Jasco RM25001 User Manual
RM25001
Universal Remote
Instruction Manual
IntroductionTable of Contents
Introduction ...................................................... 3
Button Functions ............................................... 4
INPUT ........................................................ 6
Setup ............................................................... 6
Battery Installation ....................................... 6
Battery Saver ............................................... 7
Code Saver ................................................. 7
Power-On default ........................................ 7
Code Setup ................................................. 7
Code Entry ....................................................... 8
Direct Code Entry ........................................ 8
Code Search ............................................... 8
Code Identification Feature ............................... 9
Programming Combo Device Codes ............... 10
Controlling Combo Devices ............................ 10
Controlling Devices with Power On and Off .... 10
VCR/DVD/DVR Punch-Through Feature ....... 11
Volume/Mute Control Feature ......................... 11
Setting Volume/Mute Control, Punch-Through . 12
Setting any Mode to use its own Volume/Mute 12
Sleep Timer .................................................... 13
Code Learning ................................................ 14
Tips on Learning ........................................ 14
IR Transmitter Finder Feature .....................16
Learning Commands .......................................16
Clearing Commands ....................................... 18
Clearing Learned commands for a mode ..... 18
Master Clear ............................................. 18
Troubleshooting .............................................. 19
Congratulations on your purchase of this
RM25001 Universal Remote Control. It is one of
the most unique looking, and easy to use remote
controls available today. Its stylish looking blue
backlight, and metallic keypad is like no other
remote. With the RM25001 juggling multiple
remote controls is a thing of the past! Your
RM25001 Universal Remote controls up to 8
devices, including the most popular brands of TV,
VCR, DVD, SAT, CBL, and audio equipment.
Note: Some functions from your original remote
may not be controlled by the RM25001 remote.
Use the original remote, if available, to control
such functions. Sometimes buttons other than
described in these instructions may actually
perform the function. For example, the CHAN
and VOL buttons might be used to navigate
through menu choices. We recommend you
experiment with the remote to identify if such
situations pertain to your equipment.
The RM25001 Universal Remote is easy to use,
easy to program, and it gives you total control—at
the touch of your fingertips!
32
Button Functions
Button Functions, cont.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Note: The REC button must be pressed TWICE to record
from your VCR. For some brands of VCRs, you might need to
press the REC button once, then press it again for three
seconds. Some buttons on the remote might have functions
that are referred to by different names on the device you are
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences depend on
the brand and model of your product. Also, this remote can
only operate features that exist on your product. E.G., your
product must have PREV.CHAN ability for the PREV.CHAN
button to operate this feature.
20.
19.
18.
17.
16.
15.
14.
13.
12.
11.
1. ON-OFFTurns product On or Off.
2. TV, VCR, DVD, etc. Selects product to be operated.
Lights up in green to indicated what mode you’re in.
3. SETUP Used for setting up your remote.
4. CC TV Closed Caption (if your TV has this feature)
or DVD Subtitle toggle. GUIDE (after pressing
SHIFT) brings up the DVD Title Menu screen.
Displays on-screen program guide.
5. SHIFT Press and release to access buttons labeled in
blue (indicator stays on). Press again to exit Shift mode.
6. VOLUME UP/DOWN Changes the volume level of
the product, normally the TV.
7. INFO Displays on-screen channel information, etc.
MENU brings up the DVD disc Menu screen (after
pressing SHIFT) - use with the UP, DOWN, LEFT &
RIGHT navigation buttons (i.e. Vol/Ch buttons).
8. PIP TV Picture-in- Picture control.
9. SWAP Swaps TV PIP screens.
10. SLEEP Turns off the TV after a period of 1 to 99 minutes.
11 . RECORD, PLAY, STOP, REW, FF, PAUSE VCR control
buttons operate your VCR even when the remote is set to
operate the TV. Also operates DVD Scan -/+.
12. ENTER Used after direct channel number entry to
immediately change to the selected channel.
13. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
14. MOVE Moves the position of the PIP screen.
15. PREV CH Returns to the previously selected
channel, or DVD repeat toggle. EXIT (after pressing
SHIFT) Exits On-Screen Menus and/or Returns to
previous On-Screen selection.
16. MUTE Turns off the TV sound while the picture
remains. OK (after pressing SHIFT) Selects menu
items for the device you are controlling.
17. CHANNEL UP/DOWN Changes the channels. Also,
CHAPTER +/- controls DVD/CD track selection i.e.
DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD
when in DVD Mode.
18. INPUT For some TVs, press repeatedly to select from
available viewing sources (antenna, cable, VCR, etc.).
19. LEARN Used to setup learning functions.
20. BACKLIGHT Press to turn the Blue Electrolumines-
cent Backlight feature on. After this, any time you
press any key, the backlighting illuminates the keys
and stays on for 5 seconds after removal of your
last keypress. (You never need to press the backlight key again). But if you do, it turns the Backlight
feature off, which saves battery life. Backlight is
automatically turned off during setup.
54
Button Functions, cont.
Setup, cont.
INPUT
When in TV mode the INPUT button performs the
INPUT source switch function.
When in a mode that has been programmed for VCR the
INPUT button performs the TV/VCR antenna switch
function.
When in a mode that has been programmed for Cable the
INPUT button performs the A.B switch function.
When in a mode that has been programmed for SAT the
INPUT button performs the TV/SAT switch function.
When in a mode that has been programmed for DVD the
INPUT button performs the DVD Setup function.
Setup
Battery Installation
1. On the back of the remote, push down on the tab
and lift the cover off.
2. Match the batteries to the + and - marks inside the
battery case, then insert 2 AAA alkaline batteries.
3. Press the battery cover back into place.
Battery Saver
Your remote automatically turns off if the buttons are
depressed more than 30 seconds. This will save your
batteries should your remote get stuck in a place where
the buttons remain depressed (e.g., between the sofa
cushions).
Code Saver
Codes are stored in permanent memory while you are
changing batteries so you will not lose any codes
stored in the remote while you are changing batteries.
Power-On Default
The remote powers on in TV mode.
Code Setup
The SETUP button is used to setup the remote. You can
either setup the remote using the code for your brand of
product, from the code tables (on separate sheet), or
you can search through the library of codes until you
find a code that works for your product.
Please refer to “Programming with Code Search” on page
8 for more information on using the code search feature
to learn how to search through the library of codes for
your products.
NOTE: You can store any kind of code under any mode
(except TV). I.E. you can store a VCR code under the
CBL button, or a DVD code under the VCR button, etc.
However, you can only store TV codes under the TV
button.
A
A
A
A
A
A
76
Loading...