Page 1
Page 2
Contents
1. Features and Function
2. Warnings and cautions
3. Product contents
4. Product specification
5. Installation guide
6. Exclusive viewer
7. Firmware upgrade
8. Setup
9. User directions
2page
Page 3
1. Features and function
Thanks for using JANUS V2 1.0.0 It integrates the vehicle DVR system with leading-edge
technology, GPS to create the new generation vehicle surveillance system.
This state of art system not only records H.264 video and CD quality audio, but also manage
events happening on vehicle.
z Non stop recording
Recording inside and front view while its driving.
Available to manage the recording speed and resolution
Recording speed – Max.50 fps (channel/25fps).
Recording resolution – VGA (640 x 480), CIF (320 x 240)
z Event archiving
Automatically recording when event occurs.
(Manage the setup: Initially setup: 20 seconds)
Events – Emergency (Emergency button)
Impact/shocking (Physically impact)
Sudden acceleration or brake
Start to recording 2 ~ 5 seconds before and 10 ~ 30 seconds after the event.
z Analyze live image, audio, speed and location
Easy to find an accident / incident location (e-map) since GPS system is installed.
z Night viewing
IR LED is perfect for the night recording.
(No necessary to turn on the light when it’s recording)
3 page
Page 4
2. Warnings and Cautions
Do not clean the unit
with water or volatile
solvent.(can be damaged
the product or might
cause of fire or electric
shock
Don’t try to insert or
put unknown
substance into unit.
(Might cause a fire
Or electric shock.)
Do not segregate or open
the unit and remodel it.
(It’s not our responsible
For when unit has
Occurs error since
remodeled by user)
Please adjust the unit
before you drive
the vehicle.
(might be cause
of accident .)
STOP
Take out the
SD memory card
when after turn off
the unit completely
(might cause of
loss of saving)
！
Avoid heavy
sun shade
(Image will be faint
or distorted.)
！
Avoid dust on the
cameras and keep
the unit away from
the direct ray
of light
！
Do not use anymore
！
when overheating
or see the smoke
from the unit
4page
Page 5
3. Product contents
JANUS V2 Power cable/Cigar jack
Emergency
Extension Button
Bracket
GPS
User Manual and
Install CD
If any of these items is missing or damaged, notify your dealer or installer immediately.
Keep the packing utilities for moving or storage purposes afterwards.
5 page
Page 6
10
9
11
8
1
2
7
6
3
4
5
1 IR LED 7 SDHC memory card insert
2 CDS sensor 8 Monitor connection
3 Recording LED 9 GPS connection
4 GPS LED 10 Channel switch button
5 POWER LED 11 Power cable connection
6 Emergency Button
6page
Page 7
4. Product Specification
Contents Specification
Camera 0.3 Mega Pixel CMOS
Lens 175° Wide Lens
Audio Inner MIC
Emergency
Button
Internal / External button
Sensor
G-Sensor (Outer GPS)
Vibration Sensor installed (Impact detection)
Memory SDHC
Power DC 7 ~ 26V
7 page
Page 8
Specifications
Camera
2EA CMOS Built-in
Video Input
Digital 2ch built-in
Audio Input /Output
C- MIC built-in
Video Compression
H.264
Audio Compression
ADPCM
Recording Resolution
VGA 640X480, CIF 320 x 240
Recording Speed
Max.50fps (CH/25fps)
Emergency Event Switch
Urgent, event detect and recording
Vibration Sensor
Impact, event detect and recording
GPS Sensor
Over speed, sudden accelerate, detect and recording
Recording Media
SDHC memory (Max :32GB, Default 4GB)
Lens
Wide angle 175°
IR LED
850n 3PCS with CDS Sensor
Viewer
Windows Exclusive viewer
Power Supply
DC 7V~26V (enable Car Battery)
Operating Temperature
0°~55°C(maintain temperature: -45° ~ 85°C)
Relative Humidity
10~95% @40°
Weight
150g
Dimension (W x D x H)
65 (W) x 140 (D) x 30(H)mm
8page
Page 9
5. Installation Guide
1. Please insert SD memory card into
JANUS V2 SD card slut and connect with
bracket.
2. Connect with JANUS V2 ‘Video OUT’ component to display monitor’s
(or Navigation LCD) ‘Video INPUT’ component. (Yellow is video, red is audio)
3. Connect with cigar power cable to JANUS V2 power Component (DC 7~26V) for
operation the unit.
9 page
Page 10
4. It takes about 15 seconds to booting and after
that beep sounds will be continued.
The images are showing on monitor and it
Starts to recording
(*JANUS V2 initially setup)
5. Please check the images from the monitor and try to find the right place to stick
JANUS V2 on. (Sticker on the back of the bracket is very adhesively.)
