING
R & B FREAK
Jaybird Freedom
MORE
60%
SOUND
Customize your
sound settings.
Changes are
saved to your
Freedom buds.
MUSIC
Indicates if
music is playing
on your device.
SAVE
SAVE
Save your new preset to your dashboard for easy access to all your favorite sound settings.
HISTORY
Track through a history of your changes.
DISCOVER
Discover presets
from athletes and
other users.
21
DASHBOARD DISCOVER PROFILE
HISTORY
Jaybird Freedom
MORE
DEVICE
See your connected device and battery status.
60%
CHARGING / BATTERY STATUS
Q
U
I
C
HRS
HRS
ON BUDSON CLIP
4
4
8
HRS
PLAY TIME
Charging the battery before use is recommended but not required. Freedom ships partially pre-charged, however initial charge will vary.
Look for this Bluetooth headset battery status icon in the top right corner of your iPhone screen.
Or this icon in the bottom right in the MySound app to see t he status of Freedom’s battery.
20
MIN
1 HR
=
PLAYTIME
22
K
90%
BATTERY LEVEL
C
The MySound App is able to report
H
A
the battery level of your Freedom
R
headphones to a 1% accuracy.
G
E
When not connected to the MySound App, your Freedom headphones will announce an average battery level when you turn them on. Alternatively, an average battery level announcement can be triggered by pressing the Volume + or Volume – button when connected and not playing music.
On your Freedom headphones the values are rounded to the nearest 20%. 26% reported in the App for example would result in the following prompt: “Battery 20 percent”.
VOICE PROMPT
When not playing music, pressing ‘Volume + or Volume –’ will announce battery status.
MICRO USB CHARGING
The charging clip that came with your buds also acts as a charging dock. 2.5 hrs for full charge gives 4 + 4 hours of playtime. 20 mins charging gives 1 hour of play time. The clip can also be charged separately and used at a later time.
23
ARE THE HEADPHONES ON? IS THE BATTERY LOW?
In Standby* mode, push +, watch LED: Single Green Flash =
10% or more battery remaining
Single Red Flash =
Below 10% battery remaining
No Light = Powered off
* Standby Mode: Powered and not connected to a
device but not playing music or on a phone call.
LED STATUS
Red: Charging
Green: Charged (while charger clip is attached)
Red+Green Alternating: Pair Mode
No Light: Standby / Play Mode /
Phone Call / Powered Off
24
CHARGING CLIP
To charge your freedom buds, securely attach the charging clip to the back of the controller and insert the micro USB end of your included cable into the bottom end of the charging clip. Plug the other end into any 5V 500mA USB power source.
This charges both your buds and the charging clip simultaneously for extended listening.
RED LED = CURRENTLY CHARGING
GREEN LED = FULLY CHARGED (with USB cable connected to a power source)
25
4 HRS + 4 HRS
= 8 HRS PLAY TIME
USING THE CHARGING CLIP TO CHARGE YOUR BUDS
In addition to using the USB charging cable, your charging clip can charge your buds without having to be connected to a power source. Your charging clip has an internal battery and circuitry that extends your play time by 4 hours. Simply attach it to the back of the controller and it automatically start charging.
Every time you attach the charging clip it will reset your buds by turning them off. You may turn the your buds ON and continue to listen to your music while the charging clip is attached and transferring power.
NOTE: Although the freedom buds are sweat­proof, the charging clip is not. Exposing to moisture or sweat will void the warranty.
Do not use your buds while the USB cable is plugged into a power source. Doing so could cause an electric shock if your power source develops an electrical fault.
26
REMOVE
AT TACH
ATTACHING & REMOVING THE CHARGING CLIP
Attach the charging clip by pushing it directly onto the back of the controller until you feel it click securely in place.
When removing the charging clip apply pressure to the top of the controller and separate it from the charging clip.
27
DO NOT PULL CORD
When removing the clip
DO NOT pull on the cord.
Doing this may cause damage to your device.
CHARGING CLIP
MICRO USB
STANDARD USB
Charge your buds/charging clip through any native 5V 500mA USB power source. If you use a USB wall or car adapter ensure that is supplies no more than 5V 500mA. USB adapters that supply more that 5V 500mA may harm smaller electronic devices and may void your warranty. We recommend using Jaybird approved USB wall and car adapters (available at jaybirdsport.com).
28
CONTROLS
MUSIC & CALLS
When not on a call or playing music: On center button activates Siri or Voice Commands
If you have a 2nd incoming call: On center button will answer
29
2nd call, hold active and switch between active and hold
PUSH 1 SEC PUSH 4 SEC PUSH
ADDITIONAL CALL COMMANDS
Switch call to Freedom, Answer 2nd call, end call.
