Jasco 86711 User Manual
GE Bluetooth
Sport Headset
Model 86711
Introduction
Thank you for choosing the GE Bluetooth
Sport Headset, model 86711. This innovative
design allows you the freedom to talk on your
phone, and its unique stylish design makes
the headset barely noticeable. The Sport
Headset also comes with a power bank for
On-the-Go charging for your convenience.
Combining the charge capacity of the headset
with the power bank you can have up to 15
hours of talk time and up to 250 hours of
standby time. The Sport Headset is designed
to fit securely in your ear for worry free use;
when you are not using the headset simply
clip it into the power bank to maintain the
charge and for easy access when receiving
a call.
Package Contents:
• Bluetooth Sport Headset
• Power Bank
• Carrying Pouch
• 3 Different Size Rubber Ear Piece
• AC charging Adapter
• Users Manual
2
Product Reference & Function
Power Bank:
• Charger Port (Port to connect the
charging adapter)
• Charging contacts (Pairs with the
contacts of the headset for charging
headset)
• Indicator light (Allows you to see the
charging status)
• Clips (To hold headset to the
power bank)
Retaining Clips
Charging Contacts
Charging Port
Indicator Light
3
Headset (Front)
• 1 Volume Up (Adjust volume up)
• 2 Volume Down (Adjust
volume down)
• 3 Function Button & Indicator Light
(For pairing and answering calls)
Volume UP
Volume Down
Function Button
4
Headset (Back)
• Earbud
• Charging contacts (Pairs with the
contacts of the power bank)
• Microphone
Earbud
Charging Contacts
Microphone
5
Charging the Headset & Power Bank
Note: There may be some charge on the headset and the power
bank; you will still need to charge the batteries before using the
headset or the power bank. On the initial charge, charge the
Headset and Power Bank for at least 16 hours. The power bank can
be charged by its self.
• Place the headset into the power bank
with the contacts facing each other.
• Plug the AC charging adapter into the DC
power port on the power bank
• The blue LED will illuminate to indicate
the charging has started.
• During charging, the blue LED light will
remain on, when the charging is com-
plete; the blue LED light will be off.
Charging the Power Bank
1. Plug the round barrel connector into the
DC charging port on the power bank.
2. Plug the AC adapter into any standard AC
outlet (120V)
3. Charge until the blue LED indicator light
goes off.
6
Pairing the Headset
1. Before pairing the headset, make sure the
headset is fully charged.
2. Enable the Bluetooth function on your
phone according to the phone’s manufacturer’s instructions.
3. Turn on the headset by pressing and
holding the Function Button, for approximately 10 seconds. You should see the
LED flashing blue and red. The headset is
now in the paring mode.
4. On the mobile phone being paired to
the headset, follow the manufacturer’s
instructions. You will eventually be asked
to enter a pin number.
5. Enter this pin number when prompted.
(1234)
6. When the pairing is successful, your
phone should display the name of the
headset as BTH11
a. The blue LED will slowly flash on and off.
Note: You do not have to pair the headset to the phone again
once it is paired. Some phone models may require reconnecting
the phone to the headset; refer to the phone’s manufacturer’s
instructions. If you wish to pair the headset to another phone, turn
off the phone the headset was originally paired with and follow the
pairing instructions according to the new phone’s manufacturer ’s
instructions. When prompted for the pin number, use the same
number (1234) as in step 5.
7
Loading...