How it Works
Jaton
Loading...
VIDEO-PCX5750
User Manual
30 pgs832.86 Kb0

Jaton VIDEO-PCX5750 User Manual

Download
Video-PCX5750 series
nVIDIA GeForce™ PCX series
User’s Manual
Version 1.00
Copyright © 2004 Jaton Corporation, USA
Contents
á
WINDOWS® 2000 DRIVER INSTALLATION .............................. 11
á
WINDOWS® XP DRIVER INSTALLATION.................................. 14
H
OW TO OBTAIN WARRANTY SERVICE .......................................... 24
Introduction
Video-PCX5750 series video accelerators are nVIDIA GeForce™ PCX5750 core technology based 128MB/256MB DDR memory modules built-in onboard. nVIDIA unveils the GeForce PCX family of graphics processing units (GPUs): the industry’s first top-to-bottom family of PCI Express GPUs.
A PCI express is a new Intel PC bus architecture that doubles the bandwidth of the AGP 8X, delivering over 4GB per second in both upstream and downstream data transfers. The Video PCX GPUs will deliver better graphics and more vibrant digital media to PC consumers through the additional bandwidth and features offered by Intel’s new PCI Express bus architecture. Since the GPU has the largest bandwidth demand of all the PC subsystems.
The nVIDIA® GeForcePCX Graphics Processing Unit (GPU) is
0.13µ Micron Process Technology, which delivers high performance through faster clock rates. CineFX 2.0 engine produces gaming effects on par with the hottest motion pictures. Combined with 128-bit studio quality color processing technology, 3D worlds and characters are more real than
3
anything is that’s come before. Powered by the CineFX 2.0 engine, the Video PCX5750 series shifts the focus from simple pixel fill rate to sophisticated pixel shading. To maximize programming choice, the nVIDIA CineFX 2.0 engine includes the most complete hardware feature implementation for both OpenGL® and Microsoft® DirectX® environments, including total support for the DirectX 9.0-vertex and pixel shader specification.
Well-developed CineFX 2.0 engine features include the support of 1024 instructions in a single rendering pass, allowing for complex effects that aren’t practical in any other architecture. Complex lighting can dramatically improve the realism of images, but traditionally adds the rendering time.
The Intellisample process uses gamma-adjusted sampling, taking into account the dramatic physical differences between how your eyes and monitor perceive light and color, making for much smoother and more natural edge transitions.
As always, nVIDIA solution incorporate new technology and advances without compromising the overall stability and quality of the system, and nVIDIA Unified Driver Architecture (UDA) makes it painless to take advantage of new capabilities as they are introduced.
A matchless of hardware and software technology combination, the primary principles of Video-PCX5750 series video accelerators that will contribute many of new features and more benefits to your desktop computing as well as the best­performance integrated, unusual quality and exceedingly resolution.
Features and Specifications
Video-PCX5750 series
CineFX 2.0 Engine
Powers cinematic effects beyond imagination. With advanced vertex and pixel shader capabilities, stunning and complex special effects are possible. In addition, increased horsepower
4
delivers faster and smoother gameplay. The 2nd-generation CineFX 2.0 engine powers more advanced pixel shaders.
Intellisample Technology The industry’s fastest and highest quality antialiasing delivers ultra-realistic visuals, with no jagged edges, at lightning-fast speeds. Extends performance and quality gains to higher resolutions and antialiasing levels.
UltraShadow Technology
Advanced technology designed to enhance the performance of bleeding-edge games that use complex shadows.
High-Precision Graphics
By combining the incredible dynamic range of today's state-of­the-art 3D motion pictures with 128-bit studio-precision color, the Video-PCX5750 series bring you the industry’s best image quality for the most demanding applications.
Unified Driver Architecture (UDA)
Part of the NVIDIA Forceware unified software environment (USE). The NVIDIA UDA guarantees forward and backward compatibility with software drivers. Simplifies upgrading to a new NVIDIA product because all NVIDIA products work with the same driver software.
nView Multi-Display Technology
The nView hardware and software technology combination delivers maximum flexibility for multi-display options, and provides unprecedented end-user control of the desktop experience. Video-PCX series are enabled to support multi­display.