Reject 1st/2nd call,
ON
OFF
switch between 2 calls, voice dial
Redial
Mute & un-mute call
PAIRING
30
1. With headphones turned off, & within 1 meter (3 ft) of music device, press & hold center key for more than 4 sec until you see alternating red/green LED and a voice prompt saying “Searching for your music device”.
2. On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices.
3. Check for “Freedom” and select (enter passcode 0000 if prompted).
4. Freedom voice prompt will say “headphones connected”.
5. If the pairing is not successful, switch off headphones by pushing the center key for more than 4 seconds and repeat the steps outlined above.
Jaybird Freedom
PAIRING WITH A BLUETOOTH ADAPTER
1. Place headphones and mobile phone within 1 meter (3 feet) of each other.
2. Put the headphones into pair mode as outlined on prior page.
3. If using BAU Universal Bluetooth Adapter put into pair mode also (see BAU manual).
4. Plug the Bluetooth adapter into the music device and play a song.
5. The headphones and adapter will pair automatically (passcode of adapter must be 0000).
6. After successful pairing and connecting, the headphones will say “Headphones connected”.
31
MULTIPOINT
PAIRING WITH SEVERAL BLUETOOTH DEVICES
Multipoint enables you to simultaneously pair and connect your buds with two different Bluetooth devices. For example you can have your Freedom buds connected to your laptop and your phone at the same time. You can listen to music from your laptop and are still able to answer an incoming call on your phone using your Freedom buds controller. Pretty wicked, eh?!
32
MULTIPOINT
1. Pair your buds to the first device.
Jaybird Freedom
2. Put your buds back in pairing mode and then hold down the center button.
3. Search and select your Freedom buds on the second device.
33
Jaybird Freedom
SHARE ME
Share the music you are listening to with another pair of Freedom buds. Follow these steps to connect a second pair of headphones. Love is in the air!
34
SHARE ME
1. Power on both buds, with just one of the buds paired and connected to only one device.
1 2
35
2. Push and hold Vol + on the connected buds, while you push and hold the Vol - button on the second buds until both device LEDs flash alternating red and green.
Both buds will be connected
when the LEDs stop flashing and “Headphones connected” will play on both buds.
3. Play Music.
SMARTWATCHES
With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair with your buds. Now that’s freedom!
NOTE: Some smartwatches use a weaker Bluetooth signal strength which may cause possible intermittent signal drop.
Works with smartwatches like:
APPLE MOTOROLASAMSUNG
36
TROUBLESHOOTING
RESET
If your buds are not responding, connect the charging clip and USB cable to a power source. This will turn your buds off and perform a soft reset.
FACTORY RESET
1. To reset your buds to their original factory
settings put your buds in pairing mode by turning the buds off then press & hold the center button for more than 4 sec until you see alternating red/green LED.
2. While the LEDs are flashing red / green double tap the center button. Upon successful factory reset, the LED turns orange and the device turns off.
NOTE: Once your buds have been reset and you power on they will automatically go into pairing mode. Select “Forget” or “Remove” Jaybird Freedom from your device’s Bluetooth menu and pair again.
37
LED
SPECIFICATIONS
Bluetooth Version 4.1, Multipoint
Codecs SBC, Customized SBC, AAC (customized SBC codec offers
Profile Handsfree , Headset , A2DP , AVCRP , SPP
Effective Range 10 meters (30 feet)
Play Time 8 Hrs* (4 hrs on buds plus an additional 4 hrs with
Standby Time 110 Hrs*
AC Power DC 5V 500mA
Charging Time 2.5 Hrs
Quick Charge 20 Min = 1 Hr play time on buds + an extra hour through
Dimensions 23 x 13 mm earbud size, 490 mm cord length
Weight Approx 13 g
* Play time and standby time may vary due to usage conditions. Adding additional bass to your
sound profile through the MySound app may slightly reduce play time.
38
high fidelity sound without needing APT-X)
included charging clip)
charging clip
WARNINGS, WARRANTY, CARE & MAINTENANCE
Full warranty, care & maintenance details at jaybirdgear.com/warranty +1.866.244.3399
WARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to inserting objects into ear canal, use at own risk. Do not wear the device while it is connected to a power source driven from main 110V or 220V lines.
Copyright 2016 Jaybird, LLC. All rights reserved. Jaybird, and the Jaybird logo are trademarks of Jaybird, LLC. Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to Jaybird, LLC. iPhone is a trademark of Apple, Inc., registered in the U.S. and other countries. Manufactured under Freebit patent numbers EP2177045, US8630436, US8976995 and corresponding international patents. Assembled in Malaysia.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled. Do not dispose of the battery in fire, as it may cause explosion.
Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 - Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
Article 14 - The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
39
LISTEN RESPONSIBLY
Avoid excessive volume levels and prolonged
periods of listening. Prolonged listening
at excessive volume levels may cause
permanent hearing disability.
Do not use around road traffic.
Video instructions at jaybirdsport.com
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the foll (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.
owing two conditions:
Loading...