Janus LTE910PS POTSwap Product information
P
R
O
D
U
C
T
B
R
I
E
F
LTE910PS POTSwap™
Description
The Janus POTSwap allows users to replace analog (copper)
phone lines, also called POTS (plain old telephone service)
or PSTN (public switched telephone network), with a costcompetitive POTSwap unit and cellular voice plans. The
POTSwap converts your fixed location landline devices to
cellular enabled fixed or mobile implementations.
Installing a POTSwap is the easiest way to switch legacy
equipment from traditional phone landlines to a 4G LTE
network. The existing phone line is connected directly to
POTSwap. Simply unplug the telephone jack from its wall
outlet and plug it into the POTSwap’s RJ11 socket. Insert the
appropriate SIM card into the back panel of the unit.
Integrating Telit’s LE910C1-NF LTE module as their cellular
engine, the LTE910PS POTSwap units operate in LTE bands
2, 4, 5, 12, 13, 14 (FirstNet only), 66, 71 with fallback to
HSPA+ bands 2, 4, and 5. North American carriers include:
AT&T, T-Mobile, and Verizon. Rogers, Bell and Telus versions
will be available soon for Canadian customers.
Janus offers carrier voice plans in support of the LTE
POTSwap. Equipment lease options are available to qualified
customers. Contact Janus for more information.
Applications
Emergency phone kiosks
Broadcast trucks
Marine telephones
Mobile office trailers
Elevator telephones
Approvals:
Regulatory Approvals:
PTCRB
FCC ID: R17LE910CxNF
ISED Canada: 5131A-LE910CxNF
UL: 62368-1 Coming Q1 2021
Carrier approvals:
AT&T
Verizon
Check with Janus if you require any
specific carriers not identified.
RoHS Compliant
Features
Supports 3G and 4G network
standards
Wide operating temperature range
ARM Cortex-M3TM processor
Firmware upgrade support
Flexible power supply options
Rugged aluminum enclosure
2359 Diehl Road
Aurora, IL 60502
630.499.2121
info@janus-rc.com
www.janus-rc.com
Bulletin
Revision
Date
JA16-LTE-PB
24 Nov 2020
07
Public school districts
POTSwap Connectivity
Mobile
Network
PSTN
POTSwap™
Specifications
Interfaces
Modem/Telephone RJ11 FXS
Serial USB Mini -- user terminal interface for configuration and firmware upload.
Cellular Antenna SMA
GPS Antenna SMA; 3.3 V LNA bias voltage output.
Power Input 7-15 Vdc; 22W with two input alternatives:
6mm DC power jack with 2mm center pin positive
5.08mm (0.200”) terminal header (accepts screw clamp and crimp connector type terminal blocks)
Features
SLIC Performs all BORSCHT functions
DTMF decoding
REN=1 at 100 ft. (30m)
Voice VoLTE (4G) and Voice over cellular (3G fallback)
Cellular Connection 4G (LTE) bands 2, 4, 5, 12, 13, 14 (FirstNet only), 66 and 71. Plus 3G (fallback) bands 2, 4 and 5.
SIM Card Micro (3FF size) SIM Card
Mounting Integrated mounting brackets
Pushbuttons MODE and RESET
LEDs Power, Status, Cellular Link, GPS and Signal Strength
Dimensions (L x W x D) 6.0 in (152mm) x 5.2 in (132mm) x 1.2 in (30mm)
Weight 13 oz (365 g)
Environmental
Operating Temperature -40° C to +60° C (-40° F to 140° F)
(Note: 6mm DC power jack is not specified for operation below -25°C)
Relative Humidity 5% to 95% (non-condensing)
LTE POTSwap™ Ordering Information
POTSwap MODEL DESCRIPTION
LTE910PS v1.00 - TBUVN AT&T, Rogers, Bell and Telus (no Band 14)
LTE910PS v3.00 - TAUVN Verizon (no Band 14) (Emergency calls to 911 are not supported)
LTE POTSwap™ Carrier Certifications and Regulatory Approvals
The POTSwap includes several cellular carrier and regulatory approvals and certifications, as stated in our Product Briefs, User
Manuals, and other documentation. Ultimately, the customer is responsible for ascertaining and abiding by the Federal, State and
local laws, regulations and other requirements regarding the application in which they will deploy the POTSwap.
Revision History
Revision Date Note
00 06/18/19 Initial Release
01 01/30/20 Revisions to Firmware
02 02/18/20 Updated Band Information
03 04/28/20 Updated Firmware info
04 07/27/20 Added Certification Information
05 09/17/20 Updated Ordering Information
06 09/27/20 Added UL 62368-1 Safety Standards & Removed info on Data Plans
07 11/24/20 Notice to customers: Carrier, Certifications and Regulatory Approvals
Division of The Connor-Winfield Corporation
2359 Diehl Road • Aurora, IL 60502
630.499.2121 • info@janus-rc.com
www.janus-rc.com
Contact Sales for Additional Special Order Options:
Dave Jahr: djahr@janus-rc.com | 630-499-2121
© Copyright 2020 Janus Remote Communications.
All Rights Reserved Specifications subject to change without notice
See website for latest revision. Not intended for life support applications.
POTSwap is a registered trademark of Janus.
Loading...