BT REMOTE CONTROL
User’s Guide
Version 1.0
Page 1 of 6
Table Of Contents
Using the Remote Control ------------------------------------ 3
Batteries --------------------------------------------------------- 4
Compliance statement ----------------------------------------- 5
Page 2 of 6
Using the Remote Control
You use the URC Remote Control to control your AV appliance.
First time to use:
After insert the fresh batteries into the battery compartment, long press and hold the
“OK” button until listen “beep, beep” sound, then release the OK button, the remote
start the Bluetooth® pairing mode.
Page 3 of 6
Batteries
JASCO BT URC REMOTE CONTROL uses two 1,5V AAA batteries. Only use high
quality batteries. Insert the batteries according to the markings for plus and minus
terminals under the cover at the Bottom of the Front.
Page 4 of 6
Technical Specifications
Model No.
GE 42192
Philips SRP2017B
Bluetooth Version
BLE 4.2, Class 2 device
Frequency band/Output Power
2.4GHz ~ 2.4835GHz / ≦0dBm
RF Operating Distance
Up to 30meters outdoor line of sight, in
unobstructed environment
Power input
Powered by AAA x 2pcs
Alkaline batteries are recommended for the
unit.
Operating and Storage Temp.
Operating: -10°C ~ 40°C
Storage: -10°C ~ 50°C
Dimension (L x W x T)
190mm x 49mm x 28mm
Weight
87.8g (not included batteries)
Maintenance
1. Do not expose your unit to dust, strong sunlight, humidity, high temperatures or
mechanical shocks.
2. Use new batteries of the recommended type and size only.
3. Do not use old and new batteries together as old batteries tend to leak.
4. To avoid chemical leaks, remove batteries from the unit if you do not intend to
use the unit for an extended period of time.
5. Do not use corrosive or abrasive cleansers on your unit.
6. Use a wet water cloth to clean the soft plastic surface, do not use any detergent or
cleaning agent.
7. Keep the unit dust free by wiping it with a soft, dry cloth.
8. Do not disassemble the unit, it contains no user-serviceable parts.
Warnings
Do not modify the unit in any way.
Risk of fire.
Risk of electrical shock.
Risk of burns.
Do not dispose of electrical appliances and unsorted municipal waste. Use separate
collection facilities. Contact your local government for information regarding the
collection systems available.
There are no user serviceable parts in this unit.
Caution
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Page 5 of 6
Printed in China
Compliance Statement
Trademark
“The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Jasco Product Company, LLC, is under license. Other trademarks
and trade names are those of their respective owners.”
JASCO Products Company LLC
10 E. Memorial Road,
Oklahoma City, OK 73114.
Visit www.jascoproducts.com
Page 6 of 6
SRP2017B/27
V1 6/2019
FCC Statement
Suppliers Declaration of Conformity | Model #: SRP2017B/27
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modications to this equipment.
Such modications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ICES-3(B)/NMB-3(B)
MADE IN CHINA
Philips and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license. This product has
been manufactured by and is sold under the responsibility of
Jasco Products Company, and Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114 is the warrantor in
relation to this product.
This product comes with a limited-lifetime warranty.
Visit www.philips.com/support for warranty details.
Questions? Contact our US-based Consumer Care Center
at 1-844-816-0320 between 7AM—8PM CST.
SRP2017B/27
V1 6/2019
Declaración de la FCC
Declaración de conformidad del proveedor | Model #: SRP2017B/27
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
Este dispositivo cumple con las Especicaciones del apartado 15 de las
normas de la FCC y con las especicaciones de las normas radioeléctricas
(RSS) del Ministerio de Industria de Canadá aplicables a aparatos
exentos de licencia. El funcionamiento está sujeto a las siguientes
dos condiciones: (1) este dispositivo no debe provocar interferencia
perjudicial, y (2) este dispositivo debe aceptar toda interferencia que
reciba, incluso la que pudiera causar un funcionamiento no deseado.
NOTA DE LA FCC: El fabricante no se hace responsable de ninguna
interferencia de radio o TV ocasionada por modicaciones no autorizadas
efectuadas a este equipo. Dichas modicaciones podrían anular la
autoridad del usuario para utilizar el equipo.
