Jasco 98536 User Manual

GE Wireless Laser Mouse

Instruction Manual

98536

www.jascoproducts.com

For technical support contact Jasco Products at

1-800-654-8483 or www.jascoproducts.com.

Page 2

Contents Package

• GE Wireless Laser Mouse

• USB Receiver

• Instruction Manual

• 2 AA Batteries

System Requirements

• Windows® 98, 2000, Vista, and 7

• Mac 10.1 and above

• Available USB Port

Special Features

• When your mouse will not be in use for an extended period

of time (i.e.: traveling) you can turn the mouse off to

conserve your batteries via the on\off switch located on the

bottom of the mouse.

• Your GE Wireless Laser Mouse operates at 1600 dpi (dots

per inch). This means that you now have pinpoint accuracy

at your fingertips!

Page 3

Hardware Installation

Please keep these directions in a safe place.

1) Insert the enclosed batteries into the battery compartment

located on the bottom of your mouse. Make sure they are

facing the proper direction.

2) Plug the GE Wireless Laser Mouse receiver into an available

USB port on your computer or GE USB hub. It is not

necessary to reboot your computer.

3) Place your Wireless Optical Mouse within 30 feet

(approximately 9 meters) of the receiver for optimal

communication.

4) Move the mouse to ensure there is a good connection.

5) If the mouse does not work, you may need to move the

receiver closer. See the Troubleshooting section for

instructions.