Jas-Audio BRAVO 2.4SE User Manual
OWNER’S MANUAL
JAS Bravo 2.4
Vacuum Tube
Integrated Amplifier
NOTE: Before installing your new Bravo 2.4 audio amplifier, please read this
manual carefully. I t will inform you of the product specifications and also proper
installation and operation procedures.
For additional requests
If you have any additional questions regarding the installation
or operation of our products, you are welcome to contact us directly via
email: “ enquiry@jas-audio.com “, and please check frequently our JAS Audio
official website: “ http://www.jas-audio.com “.
Page 1 of 6
http://www.jas-audio.com
JAS AUDIO HIGH FIDELITY
Welcome to JAS Audio Family! This JAS Bravo 2.4 integrated amplifier is designed and
manufactured to the highest quality standards. The design denotes performance,
elegance, and simplicity. You will find this tube amplifier visually pleasing and easy to use
without going through pages of instructions. IMPORTANT: before operating the unit, make
sure you are familiar with the safety measures documented below.
Bravo 2.4 OWNER’S MANUAL
Introduction
Integrated Amplifier
Thank
you
for purchasing the JAS Audio Bravo 2.4 Integrated Amplifier. Standing on the
chassis immediate in front of the transformer casing are two 5Z3P rectifier tubes. On either side of
the chassis are two KT88 drive stage tubes for each channel output, whereas the two 12AT7 driver
tubes and the only 12AU7 tube for signal amplification are in the middle.
Overlaid with hand
finished solid wooden board engraved with the Bravo logo and other indications, a
stylish and elegant appearance is put in front of the audience. Made of aluminum alloy,
the front panel of 8mm in thickness is a representation of coherence in design of making
the chassis robust and the gear working with durability.
Page 2 of 6
http://www.jas-audio.com
Loading...