Digital Vibrance Control (DVC)
Allows the user to adjust color controls digitally to compensate for the lighting conditions of their workspace, in order to achieve accurate, bright colors in all conditions.
PCI Express Support
PCI Express is a new Intel bus architecture that doubles the
5
bandwidth of the AGP 8X bus, delivering over 4 GB per second in both upstream and downstream data transfers. Supported in the Video-PCX series.
Advanced Pixel Shaders
New technology allows floating-point shader operation to run 2x faster than previous-generation GPUs.
Microsoft® DirectX® 9.0 Optimizations and Support Ensures the best performance and application compatibility for all DirectX 9 applications.
OpenGL® 1.5 Optimizations and Support Ensures the best performance and application compatibility for all OpenGL applications.
400MHz RAMDACs Industry’s fastest RAMDACs support QXGA displays with ultra­high, ergonomic refresh rates.
DVI Support Drives the new generation of desktop digital flat panel displays and projectors.
Integrated TV Encoder Provides best-of-class TV-out functionality for resolutions up to 1024x768.
Integrated Full Hardware MPEG-2 Decoder Delivers full-frame, full-screen MPEG-2 video on your desktop.
Integrated Full Hardware MPEG-2 Decoder Delivers full-frame, full-screen MPEG-2 video on your desktop.
64-phase Video Scaler Highest quality for scaling DVD and other video to full-screen HDTV resolutions.
0.13 Micron Process Technology Delivers high performance through faster clock rates.
6
Architected for Advanced Shading Languages Ensures that the newest, cutting-edge special effects in applications will run flawlessly. Speeds up content creation so game developers can get their new games out to PC users faster than ever before.
Overall Performance
• up to 1.7 billion texels per second fill rate
• up to 8.8 GB/sec. Memory Bandwidth
• up to 319 million vertical per second fill rate
• 4 Pixels/Clock Rendering Pipeline
Compatibility
• NVIDIA Unified Driver Architecture (UDA)
• Fully compliant with OpenGL 1.5
• Microsoft DirectX 9.0
• WHQL-certified for Windows XP, Windows 2000
Operating System
• Windows® 2000 and Windows® XP
System Requirement
• Intel Pentium® P4 or compatible system with PCI Express 16X Slot
• CD-ROM drive, Quad speed or faster
• Hard Drive with at least 100MB Free space
• MS Windows® 2000/XP operating system
Check List
• Video-PCX5750 or Video-PCX 5750-256 Multimedia Accelerator
• 3” cable convert TV-Out from MD 4pin to Composite RCA
• DVI to RGB converter
• Software & Documents CD
7
• Quick Start Guide (Printed)
Hardware Description
Width
Display Memory
nVIDIA
GdForce
Height
DVI-I 24Pin ( DVI out )
MD 4Pin ( TV out )
DB15 VGA ( RGB out )
Bracket
Product name / PCB version Core Chipset PCB Size Memory Size
Video-PCX5750 82298A nVIDIA GeForce FX5750 W=6.6" X H=4.37" 8M*16 x 8 DDR TSOP II 128MB
Video-PCX 5750-256 82298A nVIDIA GeForce FX5750 W =6.6" X H=4.37" 16M*16 x 8 DDR TSOP II 256MB
8
Display Devices Output
Quad Output Optional
1. RGB out
2. TVout
3. DVI out
4. DVI convert to RGB (Dual RGB)
LCD Display Panel
TV set
3
2
2
1
CRT Monitor
Convert Cable
Composite RCA
S_Video TVout
DVI to RGB Converter
4
DVI out Connector
MD-4PIN Connector
DB 15 VGA Connector
AGP Plate
CRT Monitor
1. RGB out - DB15 VGA connector to analog monitor.
2. TV-Out - MD4 connector converts S-Video to RCA Composite Output, or direct connects S-Video to TV set.
3. DVI out - DVI connects to LCD display panel.
4. DVI converts to RGB with DVI-RGB converter for Dual RGB out.
9
Hardware Installation
Installation Procedures
!! WARNING !!
