USERS GUIDE
BLUETOOTH STEREO SPORT HEADSET
EXCEED
FEATURES
• Wireless technology using Bluetooth 4.1 A2DP
• Comfortable lightweight in-ear design with ear hooks
for added support
• High Definition Stereo Sound with Noise Reduction and
AptX Technology support
• Rechargeable battery with Up to 6 Hours of Talk/Music time
• Streams Audio from any Bluetooth Device
• On Board Controls for music and call functionalities
• Magnetic earbuds for unique and convenient carry solution
• Tangle Free cable
1
PACKAGE CONTENTS
• Jarv NMotion Exceed BTHL-450 Bluetooth Stereo Earbuds
• Micro USB Charging Cable
• 3 sets of ear bud tips (S,M,L)
• 3 sets silicone ear hooks (S,M,L)
• Collar clip and sizing clip
• Users Guide
S M L
2
+
-
Volume Up / Next
Volume Down / Previous
MFB
(Multi-function button)
Power / Play / Pause / Pair
Micro USB
Charging
Port
LED
Indicator
Microphone
CONTROL UNIT
Magnetic Earbuds
3
LED INDICATOR GUIDE
STATUS
Power On
Power Off
Charging
Charging complete
Pairing Mode
Low Power
Connected
INDICATOR
Blue Light
Turns Red to power off
Red Light
Blue Light
Red And Blue Light flash
alternately in pairing mode
Flashing Red Light
Blue LED flashes twice every 7
seconds
4
GETTING STARTED
To use your Jarv NMotion Exceed Bluetooth Stereo headset,
please follow the steps below:
1. Ensure your Bluetooth headset is fully charged.
2. Pair your Bluetooth headset to a Bluetooth-enabled device
prior to use. (See Pairing your Headset instructions)
Powering On the Headset
Press and hold down the
Multi-Function button for 3
seconds until a blue light
appears.
Powering Off the Headset
Once powered on, press and
hold down the Multi-Function
button for 3 seconds until a
red light appears.
PRESS & HOLD
3 seconds
+
-
PRESS & HOLD
3 seconds
+
-
5
CHARGING YOUR HEADSET
Your Jarv NMotion Exceed headset comes with a built-in
rechargeable battery and a Micro USB charging cable.
Charge fully before use. The battery indicator will turn red
when charging and turn Blue once charging is complete.
Initial charging time is approximately 2 hours.
Appx. 2 hours
+
-
6
100%
PRESS & HOLD
9-10 seconds
+
-
PAIRING YOUR HEADSET
In order to use your Jarv NMotion Exceed Bluetooth Stereo
Earbuds with a Bluetooth-enabled device, you will first need
to pair the two.
1. Begin with the headset being powered off and fully charged
2. Place the headset and the mobile phone where they are
easily viewable and no more than 3ft. apart.
3. Press and hold the Pairing button (multi-function button)
for approximately 9-10 seconds until the red and blue light
flash alternately which indicates that you are in Pairing Mode.
4. Activate your mobile phone's Bluetooth pairing function.
5. Set the mobile phone to search for Bluetooth devices
within range and select “Jarv NMotion Exceed” from the list
of devices shown.
7
Settings
Bluetooth
Bluetooth
JARV
NMotion
Exceed
Passcode
0000
6. When successfully paired the LED indicator will flash Blue
twice every 7 seconds.
(If you are prompted for a Passcode enter “0000” and press
“ok” to pair the headset with your mobile phone)
CONNECTION WITH THE LAST
PAIRED DEVICE
When powered on, the headset will automatically connect
with the last successfully paired device. If the connection is
successful, it enters standby mode. If the devices fail to
connect within 5 minutes after the pairing has been initiated,
the headset will turn off automatically.
8
WEARING YOUR HEADSET
The Left / Right indicator is located on the inside of the
silicone earhooks.
Because everyone’s ears are different, be sure to try all sizes
of earbud tips. Only with the right size earbud tips will you
enjoy a snug fit & premium sound quality
.
0/
CALL MODE
Answering a Call
Short Press the Multi-Function button once to accept the
call, or answer the call normally via your mobile phone.
Rejecting a Call
Press and hold the Multi-Function button for 2 seconds to
reject the incoming call.
Ending a Call
Short Press the Multi-Function button to end the call or end
the call directly from your mobile phone.
Redialing a Call
Press the Multi-Function button twice to redial the last
dialed phone number on your mobile phone.
Voice Dialing
Once connected, press and hold the multi-function for 1
second to access voice dialing (Bluetooth device must
support this feature)
00
MUSIC MODE
Adjusting the Volume
Short Press the Volume + to increase volume or Volume – to
decrease volume. You can also adjust the volume on your
handset or device
Play/Pause Music
Once connected, Press the Multi-Function button once to
play music. Short Press the Multi-Function button to pause
music.
Previous Track
In music mode, Press and hold the "Volume -" key to select
the next track.
Next Track
In music mode, Press and hold the "Volume +" key to select
the previous track.
01
Multi-Connect Mode (Simultaneously connects to 2 devices)
For the Multi-Connect mode, the two Bluetooth devices have
to be paired separately with the headset.
1-Follow the “Pairing your headset” instructions to pair your first
device to your Jarv “NMotion Exceed”. Once successfully paired,
disable the Bluetooth function on your first device and Power Off
your headset by pressing down the multi-function for 3 seconds
until the red light appears.
