Jawbone THE NERD User Manual

USER GUIDE JBD
CONTENTS JBD ANATOMY GET CONNECTED GET TALKING & MORE SAFETY INFORMATION
WATCH TUTORIAL VIDEOS AT JAWBONE.COM/ICON/VIDEOS
JBD ANATOMY IF THE LED IS . . .
QUICKLY FLASHING The JBD is trying to pair with your Jawbone.
SLOWLY FLASHING The JBD is paired with your Jawbone and ready for use.
GET CONNECTED 1 . 1 PREPARE YOUR JAWBONE 1 Press & hold the TALK BUTTON 2 Slide the POWER SWITCH on 3 Wait for the LED RING to fl ash red & white 4 Release the TALK BUTTON
1 . 2 CONNECT WITH YOUR COMPUTER 1 Prepare your Jawbone. See 1 .1 2 Plug Jawbone JBD into your computer 3 Press and hold the CONNECT button 4 Wait for the LED RING on your Jawbone ICON to display white and then disappear 5 Release the CONNECT button
1 . 3 CONNECT WITH YOUR PHONE 1 Prepare your Jawbone. See 1 .1 2 Turn on Bluetooth®
ON AN IPHONE®
Go to SETTINGS > GENERAL > and enable BLUETOOTH 8
ON A BLACKBERRY® Go to SETTINGS/OPTIONS > BLUETOOTH and enable BLUETOOTH OTHER CELL PHONES
Go to JAWBONE.COM/PAIRING or review the instruction manual that came with your phone.
3 Go to your phone’s Bluetooth® settings.
ADD OR SEARCH FOR DEVICES
When “Jawbone ICON” appears, select it.
IF ASKED FOR A PASSCODE
Enter “0000” This is a one-time event per phone. To pair your Jawbone headset to another phone, repeat steps
1.1 to 1.3.
GET TALKING & MORE 2 . 1 MAKE A CALL Use your computer to dial via Skype®, Google Talk (SM), and others. Listen and talk through your Jawbone ICON.
2 . 2 STREAM AUDIO Use your phone or computer to dial as usual. Listen and talk through your Jawbone.
2 . 3 ADJUST THE VOLUME Use the volume control on your phone or computer. Or, while on a call or listening to music, PRESS + HOLD the TALK BUTTON and the volume level will cycle up and down. When you find the most comfortable volume level, release the button and your volume will be set.
2 . 4 SWITCH BETWEEN AUDIO & CALLS (OR SIMULTANEOUS MULTIPOINT) Listen and talk on your computer while staying connected to your mobile phone. The audio from your computer will fade away when you answer or make a call on your mobile phone and resume when you hang up.
WARNING
Failure to follow these safety instructions could result in hearing damage or in fire, electric shock, or other injury or damage.
Avoiding Hearing Damage
Permanent hearing loss may occur if the Jawbone® headset is used at a high volume. Set the volume to a safe level. Even though you may become accustomed to a higher volume of sound, and even though it may sound normal, any higher volume of sound can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. The Jawbone® headset has been initially set at a medium volume for sound. Do not increase the level of volume unless you are in conditions where you need a higher level for a short period of time. If this level of volume is uncomfortably high for you, you should decrease this level. hearing e x perts suggest that to protect your hearing : 1 Limit the amount of time you use the Jawbone® headset including use at high volume. 2 Avoid turning up the volume to block out noisy surroundings.
Loading...
+ 3 hidden pages