Discharge static electricity by
touching the GROUND such
as metal part of your case
connected with good power
ground before you handle the
electronic circuit boards.
The manufacturer assumes no liability for any damage, caused directly or indirectly, by improper installation of any components by unauthorized service personnel. If you do not feel comfortable performing the installation, consult with a qualified computer technician
Steps:
1. Turn OFF all powers to your system, including any peripherals (printer,
external drives, modem, etc.).
2. Disconnect the power cord and the monitor cable from the back of the
computer.
3. Unfasten the cover mounting screws on your system and remove the
system cover. Refer to your system user manual for instructions to determine the location of the mounting screws.
4. Remove the retaining screw that holds the slot cover in place. Slide
the slot cover out and put the screw aside (you will need it to secure the adapter).
5. To install the adapter in AGP expansion slot, carefully line up the gold-
fingered edge connector on the adapter directly above the expansion slot connector on the motherboard. Then press the adapter into place, completely. Use the (remaining) screw you removed to secure the adapter-retaining bracket in place.
6. Replace the computer cover. Secure the cover with the mounting
screws you removed in Step 3.
You have now completed the installation of your new graphics adapter on your system.
.
10
Upgrade Steps:
Add or change your video adapter to an existing system, you may precede a few steps before you install the new hardware and software (video display driver). The followings are some of the considerations:
1. To add a new adapter, ensure the mainboard has available IRQ for new devices, and there is no conflict between each other.
2. If you try adding this video adapter to an ALL-IN-ONE mainboard (which video port built-in already), then you have to disable that port first. Otherwise, that will be a problem for the new video adapter setup.
3. The driver installation for system upgrade is the same as below, if error occurs when you proceed to step 1, 2 or 3, please consult with your system dealer or the existing hardware manufacturer support.
Software Installation
á Windows
Upgrade video adapter to an existing system. (Windows has been pre-loaded)
1. Select [Next] at Found New Hardware Wizard.
2. Check [Search for a suitable driver for my device (recommended)] then select [Next].
3. Insert the Software’s CD.
4. Check [Specify a location:]
5. Under [Copy manufacturer’s files from:] enter D:\WIN2K&XP, where D is your CD_ROM drive. Then click on [OK].
6. Select [Next] to install
®
2000 Driver Installation
“Nvidia GeForce FX 5700” driver.
11
7. Select [Finish] to restart the computer.
InstallShield® Program:
Microsoft Windows®2000 detects this new hardware and places appropriate display driver from its system folder automatically - it doesn’t matter if you have added a new driver or changed the existing one. To maximize the video board acceleration and increase its performance, you may install the manufacturer’s display driver as follows:
1.
Autorun feature brings-up the “Welcome Screen”, and you may point to “Display Driver” and then press on it.
12
Microsoft InstallShield® Wizard has start loading its setup process;
2.
please wait until it has completed.
3.
Click on “Next” to continue the process.
13
4.
Click on “Finish” to restart your computer, the new display driver will be in place after Windows boots-up.
á Windows
Upgrade video adapter to an existing system. (Windows has been pre-loaded)
1. Select [Next] at Found New Hardware Wizard.
2. Check [Search for a suitable driver for my device (recommended)] then select [Next].
3. Insert the Software’s CD.
4. Check [Specify a location:]
5. Under [Copy manufacturer’s files from:] enter D:\WIN2K&XP, where D is your CD_ROM drive. Then click on [OK].
6. Select [Next] to install
7. Select [Finish] to restart the computer.
®
XP Driver Installation
“Nvidia GeForce FX 5700” driver.
14
InstallShield® Program:
Microsoft Windows® XP detects this new hardware and places appropriate display driver from its system folder automatically - it doesn’t matter if you have added a new driver or changed the existing one. To maximize the video board acceleration and increase its performance, you may install the manufacturer’s display driver as follows:
1.
