Digital Indoor Antenna
MODEL: 24702
Thank you for purchasing this digital indoor antenna.
Before your installation, please read this manual carefully and keep it for further information.
INTRODUCTION
The antennas used for digital terrestrial broadcasting can be easier and smaller. This indoor antenna
(24702) is special designed for digital terrestrial broadcasting reception. The benefits of use this antenna
are easy to install, light weight, compact size…etc. With state of the art low noise amplifier technology
and circuitry, it will provide the best reception. And the compact and stylish housing design can be
accompanied with your digital STB and TV.
This digital indoor antenna (24702) is designed with 3 section foldable antenna panel. You can use
the adjustable design to get the best signal reception. The digital antenna can be installed on a wall or be
installed at the back of TV; just simply use the mounting kit.
Feature:
! 3 section foldable slim profile design indoor antenna
! Adjustable antenna mechanism for better reception adjustment
! 34” telescopic antenna for VHF reception enhance
! Flexible installation methods with mounting kit: wall-mounted, TV back mounting
! VHF 47~230MHz
! UHF 470~870MHz
! Amp. Gain VHF: 21dB ± 3dB; UHF: 19 dB ± 3dB
! Low noise amplifier technology
PACKAGE CONTENT
Please check the contents before your installation.
Wall mounting kit
(Screw X 2,
Plastic pole X 2)
INSTALLATION
Step 1: Take out the antenna main unit.
Step 2: Connect the power inserter to your Set Top
Box (or TV) with the F-Male connector.
Step 3: Take the coaxial cable that attached on the antenna, and connect it to the power inserter.
Step 4: Take out the power adaptor; connect the barrel
end to the DC input of power inserter, AC end to
the AC Outlet. (Please note use only supplied
power adaptor.)
Step 5: Turn on the STB and TV.
Step 6: Adjust the orientation of antenna to get the best signal reception.
※ If you are going to use the antenna with mounting base, please follow the steps below.