Jasco 45234 User Manual

Home Monitoring

Wireless Color
Camera with
Receiver

User Manual

45234

www.jascoproducts.com

1-800 -654-8483

2

Thank you for purchasing the GE 45234 Wireless
Color Camera System with Receiver. Please review
these instructions carefully before attempting to
operate the unit.

PRODUCT FEATURES

“Wi-Fi” internet friendly wireless system—won’t

•
interfere with home wireless networks

View up to two cameras automatically

•

Audio Detection & Notifi cation feature—alerts

•
when sound is detected in a monitored area

Night Vision feature for low or no light viewing

•
up to 10 ft.

Unique “axis-swivel” camera mount allows for

•
desktop or wall installation

Adjustable antenna for camera and receiver

•

Wirelessly transmits audio and video up to

•
200 ft. (unobstructed line of sight).

Receiver connects to any TV or monitor with

•
AV inputs

Camera for Indoor/Outdoor use

•

PACKAGE CONTENTS

Please check and identify all the parts before
proceeding with the installation.

1. 45233 Wireless Color Camera

2. 45234 Wireless Receiver

3. Wall plate and mounting hardware for camera

4. 2 AC adapters

5. AV cable

BEFORE YOU INSTALL

When choosing the best location for the placement
of the camera and receiver, it is best to avoid any
sources of possible RF interference such as
microwave ovens and cordless phones. Proximity
to these and other sources of RF interference can
inhibit the proper functioning of the receiver.

The 900MHz video signals pass easily through
your home’s interior walls, but the signal may be
refl ected by power wires or plumbing inside those
walls. Usually a slight adjustment to the position of
the Receiver and/or Camera antenna will improve
reception. Position the antenna upwards to improve
sensitivity, and downwards to reduce sensitivity.
Take care not to force the antenna past its lock
positions.

3

CHOOSING A CAMERA MOUNTING LOCATION

The 45233 Wireless Color Camera can be positioned
on a desktop, or mounted to a wall. It is suitable for

4

indoor or outdoor use. When choosing a mounting
location, please be advised:

Do not use in wet locations. If using outside,

•
position camera in a sheltered location.

Do not position the camera so that it points

•
directly into the sun or any bright light, as this
may cause damage to the camera.

Avoid viewing areas where half the area is in

•
bright sunlight and the other half is dark, such
as in the shadow of a building. All types of
cameras have diffi culty “seeing” into areas of
such divergent light levels.

In low light conditions, the camera will

•
automatically activate the Infrared (IR) LED’s and
switch the camera to Night Vision mode. Night
Vision viewing distance is up to 10 feet.

The AC adapter used to power the camera

•
cannot be positioned farther than 8 ft. from
an AC socket. Do not use the supplied adapter
outside or run the cable through walls. If you
need to extend the adapter cable, 15 ft.
extensions are available by contacting
Customer Service at 800-654-8483.

The Camera has an unobstructed wireless

•
transmission range up to 200 ft. from the
receiver. Transmission distance indoors is

reduced due to interior walls, wiring, household
fi xtures and metal plumbing.

CONNECTING TO A TV OR MONITOR

To prepare for installation of the system, we
recommend that you temporarily connect the
45234 Receiver to a TV or Monitor to help you
choose the best location for installing the camera.
The camera connects wirelessly and automatically
to the receiver when both are powered on and
within 200 ft (unobstructed view) of each other.
This system will accommodate up to 2 cameras.

1. Connect one end of the cable (3.5mm male) to the
rear of the receiver, and the other end (white/yellow)
to your television’s A/V inputs. Match the yellow

Power

TV

5

Shown with optional
rechargeable battery
(Sold separately)

Power

Video In

Audio In

Yellow White

6

plug to the yellow VIDEO IN jack and the white plug
to the white AUDIO IN jack.

2. Plug the AC adapter into the power jack (marked
on the back of the receiver, then into an AC outlet.

3. Loosen the antenna nut and rotate the antenna
to a vertical position. Tighten antenna nut so it is
snug. Do not over-tighten. Place the receiver either
on top or near to your TV.

4. Set your TV to monitor the VIDEO INPUT
designated for the Receiver.

CHANNEL SELECTION
Manual Mode

To select one of the two
channels manually,
press the MANUAL button
on the top panel of the
Monitor. The green LED
will light for the
corresponding channel.
The receiver will switch to a
different channel (1 or 2)
each time the MANUAL button
is pressed. When you have
selected the channel with the
active camera, that video will
appear on the monitor/TV screen.
Each camera must be assigned to
a specifi c channel; both cameras

Auto

Channel
Selection
switch

Manual

1 2

7

1 2

CAMERA 1

Channel Setting

1 2

CAMERA 2

Channel Setting

1 2 1/2

RECEIVER

Channel Setting

cannot be on the same channel or the signals will
cancel out.

