Jasco 46562 User Manual

46562 PRODUCT OVERVIEW

Z-Wave In-Wall

In-Wall

Smart Switch

Wirelessly control and schedule lights
and other devices from anywhere

QUICKFIT

SIMPLEWIRE

Wallplate sold seperately

™

™

Smart Switch
With QuickFit™
And
SimpleWire™,
White/Almond

SKU#: 46562

Home automation is even smarter
with the Z-Wave In-Wall Smart
Switch with QuickFit™ and
SimpleWire™. When paired with a
compatible hub, the hardwired
smart switch operates wall, ceiling
and accent lighting through
individual commands and
programmed settings. Wirelessly
control and schedule indoor or
outdoor fixtures for eortless
management of your home.

Features

• QuickFit – Improved components reduced the housing depth by up to 20 percent

compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit
enhancements are the ideal smart solution for older-style switch boxes, multi-gang
configurations or any other application with limited space.

• SimpleWire – Auto-detecting line/load terminals support fast installation by identifying
line and load wires and configuring the switch accordingly. Dual ground ports, which are
oset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.

• Multi-switch compatible – The smart device operates perfectly on its own or seamlessly
integrates into multi-switch setups when paired with Z-Wave Add-on Switches. Up to four
add-on switches can be connected to the same light, fan or appliance.

• Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon
Alexa when connected through a compatible Z-Wave hub.

• Range extender – The in-wall Z-Wave switch repeats the signal from your hub or other
Z-Wave device to extend wireless range by up to 150ft.

46562

PRODUCT OVERVIEW

QUICKFIT

The revolutionary, space-saving QuickFit design features a
rounded housing and 20 percent smaller depth compared to
previous models. The elimination of heat tabs also oers a
more convenient installation and user-experience without
reducing the electrical ratings.

SIMPLEWIRE

With the SimpleWire technology, the new smart controls
feature auto line-load sensing terminals, which eliminate
guesswork or testing line and load wires. The dual oset
ground ports are another defining feature that save time,
simplify installation and reduce wire congestion in
multi-switch setups. Neutral wire required.

VERSATILITY

Automating your home not only makes your life easier, but it
also saves energy, cuts costs, and boosts your home’s securi­ty. Control your lights, fans and appliances, schedule a timed
event, or create a custom scene from anywhere in the world
at anytime of the day. Compatible with LED, CFL, incandes­cent and halogen bulbs, and other hardwired devices.

PERSONALIZE

Changeable paddles in a variety of colors like black, brown,
and ivory, are available to match your home’s décor. Replace
existing switches with easy installation.

1

PRODUCT SPECIFICATIONS46562

Jasco Z-Wave In-wall
Smart Switch

QUICKFIT

SIMPLEWIRE

™

™

Power: 120VAC, 60Hz Signal Frequency: 908.4/916MHz
Maximum Load: 960W Incandescent,

1/2 HP Motor 1800W (15A Resistive)

Range: Up to 150 feet from controller or closest Z-Wave device
Operating Temperature: 32-104° F (0-40° C)
Warranty: 2-year limited product warranty

Requires neutral wire. Switch must be mounted indoors

Design Features

· QuickFit™ – Improved components
reduce the housing depth by up to
20 percent compared to previous
Z-Wave models and eliminated the
need for heat tabs

· SimpleWire™ – Auto line-load
sensing terminals support fast
installation by detecting line and

switch accordingly
Dual ground ports, which are offset
to avoid switch box mounting
screws, support daisy-chaining in
multi-switch setups

· Turn the connected device
On/Off manually or via Z-Wave
hub or controller

· Remotely monitor with any
mobile device

· Works with Google and Alexa
(requires compatible hub

· May be used in single pole
installation or with up to four
Jasco model 45710 or 46560
Add-on switches in 3, 4, 5 or

· Works with all LED, CFL, halogen
and incandescent bulbs

· Blue LED indicates switch
location in a dark room
(with 4 adjustable settings)

· Can be Included in multiple
Groups and Scenes

· Utilizes the Z-Wave Firmware
Update Meta Data command

updates Over the Air

*

*)

· Uses a standard decora wall plate
(wall plate not included)

· Interchangeable Paddle switch:
White & light almond paddle
included in package

· LED status can be inverted manually
changed to invert, always OFF and
always ON

· Inline traveler circuit protection

Z-Wave Plus with S2 Security
and SmartStart Features

· Improved battery life and up to 50

percent greater wireless range

· QR codes with unique,
industry-standard secure key
exchange to add a layer of
128-bit encryption

· Effortless device pairing to Z-Wave

· Backward compatible with all
generations of Z-Wave devices

· 250% faster processor

· 400% more memory

· Supports wireless upgrades
to future-proof your home

White/light almond
paddles included

LED status, Alternate exclusion

· Screw Terminal installation; requires
wiring connections for Line (Hot),
Load, Neutral, and Ground.
Traveler wire required for multi
pole installation

* Requires Z-Wave hub or controller, functions may vary depending on brand.

2

PRODUCT SPECIFICATIONS46562

Single Location Wiring

Multi-Location Wiring

Space-Saving Screw Terminals

Installation Recommendations:

· Insert wire into port and tighten screw. Do not wrap wire around screw

· Indoor use only

· Visit http://www.ezzwave.com/hubs for hub compatibility

· Wallplates sold separately

· Trilingual Instruction manual – (English, French, Spanish)

3

46562 QUICKSTART GUIDE

Smart Control Add-on Switches

OR

B

C

A

F

G

E

4

46562

QUICKSTART GUIDE

OU

B

C

A

F

G

E

O

B

C

A

F

G

E

5