JAXJOX Kettlebell Connect KB42 User Manual

1

Kettlebell Connect™

© 2018 JAXJOX

Model: KB42

1

TABLE OF CONTENTS

Congratulations ________________ 2

What’s in the box _______________ 3

Assembly ______________________ 5

Get started with the
JAXJOX

®

app __________________ 7

Use the Kettlebell Connect™ ____ 13

Troubleshooting _______________ 18

Safety warnings ________________ 23

Satisfaction guarantee _________ 25

Limited warranty _______________ 26

How to obtain warranty service _ 27

Questions or Concerns _________ 27

Notices ________________________ 28

2

Congratulations

Congratulations on your purchase of
the JAXJOX

®

Kettlebell Connect™, an

innovative training tool designed to

Its elegant design and advanced
technology result in a single kettlebell
that adjusts from 12 lbs (5.4 kg) to 42
lbs (19 kg). By connecting the Kettlebell
Connect™ to the JAXJOX

®

app, you can

set your goals, track your workouts,

JAXJOX

®

Read and understand the contents of
this manual before attempting to use the
Kettlebell Connect™.

3

What’s in the box

Kettlebell Shell

Base

Weights

4

Charging cable & AC adapter

Carefully remove all items from the

to assembly. Verify that all of the
components have been included.

the product to your point of purchase or
contact JAXJOX

®

at:
[e-mail] or
[phone]

Charging cable & AC adapter

5

Assembly

• We recommend using and storing
your Kettlebell Connect™ on the

Charge the Kettlebell Connect™

• Plug the charging cable into the
AC Adapter.

• Plug the other end of the charging
cable into the base of the Kettlebell
Connect™.

• Plug the AC Adapter into a
power outlet.

Stack the weights one at a time

• Facing the base’s screen, place the
weights on the base in reverse order,
starting with 5 (on the bottom) and
ending with 1 (on the top).

1
2
3
4
5

Ensure the notches are directly to
the side, towards the wings of the
base. The number on the weight
should appear right side up.
Seat the weights completely,
ensuring there are no spaces in
between each of the weights.

Lower the kettlebell shell over the
top of the weights, ensuring the
kettlebell’s handles are aligned with
the wings of the base.
You should not need any additional
force to seat the kettlebell shell
in the base when all of the
components are properly aligned.
When properly seated and ready
for use, the Kettlebell Connect™ will
beep once.

6

• Ensure the notches are directly to
the side, towards the wings of the
base. The number on the weight
should appear right side up.

• Seat the weights completely,
ensuring there are no spaces in
between each of the weights.

Place the kettlebell shell onto the base

• Lower the kettlebell shell over the
top of the weights, ensuring the
kettlebell’s handles are aligned with
the wings of the base.

• You should not need any additional
force to seat the kettlebell shell
in the base when all of the
components are properly aligned.

• When properly seated and ready
for use, the Kettlebell Connect™ will
beep once.

the correct order for the Kettlebell Connect™ to
function properly. Incorrect assembly of the weights
and kettlebell shell may result in damage to the
Kettlebell Connect™ or result in serious injury.

7

Get started with the
JAXJOX

®

app

The JAXJOX® Kettlebell Connect™ is
compatible with mobile devices that
support iOS and Android. To get the
most from your Kettlebell Connect™,
install the JAXJOX

®

app and connect it

with your device.

Download the app from the app store of
your device.

• For iOS devices, you must have iOS
version 10 or higher installed on
your device.

• For Android devices, you must have
Android version 5 or higher installed
on your device.

If you already have a JAXJOX

®

account,
sign in with your email address and
password.

If you do not already have an account,
create one by entering your email
address and a password.

8

To get the most out of the JAXJOX® app
and obtain your JAXJOX

®

JAXJOX

®

to calculate your JAXJOX

®

iQ™, a simple, easy to understand

Note: If you do not have any additional
JAXJOX

®

devices connected to the app,
or have never tracked your workouts
with the JAXJOX

®

app, it will take seven

days of workouts before your JAXJOX

®

9

Ensure Bluetooth is turned on for
your device.

