Jas-Audio ORSA User Manual

JAS AUDIO SPEAKERS

ORSA

OWNER’S MANUAL and Package Contents

For additional requests
If you have any additional questions regarding the installation or
operation of our products, you are welcome to contact us directly via
email: “ [e-mail] “, and please check frequently our JAS
Audio official website: “ http://www.jas-audio.com “.

Page 1 of 7

http://www.jas-audio.com

JAS AUDIO

ORSA HIGH FIDELITY LOUNDSPEAKERS SYSTEM

Welcome to JAS Audio Family, this 2-way
speaker has a distinct stacking twin cabinet
design. The vertically vented speaker with
venting ports facing each other between the
upper and lower cabinets is capable of
producing a 360-degree sound field that gives
rise to excellent 3-D soundstage. Align with
the patented “Focusing-Point and Phasing-
Correction-Technology” to further enhance
its pinpoint image and transparency as well.

OWNER’S MANUAL

Introduction

Thank you for purchasing the JAS Audio Orsa line of speakers.
JAS Audio speakers are designed and manufactured to the highest quality
standards. The Orsa line of speakers combines ribbon and dynamic driver
technologies to produce a line of world-class speaker in performance and
appearance.

The Orsa line of speakers features a unique aluminum twin-ribbon tweeter
that produces extremely clean and quick transients as well as enormous
soundstage both in width and depth. The choice of dynamic bass/midrange
drive units for each model is diligently done in effort to allow seamless
integration with the twin-ribbon tweeter. The result is yielding the lowest
coloration and maximum tonal definition.

Page 2 of 7

http://www.jas-audio.com

Unpacking Inspection

The tweeter of JAS Orsa speaker is protected with a Transparent-Protective­Sheet to prevent damaging on the Tweeter Unit
(Dispersion Board+Driver Net)*.

Customers are recommended to remove the
Transparent-Protective-Sheet immediately before
using or installing on your listening system!

Well prepared before Settling

Two caution on your speakers’near placing:
I. Do not place any kinds of metal pieces, such as: keys, needles,

staples... etc. near or closed to the Orsa＇s tweeter units, because the
magnetic field can cause a strong attractive force to damage the

speaker.

II. Do not use vacuum cleaner on the speaker drivers; on the other hand,

do not direct coupling the speaker drivers by strong air via
compression gun. Any extreme blowing may damage the speakers.

* If you feel the speakers sounded very
muffled and distant (abnormal); as if, please
open the speaker grille (net-cover) carefully
and double check if the tweeter unit was
covered by the Transparent-Protective-Sheet.

Product Features

Cabinet

• Low diffraction front baffle design

• High quality MDF (Medium Density Fiber-board)

• Inner horizontal plane bracing adds extreme rigidity

• Pure natural wool for the best vibration and resonance damping

• Top grade authentic wood veneer with polyester piano finish

• Custom machined, high current binding posts

Page 3 of 7

http://www.jas-audio.com