Jasco 19232 User Manual

electrical codes.

Wall

From

terminals
screw

applicable local
Install according to
screws provided.
location with two
button in desired
button. Mount
the back of the
screw terminals on
wire to each of the
power. Attach one
chime. Turn off
transformer or
sound, check
chime does not
circuit. If door
completing the
wires together,
touching the two
the door chime by
chime circuit. Test
door chime wires emanating from the existing door
between 36” and 44” above the sill. Locate the two
height above the door sill as the door knob or handle
Push buttons are typically mounted at the same

Installation

systems which exceed 16 volts.
Note: This button is not recommended for use on

Replaces existing doorbell button

Direct Wire Push Button