Thank you for purchasing the GE Universal Remote Control. This
product is designed to provide years of service operating a wide
variety of video and audio equipment.
Your Universal Remote Control requires 2 AAA alkaline
batteries(not included).
To install the batteries:
1. Turn the remote over and push down on the cover and
slide it off.
2. Insert the batteries, matching the batteries to the (+)
mark inside the battery case.
3. Slide the battery cover back into place.
NOTE: Programmed codes will remain in memory for a short
period of time allowing for battery replacement. If batteries
have been dead for a prolonged period of time, reprogramming may be required.
Button Description
INDICATOR LIGHT
The Indicator Light flashes to show that the remote is working.
OFF•ON
The OFF•ON button operates the same as your original remote.
NOTE: Some GE, RCA and ProScan models require you to press the
device button to turn the device on and the OFF•ON button to turn
the device off.
TV, VCR, DVD, DBS
The TV, VCR•DVD, and DBS•CABLE buttons are used to select the
device you want to control.
VOL & CHAN
The VOL (Volume) and CHAN (Channel) buttons increase or
decrease the channel numbers or volume.The CHANNEL buttons
also control the SKIP functions for DVD and CD Player.
MUTE
Mutes volume on the TV.
PREV CHAN
The PREV CHAN button allows you to go to the previous channel
you selected. Operates the same as Last Channel, Go Back or Recall
on your original remote.
CODE SEARCH
Used to program the remote or to search through codes.
MENU
Brings up the Main Menu.
0-9
The number buttons operates the same as on your original remote,
and are used for entering device codes or channel numbers.
ENTER
The ENTER button is used to complete channel selection for some
brands of TV. It is also used to complete the code entry process.
TV/VCR
The TV/VCR button operates the TV/VCR function of your TV.
REW, PLAY, FF, REC, STOP, PAUSE
These buttons operate the same as on your original VCR or remote.
You must press the REC button twice to begin recording. The REW
and FF buttons also control the Reverse and Forward functions for
DVD and CD Player.
SLEEP
The SLEEP button allows you to set a time for you to turn off your
TV automatically.
Programming For TV
2
1. Manually turn on the TV. Find the three digit code for your TV
TV CODE
CHAN +
ON•OFF
1
23
45
6
78
9
0
(OFF)
(BLINK)
INDICATOR
LIGHT
TV
CODE
SEARCH
in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR
LIGHT lights, then release the CODE SEARCH button.
3. Press and release the TV button (The INDICATOR LIGHT will
blink then remain lit.
4. Enter the code using the
Number Buttons. After your code
is entered, the INDICATOR LIGHT
will turn off. If the code is not
valid, the INDICATOR LIGHT
will blink. Check the code list and
repeat process.
5. Aim the remote at your TV and
press the OFF•ON button. Your
TV should turn off.
NOTE: If your TV does not
respond, try all the codes for your
brand. If the codes do not work,
or your brand is not listed, try the
Code Search method, page 10.
6. With your TV on, press
CHAN+ (CHANNEL UP). If the
TV responds, no further programming is required.
1. Manually turn on the VCR. Find the three digit code for
your VCR in the code list.
2. Press and hold the
CODE SEARCH button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH button.
3. Press and release the
VCR•DVD button (The
INDICATOR LIGHT will blink
then remain lit.
4. Enter the code using the
Number Buttons. After your
code is entered, the INDICATOR
LIGHT will turn off. If the code
is not valid, the INDICATOR
LIGHT will blink. Check the code
list and repeat process.
5. Aim the remote at your VCR
and press the OFF•ON button.
Your VCR should turn off.
NOTE: If your VCR does not
respond, try all the codes for your
brand. If the codes do not work,
or your brand is not listed, try the
Code Search method, page 10.
6. With your VCR on, press
CHAN+ (CHANNEL UP). If the
VCR responds, no further programming is required.
The DVD codes are programmed using the VCR•DVD key.
CODE LIST
DVD Codes
Aiwa . . . . . . . . . . . . . . . . . . .350
Hitachi . . . . . . . . . . . . . . . . .351
JVC . . . . . . . . . . . . . . . 161, 352
Konka . . . . . . . . . . . . . 353, 354
Magnavox . . . . 162, 356, 357
Mitubishi. . . . . . . . . . . . . . . .163
Panasonic . . . . . . . . . . . . . .355
Philips . . . . . . . . 162, 356, 357
Pioneer . . . . . . . . . . . . . . . .165
Proscan . . . . . . . . . . . . . . . .160
RCA . . . . . . . . . . . . . . . . . . . .160
Sanyo . . . . . . . . . . . . . . . . . .359
Samsung . . . . . . . . . . . . . . .034
Sony . . . . . . . . . . 166, 360, 361
Toshiba . . . . . . . . 167, 362, 363
Zenith . . . . . . . . . . . . . . . . . .364
Programming For DBS
1. Manually turn on the DBS. Find the three digit code for your
DBS in the code.
2. Press and hold the
CODE SEARCH button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH button.
INDICATOR
3. Press and release the
DBS•CABLE button (The
INDICATOR LIGHT will blink
then remain lit.
4. Enter the code using the
Number Buttons. After your
code is entered, the INDICATOR
BLINK
LIGHT will turn off. If the code
is not valid, the INDICATOR
LIGHT will blink. Check the code
list and repeat process.