Autorun feature brings-up the “Welcome Screen”, and you may point to “Display Driver” and then press on it.
15
2.
Microsoft InstallShield® Wizard has start loading its setup process; please wait until it has completed.
3.
Click on “Next” to continue the process.
The Windows system will copy all driver files from source media to
4.
your local hard disk; please wait until the process has completed.
16
5.
Click on “Finish” to restart your computer, the new display driver will be in place after Windows boots-up.
Notice:
We believe that the all the installation steps mentioned above are clear from manufacturer software’s CD to your operating system. Any procedures other than these processes have not been specified.
Technical Assistance
Q: Why is the display shifted or changed sizes when I switch display modes?
Explain and Suggestion:
Some monitors lack auto-sizing features or just do not synchronize properly to the video board output. In some cases, horizontal and vertical display adjustments may be necessary. Use the monitor control panel functions to adjust screen.
In other cases, mode type and refresh rate adjustments may be necessary. Use the utility program, which provided by video card manufacturer or production developer. To center the display with normal type (mode 3), and to reduce (decrease) the refresh rate with the monitor's specification.
17
Q: What kind monitors can display 800x600 modes or higher resolution mode?
Explain and Suggestion:
To display 800x600 resolution at 60Hz refresh rate, the monitor must be capable of synchronizing a 31.5KHz horizontal scan rate (e.g., NEC 2A, 3D). At 72Hz refresh rate, the monitor must be capable of synchronizing a 48.0KHz scan rate (e.g., Sony HG 1304, NEC 4D, 5D, Seiko 1450).
To display 1024x768 interlaced mode; the monitor must be capable of synchronizing a 35.5KHz horizontal scan rate (e.g., NEC 3D, Seiko 1430 or
1440). To display 1024x768 non-interlaced mode at 60Hz, the monitor must be
capable of synchronizing a 48.7KHz scan rate (e.g., Sony HG 1304, NEC 4D, 5D, Seiko 1450).
To display 1024x768 non-interlaced mode at 70Hz, the monitor must be capable of synchronizing a 56.4KHz scan rate (e.g., NEC 4D).
Q: System hangs-up after installing video driver.
Explain and Suggestion:
Today, most video drivers are developed for 32-bit processing and may require a channel to Code/Decode. Conflict between device drivers and TSR (terminate­and-stay-resident) programs will inverted the display, and are particularly effectual at crashing computer. The most effective way to check for conflicts is to replace with the original video driver, or delete and re-install the current video driver to the system.
Accomplishing IRQs (Interrupt Request Query) settings or troubleshooting the conflicts on hardware source may necessary. Most AGP video cards designed for Plug-n-Play, that means video card IRQ's setup which controls by main board’s (motherboard) circuitry and BIOS. Physically pulling out other devices from system, and re-starts the computer. Confirm and modify your IRQ addresses with qualified computer technician.
Q: Multiple images or unreadable screen after loading video driver.
Explain and Suggestion:
There are a variety of reasons why the display might be distorted. One common reason is a monitor mis-match. Some older multi-frequency monitors are unable to switch video modes without being turned off, then turned on again.
If the problem occurring in windows, make sure that you have loaded that proper video driver, and that the driver is compatible with the monitor being used. Try re­configuring your application software to use a compatible video mode. If problem persist in windows, load the standard generic VGA driver. The generic VGA driver should function properly with virtually every video board and VGA (or SVGA) monitor available.
If that is an unsatisfactory solution, you may have to upgrade to a monitor that supports the desired video mode.
18
Some new monitors are also synchronizing this problem because built-in DDC (Data-Digital-Channel) feature. Sometime that DDC automatically setup the display frequency without loading video driver. Try to turn it off, or change settings of monitor type in your system.
Q: Selection of color, resolution and refresh rate combination that always backs to default after restart the system.
Explain and Suggestion:
Accordingly, there must be a bug (defected source-code) in video driver, or in the system. Debug the source-code or fix the error in video driver that should be done by the driver developer. Likewise, upgrade the video driver from the manufacturer or from the original software developer is necessary.
