
1. Unpack your stacker
Ensure the following items are also included:
T-shaped tool Bolt Washer Wing-nut
2. Removing clear card cover cartridge from printer
A. Open card cartridge cover B. Carefully release cover pivots from printer
Store card cartridge cover for possible later use.
3. Making adjustments to printer
A B C D
Identify 2 small tabs within card feeding area.
Using the tool, bend BOTH tabs up and out as illustrated.
NB: Use tool to bend tabs to their original position if using the
card cartridge cover.
4. Fixing stacker to printer
Position stacker INSIDE the metal arms.
Feed long bolt through the holes.
Add washer and apply wing nut. Do not over-tighten.
tool
tabs
bent tabs

6. Applying weight
Position the tool on top of the card stack to serve as a weight
to assist the feeding of the last 30 (approx.) cards.
7. Loading cards during printing
To load cards during printing, feed a stack of about
50 cards through top of stacker.
Reposition tool (weight) onto top of cards.
To load a larger batch of cards, repeat section 5.
IMPORTANT: IF ANY CARDS REMAIN IN THE STACKER,
SLIDER MUST BE PUSHED IN
BEFORE ROTATING SUPPORT-ARM.
5. Loading cards
A. Push slider into printer.
While holding stacker, rotate
support-arm away from printer
and carefully drop stacker down.
C. Push cards into position and
close lid.
Slide lid catch to lock lid.
Lift stacker into its upright
position and rotate support-arm
to secure.
B. Slide open lid catch and open lid.
Load cards into stacker, ensuring
they lean forward, towards printer.
D. Pull slider out to its
FULLY EXTENDED position.
slider
support-arm
lid catch

CS/J420 - Oct. 2004
For Support in North and South America
NBS Technologies
70 Eisenhower Drive
Paramus
New Jersey
United States 07652
Tel: +1 201 845 7373
Fax: +1 201 845 4528
Email: ctctechsup@nbstech.com
Web: www.nbstech.com
For Support in Europe, Middle East, Africa and Asia Pacific
NBS Technologies
7 Byfleet Technical Centre
Canada Road
West Byfleet
Surrey KT14 7NB
United Kingdom
Tel: +44 1932 351531
Fax: +44 1932 351382
Email: technical.support@nbstech.com.