Jas-Audio ORSUS User Manual

JAS AUDIO SPEAKERS

ORSUS

OWNER’S MANUAL and Package Contents

For additional requests
If you have any additional questions regarding the installation or
operation of our products, you are welcome to contact us directly via
email: “ [e-mail] “, and please check frequently our JAS
Audio official website: “ http://www.jas-audio.com “.

Page 1 of 7

http://www.jas-audio.com

JAS AUDIO

ORSUS HIGH FIDELITY LOUNDSPEAKERS SYSTEM

Orsus, a high-end level arrival into the JAS family, represents a new standard in its more
affordable price of full range speaker category. This was achieved by blending in one
compact floor standing units with its fundamental design from simplicity. This 3-way 4 units
speaker is smooth and musical! With open, warm and timbre sound that is seductively easy
on the ears. And offers cl ear and exciting music reproduction even after hours of listening.
Moreover, the Dual Morel woofers-modules increase the dynamic range which enables to
deliver the possibility of playing large orchestral recordings at realistic Sound-Pressure-Level.

OWNER’S MANUAL

Introduction

Thank you for purchasing the JAS Audio Orsus line of speakers.
JAS Audio speakers are designed and manufactured to the highest quality
standards. The Orsus line of speakers combines ribbon and dynamic driver
technologies to produce a line of world-class speaker in performance and
appearance.

The Orsus line of speakers features a unique aluminum twin-ribbon tweeter
that produces extremely clean and quick transients as well as enormous
soundstage both in width and depth. The choice of dynamic bass/midrange
drive units for each model is diligently done in effort to allow seamless
integration with the twin-ribbon tweeter. The result is yielding the lowest
coloration and maximum tonal definition.

Page 2 of 7

http://www.jas-audio.com

Unpacking Inspection

The tweeter of JAS Orsus speaker is protected with a
Transparent-Protective-Sheet to prevent damaging on
the Tweeter Unit (Dispersion Board + Driver Net)*.

Customers are recommended to remove the
Transparent-Protective-Sheet immediately before
using or installing on your listening system!

Orsus Assemble Kit Setup

Each Orsus Packing Box contains a set of Orsus Assemble Kit, which carry
the feeding parts and accessories. Setup-Procedure as follow:

1. Two oversized Aluminum-Bar-

feeders need to be installed side by
side (Screws and Tools attached in
kit). Well, Orsus is ready to lunch
after turning up!

2. By turning the level screw (top of the copper-spike), the speaker can

be leveled where it stands. Spike discs use as an option, serve to
protect your flooring from the needle sharp spikes..

Caution: Do not over tighten the level-

screws when installing the feet. Doing so

might risk breaking the bar feeder holes,
and level-screws become functionless. A
removable warning label has been
attached at the base of each speaker
already.

Page 3 of 7

http://www.jas-audio.com