Jasco 98067, 98046, 98756 User Manual
98067/98756/98046
MiniCam™ Pro
User’s Manual
www.jascoproducts.com
For technical support contact Jasco Products at 1-800-654-8483
Table of Contents
Cautions ........................................................................................................................2
System Requirements ............................................................................................3
Maintenance Care and Storage .......................................................................3
Contents ........................................................................................................................ 3
Getting to Know Your MiniCam™ Pro ..............................................................4
Installation ...................................................................................................................4
Photo Impression™ ...................................................................................................6
Video Impression™ ....................................................................................................8
MSN® Messenger ....................................................................................................10
Troubleshooting ......................................................................................................11
2 Year Limited Warranty .....................................................................................13
FCC Statement .........................................................................................................13
Cautions - Read Before Using Your MiniCam™ Pro
1. You must install the camera driver BEFORE connecting the camera
to your computer.
2. Please read this user’s manual before operating your MiniCam
3. Do not leave camera connected to the USB if camera is not going to
be used for a long period of time. This can adversely affect the
picture quality.
™
Pro.
2
System Requirements
1. Operating System - Microsoft® Windows® 2000, XP and Vista
2. CD drive
3. USB port
Maintenance Care and Storage
1. Do not use or store the camera in high humidity and extreme
high/low temperature.
2. Do not touch the lens with your fingers.
3. Do not drop the camera or get the camera wet.
4. Do not try to repair the camera.
5. To clean the camera, use a dry cloth. Do not use organic solvents,
such as alcohol etc. to clean the camera.
6. Store the camera in a dry and clean place
Contents
1. MiniCam™ Pro with stand and clip
2. CD with driver and software application
3. Instruction manual
3
Getting to Know Your MiniCam™ Pro
Note: You must install
the camera driver
BEFORE connecting
the camera to your
computer.
Snap Shot Button
Microphone
Focus Ring
Lens
Camera Stand
Installation
Please note that you must install the camera drivers BEFORE you connect the
camera to the USB port of your computer.
1. You must install all relevant updates, service packs, and patches for
your operating system. These are available on Microsoft’s® website under
“Resources”. Use the “Windows Update” link. (www.microsoft.com).
2. Insert the included MiniCam
(The CD should auto load).
3. If CD does not auto load, follow these steps:
a. Double click on My Computer
b. Double click on the CD icon on the CD drive
c. Double click on setup.exe
™
Pro CD into the CD Rom Drive.
4
4. The installation menu will come up. Select MiniCam™ Pro Driver.
5. Select Next on the Welcome screen.
6. Under Setup Type select Complete, and then Next to continue.
7. Select Install to begin copying the driver files to your computer.
8. On the final screen, select Finish.
9. It may be necessary to have your Windows installation disk available to
install any additional windows drivers onto your computer. You will
receive a prompt if this is necessary.
10. (Optional) On the installation menu, select ArcSoft Software Suite.
Follow the on screen instructions to install ArcSoft VideoImpression™
and/or ArcSoft PhotoImpression™. DirectX® may install as well. Please
follow the instructions to complete the installation. You may need to
reboot your computer.
11. (Optional) Select User’s Manauls to open a PDF version of the
Instruction Manual in both English and Spanish. You will need Adobe
Reader to open the user’s manuals.
12. (Optional) To download Adobe® Reader® select Adobe Reader 7.0
and follow the instruction instructions. You may need to reboot your
computer.
13. When you have installed the driver, and all of the optional software
you want to install, select Exit.
14. Remove the warning label from the USB plug of your MiniCam
15. After your computer reboots, plug your MiniCam
™
Pro’s USB plug into
™
Pro.
the USB plug of your computer.
16. Open ArcSoft VideoImpression
™
or ArcSoft PhotoImpresssion™ and
follow the instructions to begin using your MiniCam™ Pro camera. Enjoy!
5
Loading...