Jasco 51209 User Manual

Personal Security

Motion Sensor
with Keypad
User Manual

Do not use in wet locations

Motion Sensing Alarm

With Remote Control

Alarm/Chime Switch

Indicator Light

Wall

Mount

Motion Sensing Alarm

Low Battery Indicator
The Motion Sensing Alarm has a low
battery indicator light. When the batteries
need to be replaced, the indicator will
flash slowly. Average battery life for
typical usage is up to one year.

INSTALLING BATTERIES
The battery compartment is located on
the back of the unit.

Remove the battery compartment

1.
screw and slide off cover in the
direction of the open arrow.

Insert (3) AA batteries (not included) .

2.
Take care to note the polarity diagram
inside the battery compartment.

Replace the cover and secure screw.

3.

Battery Compartment

Learn

Learn

Button

4

CREATING YOUR PERSONAL ALARM CODE
The 4-digit keypad allows you to set a
personal code for arming and disarming
the alarm.

Remove the battery compartment

1.
screw and slide off cover in the
direction of the open arrow.

Press the LEARN button once; the

2.
red indicator light on the front of the
alarm will blink for 15 seconds. During
this time, input your 4-digit code. A
beep will confirm each input. The
unit will flash a green light 3 times
to confim your new 4-digit code has
been saved.

Replace the cover and secure screw.

3.

INSTALLATION
The alarm is designed to be wall mounted
with the ball and socket mount (included).
The ball and socket mount will provide the

5