Frequently Asked Questions (FAQ)
Q1 Why do we need 3D graphics capability in our PC?
Answer
3D technology is becoming increasingly important (and common) not only in games, but also in other applications such as VRML, which allows 3D scene descriptions in Web applications. 3D technology is used for image editing, modeling, and an increasing number of in home and business applications. In games, as well as other applications, 3D acceleration not only allows better visual qualities and more realistic scenery attributes than software alone, but it also allows a higher frame rate, which translates into a more interactive experience for the end user.
Q2 What does “Rendering Engine” mean?
Answer
“Rendering Engine” generically applies to the part of the graphics engine that draws 3D primitives, usually triangles. In most implementations, the rendering engine is responsible for interpolation of edges and "filling in" the triangle.
Q3 What does the set-up engine do in a graphics controller?
Answer
A set-up engine allows drivers to pass triangles in the form of raw vertex information; whereas, most common designs force triangles to be pre-processed for the rendering engine in terms of delta values for edges, color, and texture.
Q4 Why does a 3D graphics chip need to have both a rendering engine and a setup engine?
19
Answer
Any “3D application”, a game, VRML, or modeling package, can benefit from 3D rendering. This is especially true of an application that uses texturing extensively, because texturing and texture filtering are very intensive operations at the pixel level in terms of CPU operations and demands for memory bandwidth. Without a set-up engine in a graphics controller, the CPU has to calculate the delta values for edges, color, and textures; the drivers need to handle ten (10) times more extensive data. This results in slower 3D pipeline operations between the CPU and the graphics controller.
Q5 If we use powerful CPUs, such as a Pentium™ 200, can a standard 2D graphics card achieve 3D performance?
Answer
Yes and no. Software rendering can take advantage of "tricks" learned by force of necessity through years of trial and error. With such stratagems, the speed of software rendering for simple scenes can approach that of low-level hardware 3D rendering. On the other hand, as scenes become more complex (or frame sizes become larger), there are conflicts between using the CPU for high-level game logic, geometry, lighting, and rendering, all of which increase their demands. No current CPU or system can perform advanced quality-enhancements (bilinear filtering and alpha blending) in real time. Even general case texture mapping with RGB lighting is too much for the current CPU generation.
Q6 What does "software 3D" mean?
Answer
Software 3D is generally used to mean using non-specific (2D) hardware in conjunction with the CPU to render for 3D applications. Some of these techniques allow usable 3D applications when high-powered and/or MMX™­equipped CPU's are employed along with special-case software optimization techniques. As stated above, SW 3D can achieve credible results with today's (software optimized) applications, but the rising popularity of good 3D hardware at the consumer price level is inexorably compelling the public to expect hardware level scene enhancements and frame rates.
Q7 What is “SGRAM”?
Answer
Synchronous Graphics Random Access Memory (SGRAM) is a new and improved type of memory, custom-designed for graphics use.
Q8 What is the advantage of as compared to ordinary DRAM?
Answer
20
This type of memory is now capable of running at much higher speeds than Fast Page Mode or EDO DRAM. Also, it is able to execute a small number of frequently executed operations, such as buffer clears, specific to graphics applications, independently of the controller.
Pinout and Sync Frequencies
Analog Color Display Pinouts (DB 15)
PIN FUNCTION
1
Red Video1
2
Green Video1
3
Blue Video1 4 Not Used 5 Ground 6 Red Return (ground) 7 Green Return (ground) 8 Blue Return (ground) 9 Vcc (+5v DDC Power)
10 Sync Return (ground) 11 Monitor ID (not used) 12 SDA (DDC support) 13 Horizontal Sync 14 Vertical Sync 15 SCL (DDC support)
Note: Analog monochrome type monitors use green video for all video input
and ignore red and blue video.
Conversion Table: Pin Adapters
If you will be using a 9-to-15-pin adapter cable to link your 9-pin monitor connector to the 15-pin accelerator card connector, check Table carefully before you install the cable. The 9-to-15 pin adapter cables are available from a variety of sources, but they need to match the specifications in Table to work properly with your new card.