5. Aim the remote at your DBS
and press the OFF•ON button.
Your DBS should turn off.
6. With your DBS on, press
CHAN+ (CHANNEL UP). If the
satellite system responds, no further programming is required.
NOTE: If your DBS does not
respond, try all the codes for your
brand. If the codes do not work,
or your brand is not listed, try the
Code Search method, page 10.
7. Enter your code here for easy
reference.
DBS Codes
Alphastar . . . . . . . . . . . . . . .079
Echosphere . . . . . . . . . . . . .078
Echostar . . . . . . . . . . . . . . . .089
GE . . . . . . . . . . . . 071, 080, 081
Hitachi SYS I . . . . . . . . . . . .084
Hitachi SYS II. . . . . . . . . . . .083
Hughes . . . . . . . . 077, 083, 090
JVC . . . . . . . . . . . . . . . . . . . .082
Panasonic . . . . . . . . . . . . . .075
Philips . . . . . . . . . . . . . . . . . .085
Primestar . . . . . . . . . . . . . . .076
Proscan . . . . . . . 071, 080, 081
RCA . . . . . . . . . . . 071, 080, 081
Sony . . . . . . . . . . . . . . . . . . .072
Toshiba . . . . . . . . . . . . . . . . .073
Uniden. . . . . . . . . . . . . . . . . .086
Magnavox . . . . . . . . . . . . .085
LIGHT
OFF
7
Programming For Cable
The cable codes are programmed using the DBS•CABLE key.
Cable Codes
ABC . . . 001, 003, 004, 005, 006,
007
Antronix . . . . . . . . . . . 008, 009
Archer. . . . . 008, 009, 010, 011
Cabletenna. . . . . . . . . . . . . .008
Cableview. . . . . . . . . . . . . . .008
Century . . . . . . . . . . . . . . . . .011
Citizen . . . . . . . . . . . . . . . . . .011
Colour Voice. . . . . . . . 012, 013
Comtronics. . . . . . . . . . . . . .015
Contec/Cony . . . . . . . . . . . .016
Eastern . . . . . . . . . . . . . . . . .017
Garrard . . . . . . . . . . . . . . . . .011
GC Electronics. . . . . . . . . . .009
Gemini. . . . . . . . . . . . . 018, 019
General Instrument. . . . . 001,
. . . . . . . . . . . . . . . . . . . 003, 049
Hamlin. . . . . . . . . . . . . . . . . .035
Hitachi . . . . . . . . . . . . . . . . .003
Jerrold . . . 001, 003, 005, 007,
. . . . . . . 018, 023, 024, 046, 049
Magnavox . . . . . . . . . . . . .025
Movie Time. . . . . . . . . 027, 028
NSC . . . . . . . . . . . . . . . 027, 028
Oak . . . . . . . . . . . . . . . 016, 029
Panasonic . . . . . . . . . 000, 048
Philips . . . . 011, 012, 013, 019,
. . . . . . . . . . . 025, 030, 031, 032
Philips/Magnavox . . . . . . . 011,
. . . . . . . 012, 013, 019, 025, 030,
. . . . . . . . . . . . . . . . . . . 031, 032
Pioneer . . . . . . . . . . . 033, 034
RCA . . . . . . . . . . . 000, 047, 049
Realistic . . . . . . . . . . . . . . . .009
Regal . . . . . . . . . . . . . . 022, 035
Regency . . . . . . . . . . . . . . . .017
Rembrandt . . . . . . . . . . . . . .003
Samsung . . . . . . . . . . . . . . .034
Scientific Atlanta . . . 006, 036,
037, 038
Signal . . . . . . . . . . . . . . . . . .018
Signature . . . . . . . . . . . . . . .003
Sprucer. . . . . . . . . . . . . . . . .000
Standard Componts . . . . . .039
Starcom . . . . . . . 001, 007, 018
Stargate . . . . . . . . . . . . . . . .018
Starquest . . . . . . . . . . . . . . .018
Tocom . . . . . . . . . . . . . 004, 023
Tusa. . . . . . . . . . . . . . . . . . . .018
TV86. . . . . . . . . . . . . . . . . . . .027
Unika . . . . . . . . . . 008, 009, 011
United Cable . . . . . . . . . . . .001
Viewstar . . . 015, 016, 025, 027
Zenith . . . . . . . . . . . . . 050, 051
Sleep Function
The Sleep Function will turn off your TV automatically after
the user programs the time interval from one (1) to ninetynine (99) minutes.
1. Press and hold the SLEEP
button. The INDICATOR LIGHT
will stay lit. Release the SLEEP
button.
2. Enter time in minutes
using the numerical keypad.
INDICATOR LIGHT will go off.
(Min.: 1 minute/keypad entry 0-
1)
(Max.: 99 minutes/keypad entry
9-9)
3. Leave remote aimed at television.
IMPORTANT: Sleep Feature will
not work unless remote is left
aimed at television.
To Turn Off SLEEP Timer:
1. Sleep timer program will
be cancelled and reset to zero by
either of the following:
Press and hold SLEEP button
until INDICATOR LIGHT blinks
or press OFF•ON button, turning
...
BLINK
INDICATOR
LIGHT
BLINK
8
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.