Jastec JTBT2200 User Manual
von-STD(JTBT2200) Manual Instruction
von-STD(JTBT2200) Information
1
• Certified Business Name: Jastec Co.,Ltd.
• Device (model): Wireless data communication system wireless transmitter(JTBT2200)
• Manufactured date: April, 2012
• Manufacturer/country : Jastec Co,Ltd./Korea
• Certified code : JS0
• A radio interference of this wireless module is not providing a service related the safety
of life.
Cautions For Safety
We kindly recommend you to be fully aware of using a product accurately and for safety of user. All liabilities by
uncomplying cautions are not supposed to be responsible to manufacturer.
1. This product into water or prolonged exposure to moisture can cause failure resulting in no charge for broken A/S.
2. Do not disassemble or repair this product if the label seal is broken or damaged, free A/S will not be received.
3. Do not separate or equip OBD II module while driving vehicle or ignition off. – This causes to car accident and defective of it.
4. Please note that on the surface of the product carefully to avoid strong detergent or chemicals.
5. This product works under the proper temperature -30~+80℃.
6. Do not impact the product. It’s the cause of product defective.
7. Using other products rated voltage is the cause of the crush. Rated voltage state must be sure to use the product.
8. After parking vehicle in a safe place, install OBD II module then drive.
9. When installing or removing product on the vehicle as the vehicle peripheral device could be due to injury, Please be careful.
10. Incorrect installation of the product by the vehicle’s shock and vibration and can cause data loss, after the installation, please check
it properly.
11. Products by shock or vibration of the vehicle is released from the car because it can cause data loss if the installation status checks
on a regular basis. This product is equipped with a breakdown of the car by the impact of accidents, damage, of driving record, we
are not responsible for missing.
12. Jastec Co.,Ltd provides cable, please use the original cable.
2
1. von-STD(JTBT2200) Descriptions
1.1 Overview
von-STD(JTBT2200) as vehicle driving logs tracker designed to collect a vehicle driving information from ECU(Electronic Control Unit)
By OBD standard protocol communication and can be saved a driving logs by connecting to PC.
3
In-vehicle Protocol
ISO 9141-2, ISO 14230-4(KWP-2000), ISO15765-4(CAN) J1850(PVM/VPW) protocol supported,
physical communication standard followed and high credibility being with vehicle DB.
32 bit main processor
Boasting fast and stable performance ARMv7 Cortex-M3 CPU has adopted.
Stability real-time operating system
System,hardware,applications,databases,data communications and other resources efficiently and
reliably manages the real-time operating system is used based on Tiny.
USB communication
USB Full-Speed (12Mbps) high data transmitter function supported.
Low power consumption and saving
Standby power consumption in driving conditions with low start-off when the vehicle’s powersaving features built in to prevent battery discharge.
Firmware update support
Firmware and vehicle DB program to communicate with a PC via USB connection to upgrade is
easy and fast..
Mass storage space
Large amounts of information and operating data in real time on a high-capacity memory and
high data reliability by applying non-volatile memory can be saved.
Data communication
High-speed communications, the processor transfer, processing speed and large memory capacity
by combining features such as vehicle driving record data in real time and to minimize the error.
Smart design
Due to small and light for easy installation and occupies less space, it doesn’t interfere with the
operation easier you can determine.
1. von-STD(JTBT2200) Descriptions
1.2 Specifications
4
Loading...