Multi-Camera Operation

This wireless surveillance system is designed to
work with up to 2 cameras. Additional cameras are
sold separately. IMPORTANT: When using more

than one camera, each camera must be assigned
to a specifi c channel using the channel selection
switch located on the underside of the camera
housing. Select either 1 or 2 for each camera. Each

camera must be assigned to a specifi c channel;
both cameras cannot be on the same channel or
the signals will cancel out. If using only one camera
you can select either Ch 1 or Ch 2, whichever
provides the best picture. The slide switch located
on the rear of the Receiver must be set to refl ect the
channels in use.

8

Auto Mode (2 Camera Operation)

To have the receiver automatically switch between
two active channels, fi rst check the receiver is set
to 1/2 position. Next, press the AUTO button on the
top panel of the receiver. The green LED will light
and the receiver will automatically select between
the two active cameras. The monitor will display
images from both cameras alternately.

Cycle Time Setting (Time interval between
camera selections)

The default cycle time for the receiver is preset to
4 seconds. To change the cycle time, press both of
the buttons (Auto and Manual) on top of the receiver
simultaneously. The LED will fl ash; each fl ash adds
one extra second of cycle time. The cycle time can
be verifi ed by the number of fl ashes the LED makes
when you release the buttons—one fl ash equals
one second. Cycle time can be set between 2-30
seconds.

NIGHT VISION

The 45233 Wireless Color Camera features Night
Vision technology. Objects and images can be seen
in little or no light up to 10 ft. The camera uses a
special image sensor that automatically detects
available light levels. It turns on/off the Infra-Red
(IR) LEDS on the front of the camera. These LEDs
provide artifi cial light that allows the camera to

9

‘see’ in the dark.

Night Vision will

Infra-Red
(IR) LEDs

appear as a Black and
White image. When

the image sensor detects
enough light, color will

Sensor

return to the images.

AUDIO DETECTION AND
NOTIFICATION FEATURE

This feature allows the system
to emit an audio alert
whenever sound is
detected within a
monitored area.
When the camera

Sensitivity
Control Wheel

detects a sound, the receiver will sound an alert
and a notifi cation light will fl ash. The feature can be
turned ON/OFF by pressing the button on the front
panel of the receiver. The sensitivity for the level of
audio detection (when the receiver will sound an
alert) can be adjusted with the sensitivity control
located at the back of the receiver.

CAMERA INSTALLATION

Once your preferred camera mounting location
has been chosen, disconnect the AC adapter from
the camera and power off the TV/monitor before
proceeding.

10

Desktop Mount:

1. Place camera in desired location on a fl at surface.

2. Set Channel switch on camera to 1 or 2.

3. Power ON the TV/monitor; reconnect AC adapter
to the camera.

4. Select the channel (1 or 2) on the receiver that
corresponds to the camera channel setting. (See
Channel Selection)

5. Adjust antenna and camera angle as needed for
the clearest picture. Positioning
the antenna upwards to
improve sensitivity, and
downwards to reduce

SENSITIVITY

MAX

sensitivity. Take care not
to force the antennas
past their lock positions.

MIN

Wall Mount:

1. To simplify the wall mount
process, you will fi nd a custom
wall mounting plate included with
the mounting hardware.

Antenna pivots to
increase/decrease
signal strength

2. Select the ideal location. Using
the supplied mount as a template, drill two 3/16”
holes in the desired mounting location, and install
the two wall anchors (included) into the holes, or
screw directly into a wall stud. Secure the mounting

plate to the wall. Do not run the adapter cable
in walls; when securing the cable, do not cut or
puncture.

3. Set Channel switch on camera to 1 or 2. Slide the
camera onto the alignment and locking pins of the
mounting plate. Plug in AC adapter into camera.

4. Adjust antenna and camera angle as needed for
the clearest picture.

USING THE 45234 WIRELESS COLOR CAMERA
SYSTEM WITH A VCR or DVR

You can connect the 45234 camera system to a
VCR or DVR in order to record the images received
from up to 2 cameras. The VCR or DVR must also
be connected a TV/Monitor in order to see live or
recorded images. See diagram on next page.

