Jas-Audio ODIN User Manual

JAS AUDIO SPEAKERS

ODIN

OWNER’S MANUAL and Package Contents

For additional requests
If you have any additional questions regarding the installation or
operation of our products, you are welcome to contact us directly via
email: “ [e-mail] “, and please check frequently our JAS
Audio official website: “ http://www.jas-audio.com “.

Page 1 of 7

http://www.jas-audio.com

JAS AUDIO

ODIN HIGH FIDELITY LOUNDSPEAKERS SYSTEM

Odin,

into the JAS family, represents a milestone in full
range speaker design category. This 2.5 way, 3
unit floor-stander combines the silky smooth high
range of a selected ribbon tweeter, and the
extremely detail and punchy base of Ceramic
driver. This unique combination to employ the
natural and coherence sound; providing
transparent performance in full audio spectrum
and dynamic range to let you enjoy hours of
musical passion without any exhaustion. With
the downward port radiated in 360° patent design
that lends a sense of spaciousness to the
soundstage, and the heavily constructed cabinet,
this floorstand speaker is truly the ultimate goal
for any audiophiles.

a pair of mainstream monitors arrival

OWNER’S MANUAL

Introduction

hank you for purchasing the JAS Audio Odin line of speakers.

T
JAS Audio speakers are designed and manufactured to the high
standards. The Odin line of speakers combines ribbon and dynamic driver
technologies to produce a line of world-class speaker in performance and
appearance.

he Odin line of speakers features a unique aluminum twin-ribbon tweeter

T
that produces extremely clean and quick transients as well as enormous
soundstage both in width and depth. The choice of dynamic bass/midrange
drive units for each model is diligently done in effort to allow seamless
integration with the twin-ribbon tweeter. The result is yielding the lowest
coloration and maximum tonal definition.

Page 2 of 7

http://www.jas-audio.com

est quality

Unpacking Inspection

The tweeter of JAS Odin speaker is protected with a
Transparent-Protective-Sheet to prevent damaging on
the Tweeter Unit (Dispersion Board + Driver Net)*.

ustomers are recommended to remove the

C
Transparent-Protective-Sheet immediately before
using or installing on your listening system!

din Assemble Kit Setup

O

ach Odin Packing Box contains a set of Odin Assemble Kit, which carry

E
the feeding parts and accessories. Setup-Procedure as follow:

1. Four oversized Aluminum-

Bar-feeders need to be
installed at corners (Screws
and Tools attached in kit).
Well, Odin is ready to lunch
after turning up!

2. By turning the level screw (top of the copper-spike), the speaker can

be leveled where it stands. Spike discs use as an option, serve to
protect your flooring from the needle sharp spikes.

Caution: Do not over tighten the level-screws when

installing the feet. Doing so might risk breaking the bar

feeder holes, and level-screws become functionless. A

removable warning label has been attached at the base

of each speaker already.

Page 3 of 7

http://www.jas-audio.com