• Refer to your device’s
documentation for instructions on
how to turn on Bluetooth.

In the JAXJOX

®

app, press Add Device

to add the Kettlebell Connect™.

10

Ensure your Kettlebell Connect™ is
charged and nearby.

Choose your Kettlebell Connect™.

When successfully connected, the
success screen displays.

Choose Set Your Goals
kettlebell workout goals.

11

Set your kettlebell workout goals by

• Reps

• Sets

• Weight

12

Use the app’s dashboard to quickly
see the progress you’ve made on your

JAXJOX

®

Take advantage of workout videos in

next level.

13

Use the Kettlebell Connect™

Activate the Kettlebell Connect™

• Press either the – or + on the base
to activate the Kettlebell Connect™.

• The screen will display a bluetooth
logo to remind you to connect the
Kettlebell Connect™ with
your mobile device and the
JAXJOX

®

app.

Select the person using the Kettlebell
Connect™

• Press and hold either the – or
+ button for three seconds and
choose the person using the
Kettlebell Connect™.

• The Kettlebell Connect™ supports
up to 9 users, from P1 to P9.

14

Adjust the weight of the kettlebell

• Press the – or + button to choose

the desired weight for your workout.

• The Kettlebell Connect™ can be
adjusted from 12 lbs (5.4 kg) to 42
lbs (19 kg) in increments of 6 lbs
(2.7 kg).

• Note that you can cycle through
the available weight continuously,
meaning if you are on 42 lbs (19kg),
you can quickly change to 12 lbs
(5.4 kg) by pressing the + button.

• The Kettlebell Connect™ takes
approximately 3 to 5 seconds to
change to your selected weight.
The weight loading animation plays
while the weight is adjusting. Do not
move the Kettlebell Connect™ while
it is adjusting.

• The Kettlebell Connect™ will beep
once when ready for use.

15

Lift the kettlebell shell from the base

• Wait for the single beep before
moving the kettlebell shell.

IMPORTANT: Always lift the kettlebell
shell straight up and clear the weights
and base before attempting to use it. Not
doing so may result in serious injury.

Workout with the kettlebell

• Before starting your workout, ensure
your environment is free of anything
that may interfere with your
movements.

• Do not drop the kettlebell or use
excessive force when moving the
kettlebell.

IMPORTANT: Do not attempt to adjust
any of the mechanisms on the underside
of the kettlebell shell. Do not attempt
to manually adjust the weight of the
kettlebell shell. Doing so may result in
serious injury and/or device malfunction.

16

Return the kettlebell shell to the base

• Avoid using excessive force when
reseating the kettlebell shell into the
base.

• Ensure the kettlebell shell and
weights are aligned properly with
the base when reseating. You
should not need any additional force
to reseat the kettlebell shell when
all of the components are properly
aligned.

• The kettlebell shell can be reseated
with the JAXJOX

®

logo facing

forwards or backwards.

• The Kettlebell Connect™ will beep
once when properly seated.

Change the unit of measurement

• Your chosen unit of measurement
(LB or KG) appears in the top right
corner of the screen.

• To change the unit of measurement
between pounds and kilograms,
press both – and + buttons at
the same time and hold for two
seconds.

17

Reset the Kettlebell Connect™

• If you are experiencing issues with
your Kettlebell Connect™, resetting
the device may correct them.

• To reset the Kettlebell Connect™,
press the reset button on the
underside of the base, highlighted in
the diagram.

18

Troubleshooting

Low battery

• Charge the Kettlebell Connect™.

• Verify that the charging cable is fully
inserted into the base and the AC
adapter.

• Verify the AC adapter is plugged into
a functioning power outlet.

Bluetooth not connecting

• Verify the Kettlebell Connect™ has
been added in the JAXJOX

®

app.