21
The adapter cable requires a D-shaped 9 pin female connector and a D-shaped 15 pin male connector.
9-to-15 Pin Conversion Table
9 PIN SIGNALS PIN NO. 15 PIN SIGNALS PIN NO.
Red 1 Red 1
Green 2 Green 2
Blue 3 Blue 3
Horz Sync 4 Horz Sync 13
Vert Sync 5 Vert Sync 14
Red Ground 6 Return Red 6
Green Ground 7 Return Green 7
Blue Ground 8 Return Blue 8
Sync Ground 9 Digital Ground 10
Analog Video Signals
Black Level = 0 V
Full Intensity (White) Level = +0.7 V
Ground 5
Digital Visual Interface (DVI-I) Connector
1 8 C1 C2
17 24 C3 C4
24 pin DVI FEMALE connector built-in onboard.
Pin Number Signals
1 TMDS Data 2 -
2 TMDS Data 2 +
3 TMDS Data 2 Shield
4 No Connection
5 No Connection
6 DDC Clock
22
7 DDC Data
8 No Connection
9 TMDS Data 1 -
10 TMDS Data 1 +
11 TMDS Data 1 Shield
12 No Connection
13 No Connection
14 +5 V Power
15 Ground (for +5 V)
16 Hot Plug Detect
17 TMDS Data 0 -
18 TMDS Data 0 +
19 TMDS Data 0 Shield
20 No Connection
21 No Connection
22 TMDS Clock Shield
23 TMDS Clock +
24 TMDS Clock <
Technical Support
In the event you have a technical problem with this product, please read the README files in the software CD_ROM. Updated drivers are available through Jaton Web site. Have following information handy when you contact technical support:
; Name of the product. ; Software Driver and Version. ; System Information, such as CPU speed, BIOS version, Monitor
Specification, etc.
; Description of the problems including any error messages.
Telephone:
FAX:
(408) 934-9369 9-5 PST Mon. - Fri.
(408) 942-6699
23
email:
vgasupport@jaton.com
Website:
www.jaton.com
How to Obtain Warranty Service
In the worldwide contact:
www.jaton.com
In United States contact:
Jaton Corporation.
Service Center
556 S. Milpitas Blvd.,
Milpitas, CA 95035
(408)-934-9369
In Europe contact:
Jaton Europe B.V.
Overwegwachter 3, 3034 G,
Potterdam, Netherlands (Holland)
31-10-412-1154
In Thailand contact:
Jaton (Thailand) Co., Ltd.
93, 93/1-2 Moo 4 Thana City PC Tower 1 KM.14
Bangchalong Bangplee Samutprakarn 10540
Thailand
Tel: 662-336-1212
Fax: 662-336-1213
st
Fl. Bangna-Trad
24
Tech Support: 662-336-0818
In Taiwan contact:
In Australia contact:
Jaton Technology pty, Ltd.
Unit 8, 41-49 Norcal Road,
Nunawading, Vic 3131 Australia
Tel: (Mel) 03 9873 3999 (Syd) 02 9476 8781
Fax 03 9873 3933
FCC SHIELDED CABLE WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
“SHIELD INTERFERENCE CABLE (S) MUST BE USED ACCORDING TO FCC 15.27©.”
CAUTION:
Changes or modifications not expressly approved by the Manufacturer could void your authority to operate this equipment in accordance with FCC rules and regulations.
SOFTWARE LICENSE AGREEMENT:
25
The Company grants the customer a non-exclusive, non-transferable license to use the software in this package for internal use on a single computer system. No other license of any kind is granted to any part of the product or any of the intellectual property therein.
TRADEMARK AND COPYRIGHT:
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing used only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
All Trademarks and Registered Trademarks belong to respective owners.
Copyright
© 2004 Jaton Corporation. All rights reserved.
