Jasco 99003 User Manual

Model 99003

Class 2

Stereo Headphones

with Playback Controls

User Manual

CAUTION

This product does not have a user-serviceable battery. Please do NOT attempt to change the battery yourself. The battery used in this device may present a risk of ﬁ re or chemical burn if misused. Please avoid extreme temperatures.

Do not use this product on an airplane in transit as this could disrupt communication.

Vers. 1 10/06

FCC Information: The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses, generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Off and On, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which he receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

IMPORTANT NOTE

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void the user’s authority to operate the device.

CLASS 2 OPERATION

Class 2 Bluetooth meters or 30 feet. Class 1 devices have a maximum range of 100 meters or 300 feet. Since Bluetooth

devices provide a maximum range of approximately 10

connectivity is bi-directional, the maximum range between two devices depends upon both units’ operational class. As an example, when one Class 1 device is paired with one Class 2 device, the maximum range between them will be limited to 10 meters or 30 feet. Both devices would have to be Class 1 in order to achieve the maximum 100 meter range.

Table of Contents

Charging....................................................................................................4

Button Functions .....................................................................................4

Volume Control ........................................................................................ 5

Power ON / Standby Mode ....................................................................5

Advanced Audio Controls ......................................................................6

Special Note About Bluetooth

and Phone .......................................6

Pairing Mode

Pairing to a Phone .............................................................................. 7

Pairing to an Audio Source ............................................................... 8

Connecting ...............................................................................................9

Switching Between Audio & Phone Calls .........................................10

FAQs .........................................................................................................10

Speciﬁ cations .........................................................................................11

Using the Product

Thank you for selecting the GE 99003 Multifunctional Stereo Headphones. These headphones provide users with the ability to receive stereo audio transmitted via Bluetooth wireless technology along with hands-free operation of Bluetooth-enabled phones. When paired with a phone, this headset allows you to switch back and forth between the audio source and a phone call. The audio source for this headset can be any audio device that is Bluetooth-enabled to comply with A2DP (Advanced Audio Distribution Proﬁ le) speciﬁ cation. The audio source must also support AVRCP in order for the integrated playback controls (pause, play, previous track, next track) to work. If the audio source does not support AVRCP, the pause/play button will only mute the music. Phones must be compliant with Bluetooth speciﬁ cation.

Charging

• Charge the unit for a minimum of 12 hours before ﬁ rst use. Use the enclosed USB charging cable or the AC Adapter to fully charge the headphones.

• The red LED indicator will stay on constantly when charging.

• The headphones’ red LED charging indicator will shut off automatically when the battery is fully charged.

• The red LED indicator will start to ﬂ ash RED when the power is low. Charge the headset when you see the LED low power indicator ﬂ ashing.

Button Functions

Button 2

Blue LED

Button 5

Button 4

Button 3 Button 6

Button 1

Red LED

Left Ear Right Ear

+ 8 hidden pages