• Verify bluetooth is enabled on your
mobile device.

• Follow the instructions in the Get

Started with the JAXJOX

®

App

section.

Charge the Kettlebell Connect™.
Verify that the charging cable is fully
inserted into the base and the AC
adapter.
Verify the AC adapter is plugged into
a functioning power outlet.

Verify the Kettlebell Connect™ has
been added in the JAXJOX

®

app.
Verify bluetooth is enabled on your
mobile device.
Follow the instructions in the Get

Started with the JAXJOX

®

App

section.

connection no connection

19

Kettlebell Connect™ is not adjusting
weight

• Ensure the kettlebell shell is
properly seated before adjusting the
weight. The Kettlebell Connect™ will
beep when seated correctly.

• Verify the weights are stacked
correctly in the right order. Follow
the instructions in the Assembly
section.

• The weight of the kettlebell shell
may be misaligned with the weight
on the base. Follow the instructions
below in The weight on the kettlebell

shell is not matched to the weight on
the base section.

20

Kettlebell Connect™ is not beeping
when reseating the kettlebell shell onto
the base

• When reseating the kettlebell shell,
ensure it is aligned correctly with
the base. The handles should align
with the wings on the base.

• Ensure the kettlebell shell is fully
seated completely. It should sit fully
against the base, without space in
between.

• Verify the weights are stacked
correctly in the right order. Follow
the instructions in the Assembly
section.

• The weight of the kettlebell shell
may be misaligned with the weight
on the base. Follow the instructions
below in The weight on the kettlebell

shell is not matched to the weight on
the base section.

21

The weight on the kettlebell shell is not
matched to the weight on the base.

• WARNING: Manually adjusting the
weight of the kettlebell shell may
cause serious injury or damage
to the device. It may also cause a
mismatch between the weight of
the kettlebell shell and the base,
causing the device to become
inoperable. In this event, follow all
safety precautions noted before

• IMPORTANT: Perform these actions
low to the ground and keep all body
parts out of the direct path of the
kettlebell weights.

• Weight mismatch can be corrected
by manually removing the weights in
the kettlebell shell and adjusting the
shaft to the correct position.

• Flip the kettlebell shell upside down
so you are viewing the underside of
the kettlebell shell.

• Locate the shaft in the center of the
kettlebell shell. Press the locking
pin and turn the shaft counter­clockwise.

• IMPORTANT: Pressing the locking
pin will unlock any weights inside
the kettlebell shell, and may result
in serious injury if allowed to fall.
Slowly rotate the kettlebell shell
right side up, keeping one hand on
the weights inside to slowly lower
them out of the kettlebell shell and
onto the ground.

22

• With the all weights removed from
the kettlebell shell, press the locking
pin and turn the shaft counter­clockwise until the teeth are aligned
with the middle of the kettlebell
shell, as illustrated in the diagram.

• Return the weights to the base in the
right order. Follow the instructions in
the Assembly section.

• Ensure the weight on the base is set
to 12 lbs (5.4 kgs).

• Return the kettlebell shell to the
base. The Kettlebell Connect™
should now operate correctly.

23

Safety warnings

The Kettlebell Connect™ is very heavy –

minimize risk of injury. Before starting
your workout, ensure your environment
is free of anything that may interfere
with your movements.

When moving the Kettlebell Connect™,
disassemble all of the parts and
reassemble them in the new location.
Do not attempt to move the entire unit
at one time.

Consult your physician before starting
a workout plan. If you experience
faintness, pain, or shortness of breath,
stop exercising immediately and consult
a physician.

Select a weight and perform a workout

The Kettlebell Connect™ is not a toy. Do
not allow children or pets to play with
or around the device. Supervise and
provide instruction to anyone under the
age of 18 using the device.

Ensure weights are properly seated
in the correct order. Ensure kettlebell
shell is properly seated in the base (the
Kettlebell Connect™ will beep once)
before adjusting the weight.