2- Follow the “Pairing your headset” instructions to pair and connect
your second device to your Jarv “NMotion Exceed”. Once the second
headset is connected and paired, go back to the first device, turn on
the Bluetooth function and select "Jarv NMotion Exceed" to connect.
Both Bluetooth devices are now connected to “Jarv NMotion Exceed”
and you will be able to manage the connection from either devices.
Note:
1-You can only connect to a maximum of two devices in
Multi-Connect mode.
2. Although you can pair two devices, only one of them can play
music from the headset at a time.
3. To switch between the two devices, simply pause the music on
the first device and play music on the second device or vice versa.
02
TROUBLESHOOTING
If you are unable to connect your headset and mobile phone,
please try the following:
Ensure that your headset is fully charged and powered on.
Ensure that the headset is paired with your mobile phone.
Ensure that your mobile phone's Bluetooth feature is
activated. Please refer to your mobile phone user’s guide for
specific instructions.
Ensure that the headset is within a 30 ft. range of your
mobile phone and that there are no obstructions, such as
walls or other electronic devices, between the two.
If the above steps do not solve your problem, please remove
your mobile phone battery for a short time and recharge the
headset. Repeat the troubleshooting sequence.
If you are experiencing Bluetooth connection issues - KEEP
THE MUSIC DEVICE AT OR ABOVE WAIST LEVEL ON YOUR
RIGHT SIDE, THE SAME SIDE AS THE HEADPHONE ANTENNA.
Your body is 80% water. Water blocks low power radio signal
like Bluetooth. In the absence of nearby ceilings for signal
bounce, your body can block the signal between the music
device and the headphones. When outdoors or at the gym the
03
use of armbands or wrist-worn music players are
recommended. Having your music player in your pants pocket
below waist level may produce varied results as your body
can get between the music device & headphones.
WARRANTY
At Jarv, we are dedicated to making the best quality product.
To back this up, your Jarv Bluetooth earphones are
warrantied for One (1) full year from the date of purchase.
Please visit our website www.jarvmobile.com for more
details.
Or Email us at: customerservice
@
jarvmobile.com
04
SAFETY INFORMATION
Check local laws regarding the use of mobile phones and
headsets while driving.
If you use the headset while driving, ensure that your
attention and focus remains on the road and you drive in a
responsible and safe manner.
Never allow children to play with the headset, as the small
parts may be a choking hazard.
Observe all signs that require an electrical device or RF
radio product to be switched off in designated areas. These
could include hospitals, airplanes, blasting areas, and
potentially explosive environments.
Never mount or store your headset over an air bag
deployment area, a serious injury may result when the air
bag deploys.
Do not open or mutilate the built-in battery.
Dispose of batteries according to local regulations. Do not
dispose as household waste.
05
CARE AND MAINTENANCE OF
YOUR HEADSET
i. Consider turning your headset off before placing it in your
pocket or bag. If the Power button is accidentally activated,
your mobile phone may place an unintended call.
ii. Do not expose the headset to excessive moisture or
humidity, as it is not waterproof, it is rated IPX4
water-resistant and can withstand moderate sweating and
moisture.
iii. Do not use abrasive cleaning solvents to clean the headset.
iv. Do not expose the headset to extreme temperatures. The
best storage temperature range is from 40-80 F, otherwise,
the life of the headset will be affected.
v. Do not dispose of the headset in fire as it this may result in
an explosion.
vi. Do not bring your headset into contact with sharp objects
as this will cause scratches and can damage the headset.
vii. Do not attempt to disassemble the headset, as it does not
contain serviceable components.
viii. If you do not use the headset for long periods, be sure to
store it in a dry place, free from extreme temperature
conditions and dust.
06
PRODUCT SPECIFICATIONS
Basic Specs:
Model No. BTHL-450
Product size: 24X0.5X1.33 inches
Weight: 0.63oz(bare unit)
Playing time:Up to 6 hours | Stand by Time: 96 hours
Charging voltage: DC 5 V
Charging interface: MICRO USB
Charging time: 1-2 hours
Charging current: 80mA
Auto-shut-off: 5 minutes
Battery status indicator: Supported on IOS system
Audio transmission: Support APTX
Battery:
Battery Specs: 3.7V, 60mAh lithium-ion battery * 2
Battery life: 300 times (discharge capacity≥80%）
Actual performance may vary due to the user's habits, different modes of
operation, and mobile phone settings. This manual is for reference
purposes only. The specifications and design of the headset may change
without prior notice. Actual product may differ slightly from the image
on the packaging
07
WARNING AND PRECAUTIONS
WARNING: To prevent fire or shock hazard, do not expose this
unit to rain or moisture.
WARNING: Do not place this unit directly onto furniture
surfaces with any type of soft, porous, or sensitive finish. As
with any rubber compound made with oils, the feet could
cause marks or staining where the feet reside. We
recommend using a protective barrier such as cloth or a
piece of a glass between the unit and the surface to reduce
the risk of damage and/or staining.
WARNING: Lithium batteries, like all rechargeable batteries
are recyclable and should be recycled or disposed of in
normal household waste. Contact your local government for
disposal or recycling practices in your area. They should be
incinerated since they might explode.
NOTE: If you suspect your battery may be dead after several
attempts to charge, please visit www.jarvmobile.com for
support.
Never disassemble the unit or attempt to remove the battery
as that could cause leakage of an electrolyte substance.
08
FCC WARNINGS
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide
reasonable protections against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Loading...