6. Connect GPS module to the JANUS V2 and locate the right place in.
(*GPS can be placed in bracket)
GPS Module
10page
Page 11
7. Connect external emergency button to JANUS V2 and locate external emergency button
to near the driver’s seat
11 page
Page 12
z JANUS V2 Viewer inst allation guide (Korean and English are provided)
1. Run JANUS V2 EXE file from the Installation CD.
2. Click next for next step..
12page
Page 13
3. After finish the installation click JANUS V2 Icon on desktop.
4. Put ID and PASSWORD before using.
13 page
Page 14
6. Exclusive Viewer (JANUS V2 Player)
6
11
7 8 9 10
5
4
3
1
2
1
Configuration 7 Open file
2 Close 8 Save Steal shot
3 File list 9 See E-map
4 Play button 10 Volume control
5 Auto-meter 11 Channel play mode button
6 Speed control bar
14page
Page 15
6-1. Button Operation
3 4 5
6
2
1
6-1-1. Main buttons (1~5)
1. Open configuration 2. Close
3. Open recorded file
4. Saving steal cut image
5. Open map
(Location coordinates will be shown when you play the file)
6-1-2. Play buttons (6)
Move to first data Play Backward
Pause Play
Move to last data PIP function
Play 640 x 480 modes each channel
Play 320 x 240 modes With 2 channel
15 page
Page 16
6-1-3. Play Channel
Play 640 x 480 modes each channel Play 320 x 240 modes with 2 channe ls
Screen Double Click!!
Channel No. 1 and No. 2 can be showing at the same time
16page
Page 17
Screen Double Click!!
Screen Double Click!!
When you double click on the image you can see full screen.
17 page
Page 18
6-2. Play list
List will be shown event by each categories such as ‘Normal’ ‘ Emergency’ ‘Impact’ ‘Over
speed’
Recorded files are marked as year/month/day/hour/minute/second.
18page
Page 19
6-3. Map Link
See E-map : E-map and location will be provided when click
map button.
Whenever network is connected you can see an e-map
(google map is provided)
19 page
Page 20
6-4. Configuration
Open Configuration
System.cfg
JANUS V2 Version 1.0.0 must to choose the ‘system cfg’. file in order to open and
change configuration
20page
Page 21
6-4-1. Setup
3
4
5
6
7
2
1
1. Frame : Setup recording frames (Available setup for each channel)
2. Event frame : Setup frames of event occurs. (Pre-Alarm and Post Alarm)
Pre-Alarm – 2 ~ 5 seconds to adjustable before event.
Post-Alarm – 10 ~ 30 seconds to adjustable after event.
3. Quality : Recording Quality control
4. Disk Usage : Setup the disk usage
Once – If the SD memory card is full, stop recording forward.
Recycle – If the SD memory card is full, start to over write from the beginning.
5.Time Zone : Set up time zone by each country.
6. Over speed setup : setup over speed limits.
7. Event on/off : Activate event setting by types such as emergency, impact,
Over speed, sudden brakes and sudden accelerate.
21 page
Page 22
6-4-2. User configuration
1. Car Info :
Vehicle’s information
2. Driver Info:
Driver’s information
3. User ID :
JANUS V2 user ID
4. Password:
JANUS V2 user password.
5. Version :
JANUS V2 Version information
7. Firmware upgrade
22page
Page 23
All the JANUS V2 upgrades and configuration are automatically upgrade by SD memory card.
Firmware upgrade
Please visit (www.JANUS V2page.com) and download the firmware.
(www.JANUS V2page.com -> Support -> JANUS V2 support -> Download)
1. Take out SD memory card 2. Insert SD memory card to PC
From, the JANUS V2.
3. Download the files from the website. 4. Insert SD memory card to JANUS V2.
Copy firmware file to the SD memory card
. It will automatically upgrade
23 page
Page 24
8. Setup
Changed setup will be applied when the JANUS V2 is boot up.
1. Take out SD memory card 2. Insert SD memory card into PC
from the JANUS V2
3. Run JANUS V2 Viewer 4. Changing the setting on configuration
t
5. Close JANUS V2 viewer and take
out the SD memory card from the PC.
6. Insert SD memory card
into JANUS V2 and boot up
24page
Page 25
9. User Directions
z Insert SD Memory card first before
Starting JANUS V2.
z Be sure disconnecting power cable
before takes out the SD card from
the JANUS V2.
(It might be a cause of damage if SD memory card
get out in sudden when power on)
z Be sure backup the data before over written
data. JANUS V2 will be overwritten when the
memory is full.
25 page
Page 26
26page
Caution and Warning
Caution:
Any changes or modification in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class a
digital device, purchase to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his
own expense.
Warning:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Loading...