24

Avoid using excessive force when
reseating the kettlebell shell into the
base. Ensure the kettlebell shell and
weights are aligned properly with the
base when reseating. It should not
require any additional force when all of
the components are properly aligned.

Do not drop the kettlebell or use
excessive force when using the
kettlebell. Do not move the Kettlebell
Connect™ while the weight is being
adjusted. Always lift the kettlebell shell
straight up and clear the weights before
attempting to use it. Do not attempt to
adjust any of the mechanisms on the
underside of the kettlebell shell. Do not
attempt to manually adjust the weight
of the kettlebell shell.

The Kettlebell Connect™ is for indoor
use only. Avoid using it near water, or in
high humidity areas such as a sauna or
steam room.

Prior to cleaning, unplug the Kettlebell
Connect™. To clean the kettlebell shell,
use a dry or slightly damp cloth. Avoid
using detergents. Avoid water coming
in contact with the base, as it contains
sensitive electronics.

25

Satisfaction guarantee

JAXJOX® Kettlebell Connect™ (hereafter
referred to as the “Product”) for any
reason, you have 30 days from the date
of purchase to request a full refund.

To qualify for a refund, the following
conditions must be met:

• You must contact JAXJOX

®

within

30 days of your purchase date.

• You must return the Product to
JAXJOX

®

to receive a refund.
Returned Product(s) must be in
good physical condition (not broken
or damaged). All components
originally included with your
purchase must be included with
your return.

Shipping and handling charges, gift
wrap fees, and taxes paid (such
as state, customs, or VAT) are not
refundable. You are responsible for all
shipping charges and you assume the
risk of loss or damage to the returned
Product(s) while in transit back to
JAXJOX

®

.

26

Limited warranty

JAXJOX® warrants to the original
purchaser that your Kettlebell Connect™
(hereafter referred to as the “Product”)
shall be free from defects in materials
and workmanship under normal use for
a period of one (1) year from the date of
purchase.

If such a defect arises and a request
is received by JAXJOX

®

within the

applicable Warranty Period, JAXJOX

®

will, at its option and to the extent
permitted by law, either (1) repair
the Product at no charge, using new
or refurbished replacement parts
or (2) replace the Product with a
new or refurbished Product. In the
event of such a defect, to the extent
permitted by law, these are your sole
and exclusive remedies. Shipping and
handling charges may apply except
where prohibited by applicable law. This
Limited Product Warranty is valid only
in the jurisdictions where the Products
are sold by JAXJOX

®

itself or through
its authorized reseller or agent and
is valid to the extent permitted by the
applicable laws of such jurisdictions.
Any replacement Product will be
warranted for the remainder of the
original warranty period or thirty (30)
days, whichever is longer, or for any
additional period of time that may be
required by applicable law.

®

warrants to the original

®

within the

®

®

itself or through

27

How to obtain warranty
service

To be eligible for service under this
Limited Warranty you must contact
JAXJOX

®

. As may be required by

applicable law, JAXJOX

®

may require
you to furnish proof of purchase details
and/or comply with other requirements
before receiving warranty service.

Claims must be made within the

Questions or concerns

JAXJOX® stands behind the quality
of our products. We hope that our
beatifully designed, interconnected

your needs and get you where you want
to be. If you need assistance or are
experiencing issues with your product,
please contact us for help and answers.

For customer services enquiries:

[e-mail]

For general enquires:

[e-mail]

[phone]

(changes or modifications not expressly approved

by the party responsible for compliance could
void the user’s authority to operate the equipment)

28

Notices

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device must not cause
harmful interference, and (2) this device must
not accept any interference received, including
interfer- ence that may cause undesired
operation.

Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/
TV technician for help. This device meets
the FCC requirements for RF exposure in
public or uncontrolled environments.

Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Contact your local government or
a retailer for additional information.

Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help. This device meets
the FCC requirements for RF exposure in
public or uncontrolled environments.

© 2018 JAXJOX. All rights reserved.

www.jaxjox.com