Jaxx ICRY1067 Other

REPORT NUMBER: SHAT04789488

As Received

TEST REPORT

Number : SHAT04789488

Applicant : MORGAN SHANGHAI LTD.,CORP Date : Jan 12, 2017
UNIT 1, NO. 20, BAOQING RD. XU'HUI

DISTRICT, SHANGHAI, CHINA 200031

Attn : KATHERINE ZHAO

Sample Description As Declared :

No. Of Sample : One (1)
Fibre Content : ­Material : Bonded Fabric
Finishing : ­End Uses : ­Colour : Pewter
Style No. : Wrangler
Order No./PO No. : ­Buyer’s Name : ­Manufacturer’s Name : ­Ref. : -

Applicant’s Provided Care Instruction/Label : -

Date Received/Date Test Started : Jan. 07, 2017

Prepared And Checked By:
For Intertek Testing Services Ltd.,Shanghai

Jennifer Ren
Assistant General Manager of Textile Division

Page 1 Of 5

Intertek Testing Services Ltd., Shanghai

2/F., Building No.4, Shanghai Comalong Technology Service Park,

Tel: [phone] Fax: [phone] E-mail: [e-mail]

No.889 Yishan Rd., Shanghai 200233, China

TEST REPORT

Number : SHAT04789488

Tests Conducted (As Requested By The Applicant)

1 Color Fastness To Crocking (AATCC 8-2013):

Dry 4.5
Wet 4.5

2 Color Fastness To Light (AATCC 16.3-2014, Option 3, Xenon-Arc Lamp):

20 Hours Exposure
Grade 3

3 Color Fastness To Light (AATCC 16.3-2014, Option 3, Xenon-Arc Lamp):

40 Hours Exposure
Grade 2.5

4 Tensile Strength As Received (ASTM D5034-2009(2013), 1-in Grab Test, Tensile Testing Machine, CRE):

Warp 153.5 lbf
Weft 96.4 lbf

5 Elongation Test As Received (Ref. To P21 Of "Joint Industry Fabric Standards And Guidelines"):

Warp 8.2%
Weft 24.4%

Remark: Elongation Test At 10 Lbs.

Page 2 Of 5

Intertek Testing Services Ltd., Shanghai

2/F., Building No.4, Shanghai Comalong Technology Service Park,

Tel: [phone] Fax: [phone] E-mail: [e-mail]

No.889 Yishan Rd., Shanghai 200233, China

TEST REPORT

Number : SHAT04789488

Tests Conducted (As Requested By The Applicant)

6 Tearing Strength As Received (ASTM D2261-2013, Single Rip Tongue Tear, Tensile Testing Machine, CRE):

Across Warp Crosswise Tear At 18.8 lbf
Across Weft 12.2 lbf

7 Seam Slippage As Received (ASTM D4034-1995, Tensile Testing Machine, CRE):

S.O. ¼”
// To Warp *
// To Weft *

Strength
// To Warp 91.1 lbf(FR)
// To Weft 155.6 lbf(FR)

Remark : S.O. ¼” = Seam opened at ¼ inch

8 Pilling Resistance As Received (ASTM D3512/D3512M-10 (2014), Random Tumbler):

After A 60-Minute Test
Rating 3.5

FR = Fabric ruptured
* = The seam opening was less than ¼ inch though the ultimate Seam strength was found as

stated.

Page 3 Of 5

Intertek Testing Services Ltd., Shanghai

2/F., Building No.4, Shanghai Comalong Technology Service Park,

Tel: [phone] Fax: [phone] E-mail: [e-mail]

No.889 Yishan Rd., Shanghai 200233, China

TEST REPORT

Number : SHAT04789488

Tests Conducted (As Requested By The Applicant)

9 Abrasion Resistance (ASTM D4157-2013, Oscillatory Cylinder Method, Cotton Duck #10 Abradant With 3 lbs

Pressure Load And 4 lbs Tension Load):

Resistance
Warp Over 100000 Cycles
Weft Over 100000 Cycles

Remark: End Point Is 100,000 Cycles.

10 Flammability Test (California Technical Bulletin 117-2013 Section 1: Cover Fabric Test):

Test Method

The apparatus and method of testing were those described in California Technical Bulletin 117-2013, Section 1,
for measuring the tendency of upholstery cover fabrics to smolder and contribute to fire propagation, when
subjected to a smoldering ignition source.

Pass/Fail Criteria

A cover fabric material is considered pass or fail based on following criteria:

1. A single mock-up test specimen fails to meet the requirements of this test procedure if any of the following
criteria occurs:
a) The mock-up test specimen continues to smolder after the 45 minutes test duration.
b) A vertical char length (measured as specified in step 11.9 of ASTM E1353-08a

ε1

) of more than 1.8 inches

(45 mm) develops on the cover fabric.

c) The mock-up test specimen transitions to open flaming.

2. The cover fabric passes the test if three initial mock-up specimens pass the test, i.e., the cigarettes burn
their full length and the mock-ups are no longer smoldering.

3. If more than one initial specimen fails, the cover fabric fails the test.

4. If any one of the three initial specimens fails, repeat the test on additional three specimens.

5. If all three additional specimens pass the test, the cover fabric passes the test. If any one of the additional
three specimens fails, the cover fabric fails the test.

Page 4 Of 5

Intertek Testing Services Ltd., Shanghai

2/F., Building No.4, Shanghai Comalong Technology Service Park,

Tel: [phone] Fax: [phone] E-mail: [e-mail]

No.889 Yishan Rd., Shanghai 200233, China

TEST REPORT

Number : SHAT04789488

Tests Conducted (As Requested By The Applicant)

Flammability Test (CONT'D)

Test Result

Initial Test

Vertical Char length

(Inches)

Mock-up specimen
continues to
smolder After 45
Minutes

Mock-up test

specimen

transitions to open

flaming

Test Result

Specimen 1 0.6 No No Pass
Specimen 2 0.7 No No Pass
Specimen 3 0.6 No No Pass

Conditioning : At least 24 hours in an atmosphere having a temperature of 21° ± 3 °C (70° ± 5 °F) and less

than 55% relative humidity

Remark : No = Was not observed

End of Report

This report is made sole ly on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action.
Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly
contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save
as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in
connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct.

Page 5 Of 5

Intertek Testing Services Ltd., Shanghai

2/F., Building No.4, Shanghai Comalong Technology Service Park,

Tel: [phone] Fax: [phone] E-mail: [e-mail]

No.889 Yishan Rd., Shanghai 200233, China