11

12

Audio

In

TV

VCR

Video

In

Audio

Out

Power

Shown with optional
rechargeable battery
(Sold separately)

Power

Video

In

OPTIONAL WIRELESS
BATTERY PACK
AVAILABLE
(SOLD SEPARATELY)

Rechargeable NiMH
Battery is available for
use with the 45233
Wireless Color Camera.
This 850mAh battery will
power the 45233 camera
for approximately 5
hours on a single charge.
To order this battery,

AC adapter
charges the
battery

Wall or
desktop
mount

please visit www.jascoproducts.com/
batteryoffer or call our Customer Support

department at 1-800-654-8483, Monday–Friday
8 a.m.–5 p.m. CST.

Audio

In

Video

Out

13

TROUBLE SHOOTING
If you are having trouble operating this product,
please consult the guide below. If you have any
questions or feel the camera system is not
operating correctly, or you simply need additional
information, please visit our web site
www.jascoproducts.com, or contact our Customer
Service Group 1-800-654-8483.

No camera picture

1. Check all connectors. Make sure camera(s) and
receiver are powered ON.

2. Ensure camera(s) and receiver are set to correct
channel(s).

3. Make sure camera is within range of receiver.

4. Adjust the antenna for the camera, receiver or
both to obtain best image.

Blank monitor

1. Make sure receiver or monitor is switched ON,
and the correct video input has been selected

2. If using AC adapter, make sure it is plugged in.

3. If using a battery, make sure it is installed
correctly, and is fully charged.

Interference on camera picture

1. Make sure each camera (transmitter) is within

14

range, and that no large obstructions are blocking
the signal.

2. Try repositioning the camera, receiver or both to
improve the reception quality.

3. If a camera is positioned close to the receiver
point antenna away from the receiver.

4. Reposition other nearby equipment transmitting
on the 900MHz frequency.

5. Adjust the antenna for the camera, receiver or
both to obtain best image.

Audio problems

1. Ensure the volume is turned up suffi ciently on the
Monitor (or TV).

2. Make sure the sound is within the microphone
range.

3. If the unit emits a loud wailing sound (feeds back),
try moving the camera away from the receiver or
angle the receiver differently.

SPECIFICATIONS

CAMERA

TV System .....................................................................................................NTSC

Integrated Lens...................................................5.6mm, F1.8 fi xed focus

Resolution ..............................................................360 horizontal TV Lines

High-Speed Electronic Shutter ............................1/60 - 1/15,000 sec

Image Sensor ..................................................................................1/3” CMOS

(Subject to change without notice.)

15

Min. Illumination ......................... 0 lux up to 3 feet, 0.5lux up to 10 ft

Voltage ...........................................................................................................9VDC

Current Consumption ..................................................150mA maximum

Overall Size .................................................................2.35”W x2.74Hx3.16D

Frequency Range ...................................................................902 - 928 MHz

Modula tio n ........................................................................................................ FM

Channel Selection ...............................................................................Manual

Case Finish ........................................................... UV resistant ABS plastic

RECEIVER

Voltage ...........................................................................................................9VDC

Current Consumption .................................................100 mA maximum

Frequency Range ...................................................................902 - 928 MHz

Outpu t .............................................................................................Audio/Vi deo

Overall Size ...................... 3.8” L x 2.8” W x 0.6” H (Without antenna)

GENERAL

Operating Temperature .......................14°F to 104°F (-10°C to 40°C)

Humidity ....................................................................................Less than 85%

WARRANTY

ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this
produc t to be free from manufacturing defects for a period of one year
from the original date of consumer purchase. This warranty is limited
to the repair or replacement of this product only and does not extend
to consequential or incidental damage to other products that may be
used with this unit. This warranty is in lieu of all other warranties express
or implied. Some states do not allow limitations on how long an implied
warranty lasts or permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you.
This warranty gives you specifi c rights, and you may also have other
rights which vary from state to state. If unit should prove defective within
the warranty period, return prepaid with dated proof of purchase to:
Jasco Product s Company
10 E. Memorial Road, Oklahoma City, OK 73114

16

WARNING

Risk of fire and shock

• Only use the supplied cUL listed AC to DC adapter.

• The supplied adapter is for indoor use only.

• Do not run the camera cable inside walls; when securing the
cable, do not cut or puncture

• Do not use in wet locations

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connec t the equipment into an outlet on a circuit dif ferent from that to
which the receiver is connected.

- Consult the dealer or an experienced radio/T V technician
for help.

is a trademark of General Electric Company
and is used under license to Jasco Products Company LLC,
10 E. Memorial Road, Oklahoma City, OK 73114
www.jascoproducts.com