Jas-Audio ORIOR GRAND User Manual

JAS AUDIO SPEAKERS

ORIOR GRAND

OWNER’S MANUAL and Package Contents

For additional requests
If you have any additional questions regarding the installation or
operation of our products, you are welcome to contact us directly via
email: “ [e-mail] “, and please check frequently our JAS
Audio official website: “ http://www.jas-audio.com “.

Page 1 of 8

http://www.jas-audio.com

JAS AUDIO

ORIOR GRAND

HIGH FIDELITY LOUNDSPEAKERS SYSTEM

Introduction

ORIOR GRAND,

floorstander combines the silky and smooth high
range of a ribbon tweeter, and the extremely
detail and punchy bass of ceramic driver.
Incorporated with a patent design 360-degree
downward air dispersion port, it lends a sense of
spaciousness to the soundstage. This mini tower
impresses you not only with its sturdy cabinet, but
the amazingly huge soundstage that can be
created. It is a breakthrough, heavily build 2­way speaker on its beauty and advanced design.

OWNER’S MANUAL

This 2-way 2-unit

Thank you for purchasing the JAS Audio ORIOR GRAND line of speakers.
JAS Audio speakers are designed and manufactured to the highest quality
standards. The ORIOR GRAND line of speakers combines ribbon and
dynamic driver technologies to produce a line of world-class speaker in
performance and appearance.

The ORIOR GRAND line of speakers features a unique aluminum twin­ribbon tweeter that produces extremely clean and quick transients as well as
enormous soundstage both in width and depth. The choice of dynamic
bass/midrange drive units for each model is diligently done in effort to allow
seamless integration with the twin-ribbon tweeter. The result is yielding the
lowest coloration and maximum tonal definition.

Unpacking Inspection

Page 2 of 8

http://www.jas-audio.com

The tweeter of JAS ORIOR GRAND speaker is
protected with a Transparent-Protective-Sheet to
prevent damaging on the Tweeter Unit (Dispersion
Board + Driver Net)*.

Customers are recommended to remove the
Transparent-Protective-Sheet immediately before
using or installing on your listening system!

ORIOR GRAND Assemble Kit Setup

Each ORIOR GRAND Packing Box contains a set of ORIOR GRAND
Assemble Kit, which carries the feeding parts and accessories. Setup­Procedure steps in following

1. Four oversized Aluminum-Bar-feeders need to be installed at corners

(Screws and Tools attached in kit). Well, ORIOR GRAND is ready
to lunch after turning up!

2. By turning the level screw (top of the copper-spike), the speaker can

be leveled where it stands. Spike discs use as an option, serve to
protect your flooring from the needle sharp spikes.

Caution: Do not over tighten the level-screws when installing the feet.
Doing so might risk breaking the bar feeder holes, and level-screws become
functionless. A removable warning label has been attached at the base of
each speaker already.

Well prepared before Settling

Page 3 of 8

http://www.jas-audio.com