Jasco HO98756 User Manual

MiniCam™ Pro

User’s Manual

HO98756

For technical support contact Jasco Products at 1-800-654-8483

www.jascoproducts.com

Table of Contents

CAUTIONS-------------------------------------------------------3
SYSTEM REQUIREMENTS---------------------------------3
MAINTENANCE CARE AND STORAGE---------------3
CONTENTS------------------------------------------------------5
GETTING TO KNOW YOUR MINICAM™ PRO------5
INSTALLATION-----------------------------------------------6
PHOTOIMPRESSION™-------------------------------------9
VIDEO IMPRESSION™------------------------------------13
MSN® MESSENGER----------------------------------------16
TROUBLE SHOOTING------------------------------------18
TWO YEAR LIMITED WARRANTY-------------------20
FCC STATEMENT-------------------------------------------21

Page 2

Cautions

Read Before Using Your MiniCam™ Pro

1. You must install the camera driver BEFORE connecting the camera

to your computer.

2. Please read this user’s manual before operating your MiniCam™ Pro.

3. Do not leave camera connected to the USB if camera is not going to

be used for a long period of time. This can adversely affect the

picture quality.

System Requirements

1. Operating System

a. Microsoft® Windows® 98 SE

b. Microsoft® Windows® ME

c. Microsoft® Windows® 2000

d. Microsoft® Windows® XP

2. CD drive

3. USB port

Maintenance Care and Storage

Page 3

1. Do not use or store the camera in high humidity and extreme

high/low temperature.

2. Do not touch the lens with your fingers.

3. Do not drop the camera or get the camera wet.

4. Do not try to repair the camera.

5. To clean the camera, use a dry cloth. Do not use organic solvents,

such as alcohol etc. to clean the camera.

6. Store the camera in a dry and clean place

Page 4

Contents

1. MiniCam™ Pro with stand and clip

2. CD with driver and software application

3. Instruction manual

Getting to Know Your MiniCam™ Pro

Note: You must install the camera driver BEFORE connecting the
camera to your computer.

Page 5

Installation

Please note that you must install the camera drivers BEFORE
you connect the camera to the USB port of your computer.

1. You must install all relevant updates, service packs, and patches for

your operating system. These are available on Microsoft’s® website

under “Resources”. Use the “Windows Update” link.

www.microsoft.com).

(

2. Insert the included 98756 MiniCam™ Pro CD into the CD Rom

Drive. (The CD should auto load).

3. If CD does not auto load, follow these steps:

a. Double click on My Computer
b. Double click on the CD icon on the CD drive
c. Double click on setup.exe

4. The installation menu will come up. Select MiniCam™ Pro 98756
Driver.

Page 6

5. Select Next on the Welcome screen.

6. Under Setup Type select Complete, and then Next to continue.

7. Select Install to begin copying the driver files to your computer.

8. On the final screen, select Finish.

9. It may be necessary to have your Windows installation disk available

to install any additional windows drivers onto your computer. You
will receive a prompt if this is necessary.

10. (Optional) On the installation menu, select ArcSoft Software Suite.

Follow the on screen instructions to install ArcSoft

VideoImpression™ and/or ArcSoft PhotoImpression™. DirectX®

may install as well. Please follow the instructions to complete the
installation. You may need to reboot your computer.

11. (Optional) Select User’s Manauls to open a PDF version of the

98756 Instruction Manual in both English and Spanish. You will
need Adobe Reader to open the user’s manuals.

Page 7