Limited Warranty
Manufacturer warrants that the products sold hereunder are free from defects in material and workmanship for a period of two (2) years from manufacturing date. This limited warranty applies only to the original purchaser of Jaton Product and is not transferable. This limited warranty does not apply if failure to the Product Registration, or over thirty (30) days from purchase (original invoice date). This Limited Warranty does not cover any incompatibilities due to the user’s computer, hardware, software or any related system configuration in which the Jaton Products interfaces. Proof of purchase will be requiring before any consideration by Manufacturer occurs.
Other Limits
The forgoing is in lieu of all other warranties, expressed or implied. Including but not limited to the implied warranties
26
of merchantability and fitness for a particular purpose.
Manufacturer does not warrant against damages or defects arising out of improper or abnormal use of handling of the products; against defects or damages arising from improper installation (where installation is by persons other than Manufacturer), against defects in products or components not manufactured or installed by Manufacturer, or against damages result from non-manufacturer made products or components. This warranty does not apply if accident, abuse, nor misuse has damaged the Product. This warranty also does not apply to products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Manufacturer.
Exclusive Obligation
This warranty is exclusive. The sole and exclusive obligation of Manufacturer shall repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the Products or any part thereof, whether based on contract, tort, and strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, Manufacturer shall not be liable for incidental, special, or consequential damage.
Other Statements
Manufacturer’s employees or representatives’ ORAL OR OTHER WRITTEN STATEMENTS DO NOT CONSTITUE WARRANTIES, shall not be relied upon by Buyer, and is not a
part of the contract for sale or this Limited Warranty.
Terms and Conditions
Direct Jaton Customer: This warranty applies only for a
period of two (2) years from purchase date of Jaton original invoice.
27
Reseller/ Vendor: This warranty applies only for a
period of two (2) years from manufacturing date.
Registered User: This warranty applies only for a
period of two (2) years from purchase date and register within 30 days of purchase date from legal reseller.
Others: If the products do not conform to this
Limited Warranty (as herein above described), Manufacturer should charge services such as repair, replacement whether based on its costs. Shipping and installation of the replacement Products or replacement parts shall be at User’s expanse.
Services agreement:
(1) All applicants shall complete service request form from
Manufacturer.
(2) All returned checks will be charged a $20.00 fee by
Manufacturer.
(3) All repair and replacement services allow 4-6 weeks from
the date of receiving by Manufacturer.
(4) All products without warranties require service processing
fee $20 (payment in advance), which is not refundable.
Entire Obligation
This Limited Warranty states the entire obligation of Manufacturer with respect to the Products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in force and effect. Some states do not
28
allow limitation of implied warranties, or exclusive or limitation on product incidental or consequential damages, so above limitation may not apply to you. This warranty gives you specific legal rights. You may have other rights, which may vary from state to state.
This warranty applies only to this product, and is governed by the law of the State of California.
Reducing Warranty Claim Rejections
To reduce the potential of incurring damages not covered by Manufacturers warranties, we strongly recommend the following:
• Read your manuals before installing peripherals and/or before making changes to the machine’s configuration;
• Ask your dealer if there are any known problems with the system requirements or installation procedures for any add-on products that your are purchasing;
• Buy industry standard products where compatibility issue are more likely to surface;
• If you are unsure about installation for a new product, contact your dealer’s service department.
We believe it is important for you to know and understand what your warranty coverage provides and what it does not.
We also want you to be aware that most hardware warranties only relate to the function of the hardware. In most cases, no assurances are given by the manufacturer that the hardware item will work in conjunction with any other hardware item. If a computer product is not working because it is not compatible with another product, or because it has not been properly installed and set-up, the manufacturer does not pay for the
29
service time. To help avoid these inconveniences, contact a professional consultant that one can help you determine the possibility of incompatibility issue before you purchase add-on or accessories.
Warranty Service Use Only
Serial Number - ten or eleven digit code, the serial number consists of the following parts:
Packaging Type Manufactured Date Code Production Numerical Code
A 00 8 000015
Year Month
XXXXX-XXX-XX S/N: A008000015
XXXX XX XXXXXX00.0xxxx/xxxx
Product Label and Manufactured Date Code
30
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use