NOTA: Este equipo ha sido probado y cumple con los límites para
aparatos digitales de Clase B, de conformidad con el apartado 15
de l as normas de la FCC. Estos límites están diseñados para proveer
protección razonable contra interferencias perjudiciales en una
instalación residencial. Este equipo genera, usa y puede irradiar energía
de radiofrecuencias y, si no se instala y usa según las instrucciones,
puede provocar interferencia perjudicial a las radiocomunicaciones.
No obstante, no hay garantías de que no ocurrirá interferencia en una
instalación en particular. Si este equipo provoca interferencia perjudicial
a la recepción de radio o televisión, lo que puede determinarse
encendiendo y apagando el equipo, se recomienda que el usuario intente
corregir la interferencia por medio de la implementación de una o más de
las siguientes medidas:
— Reorientar o reubicar la antena receptora.
— Incrementar la separación entre el equipo y el receptor.
— Conectar el equipo a un tomacorriente de un circuito diferente del
circuito al que está conectado el receptor.
— Consultar al distribuidor
ICES-3(B)/NMB-3(B)
HECHO EN CHINA
Philips y el emblema de escudo Philips son marcas registradas de
Koninklijke Philips N.V. y se usan bajo licencia. Este producto ha sido
fabricado y se comercializa bajo responsabilidad de Jasco Products
Company y Jasco Products Company LLC, 10 E. Memorial Rd.,
Oklahoma City, OK 73114, es el garante en relación a este producto.
Este producto tiene una garantía de 90 días.
Visite www.philips.com/support para conocer los
detalles de la garantía.
¿Tiene preguntas? Comuníquese al 1-844-816-0320 entre
las 7:00 a. m. y las 8:00 p. m. CST (hora central estándar).
42192
V1 6/2019
FCC Statement
Suppliers Declaration of Conformity | Model #: 42192
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ICES-3(B)/NMB-3(B)
MADE IN CHINA
GE is a trademark of General Electric Company and is under license by Jasco
Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114
This product comes with a limited-lifetime warranty. Visit www.byjasco.com
for warranty details.
Questions? Contact our US-based Consumer Care Center
at 1-844-816-0320 between 7AM—8PM CST.
42192
V1 6/2019
Declaración de la FCC
Declaración de conformidad del proveedor | Model #: 42192
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
Este dispositivo cumple con las Especificaciones del apartado 15 de las
normas de la FCC y con las especificaciones de las normas radioeléctricas
(RSS) del Ministerio de Industria de Canadá aplicables a aparatos exentos
de licencia. El funcionamiento está sujeto a las siguientes dos condiciones:
(1) este dispositivo no debe provocar interferencia perjudicial, y (2) este
dispositivo debe aceptar toda interferencia que reciba, incluso la que pudiera
causar un funcionamiento no deseado.
NOTA DE LA FCC: El fabricante no se hace responsable de ninguna
interferencia de radio o TV ocasionada por modificaciones no autorizadas
efectuadas a este equipo. Dichas modificaciones podrían anular la autoridad
del usuario para utilizar el equipo.
NOTA: Este equipo ha sido probado y cumple con los límites para aparatos
digitales de Clase B, de conformidad con el apartado 15 de las normas de
la FCC. Estos límites están diseñados para proveer protección razonable
contra interferencias perjudiciales en una instalación residencial. Este equipo
genera, usa y puede irradiar energía de radiofrecuencias y, si no se instala
y usa según las instrucciones, puede provocar interferencia perjudicial a
las radiocomunicaciones. No obstante, no hay garantías de que no ocurrirá
interferencia en una instalación en particular. Si este equipo provoca
interferencia perjudicial a la recepción de radio o televisión, lo que puede
determinarse encendiendo y apagando el equipo, se recomienda que el
usuario intente corregir la interferencia por medio de la implementación de
una o más de las siguientes medidas:
— Reorientar o reubicar la antena receptora.
— Incrementar la separación entre el equipo y el receptor.
— Conectar el equipo a un tomacorriente de un circuito diferente del
circuito al que está conectado el receptor.
— Consultar al distribuidor
ICES-3(B)/NMB-3(B)
HECHO EN CHINA
GE es una marca comercial de General Electric Company con
licencia otorgada a Jasco Products Company LLC, 10 E. Memorial Rd.,
Oklahoma City, OK 73114.
Este producto de Jasco tiene una garantía de por vida limitada. Visite www.
byjasco.com para conocer los detalles de la garantía.
¿Tiene preguntas? Comuníquese al 1-844-816-0320 entre
las 7:00 a. m. y las 8:00 p. m. CST (hora central estándar).
Loading...