Micro projector
User Manual
User Manual
User ManualUser Manual
BTS-H501
1. Power on: Plug power adaptor to power outlet, connect the other end of power
cable to H01 Micro Projector DC slot. Accordingly red light turns on indicating
the standby mode.
2. Start up: Press power button (PWR) at the tail side of the product, then green
light automatically switches on, device starting up to LED projecting image
takes about 3-5 seconds.
3. MP4 Function Start Up: H01 in standby mode, press PLAY button gently for
more than 3 seconds, blue light switching on means MP4 is started up and
ready for MP3 and MP4 display.
4. VIDEO Input: H01 recognizes DVD and standard A/V signal. The projection
display image will be automatically switched from MP4 to input VEDIO if any.
Connect to computer: connect H01 and computer with VGA cable, display
switches to computer screen automatically with correct operation on computer
side.
5. Volume: H01 offers digital volume control. For A/V input, volume control
buttons on left side is available to control volume. For MP4, left side button
plus H01 built-in software volume control both available to tune the volume.
6. Switch Off: To shut off H01, double press power button (PWR), MP4 shuts
down automatically, and fan stops in 30 seconds, meanwhile, red light flashing
indicates a shutting off mode. Unplug power cable for a complete shut down.
NOTE: During fan shutting down (red light flashing), reboot is not allowed. To
reboot during the said period, unplug and plug the power cable once then
reboot H01.
7. Auto Signal Detecting: H01 detects input signal automatically in standby mode..
Loading...