Janus 230V 750VA, 230V 1000VA, 230V 1500VA, 230V 2200VA, 230V 3000VA User Manual

□

Tower and Rack-Mount

Convertible UPS

User’s Manual

750/1000/1500/2200/3000

1

Table of Contents

1 Introduction ------------------------------------------------------------------------------------2
2 IMPORTANT SAFETY INSTRUCTION-------------------------------------------------3

2.1 An Important Notice------------------------------------------------------------3

2.2 Storage Instruction--------------------------------------------------------------4

3 SET UP -----------------------------------------------------------------------------------------5

3.1 Inspection ------------------------------------------------------------------------ 5

3.2 Place the UPS Properly---------------------------------------------------------5

3.3 Unpacking------------------------------------------------------------------------6

3.4 Selecting Installation Position-------------------------------------------------7

3.5 UPS Setup------------------------------------------------------------------------7

3.6 Tower Setup ---------------------------------------------------------------------8

3.7 Rack-Mount Setup--------------------------------------------------------------9

3.8 UPS Front Panel--------------------------------------------------------------- 11

3.9 LCD Display Panel ----------------------------------------------------------- 12

3.10 UPS Rear Panel --------------------------------------------------------------- 13

4 INSTALLATION --------------------------------------------------------------------------- 18

4.1 Connect Utility and Load ---------------------------------------------------- 18

4.2 Connect Network Surge protection----------------------------------------- 19

4.3 Connect Computer Interface Port------------------------------------------- 19

4.4 REPO Switch------------------------------------------------------------------ 20

5 OPERATION-------------------------------------------------------------------------------- 21

5.1 Turn on the UPS -------------------------------------------------------------- 21

5.2 Turn Off the UPS ------------------------------------------------------------- 21

5.3 Plug-in Charge ---------------------------------------------------------------- 21

5.4 Auto-Restart ------------------------------------------------------------------- 22

5.5 Alarm Silence------------------------------------------------------------------ 22

5.6 Self Test------------------------------------------------------------------------ 22

6 UPS MAINTENANCE--------------------------------------------------------------------- 23

6.1 Battery Replacement---------------------------------------------------------- 23

6.2 How to Replace Battery------------------------------------------------------ 24

6.3 Recycling the Used battery -------------------------------------------------- 26

7 Communication------------------------------------------------------------------------------ 27

7.1 DB-9 Connector--------------------------------------------------------------- 27

8 Optional Communication Cards----------------------------------------------------------- 28

8.1 DCE (Dry Contact) card ----------------------------------------------------- 28

8.2 SNMP card of Megatec ------------------------------------------------------ 29

9 SPECIFICATIONS ------------------------------------------------------------------------- 30

9.1 120V---------------------------------------------------------------------------- 30

9.2 230V---------------------------------------------------------------------------- 32

2

1 Introduction

The UPS featured with Tower/Rack Convertible design, Single AVR Boost
and Single Buck, Pure Sine Wave Output, User’s Friendly LCD Display, Built-in
customer Option Slot, Hot Swappable Battery, and USB/RS232 Communication
interface, provides a flexible from factor for most of business critical file server,
minicomputers, network switches and hubs, etc. in tower or rack mount formats.

z Sine Wave Output provides assurance of compatibility with all kinds of loads.
z User’s Friendly LCD panel may display system status including load level,

battery level, AVR-Boost/Buck and fault status for easy service.

z 90% High Efficiency in Normal Mode meets high energy saving standard

and reduces noise and heat generated by other topology UPS.

z Easy Swappable Battery Function may save the time and money by

swapping the batteries by end-user without sending it back for a factory
service.

z Cold Start Function enables to turn on the UPS without connecting to the

Utility.

z Optional Communication Software allows not only the control of the UPS

and graceful shutdown when the Utility Fails, but also allows the user to
remotely test the major operating functions of the UPS, communicate via
SNMP/web/network optional card, access UPS functions via the web and
alert users via SMS messages against specific events.

z User-friendly Plug and Play design can easily be installed by end user. All

units up to 3KVA are supplied with input cables and output sockets as
standard.

z Plug-and-play USB/RS232 interface conveniently offers a plug-and-play

USB or RS232 port for connecting with nowadays IT products.

3

2 IMPORTANT SAFETY INSTRUCTION

2.1 An Important Notice

1. The UPS has its own internal energy source (battery). Should the battery
be switched on when no AC power is available, there could be voltage at
the output sockets.

2. Make sure that the AC Utility outlet is correctly grounded.

3. Do not open the case, as there are no serviceable parts inside. Your
warranty will be void.

4. Do not try to repair the unit yourself; contact your local supplier or your
warranty will be void.

5. Please make sure that the input voltage of the UPS matches the supply
voltage.

6. To eliminate any overheating of the UPS, keep all ventilation openings free
from obstruction, and do not store "things" on top of the UPS. Keep the
UPS 30 cm away from the wall.

7. Make sure the UPS is installed within the proper environment as specified.
(0-40℃ and 30-90% non-condensing humidity)

8. Do not install the UPS in direct sunlight. Your warranty may be void if the
batteries fail.

9. Install the UPS indoors as it is not designed for installation outdoors.

10. Dusty, corrosive and salty environments can do damage to any UPS.

11. Install the UPS away from objects that give off excessive heat and areas
that are excessively wet.

12. If liquids are split onto the UPS or foreign objects dropped into the unit,
the warranty will be null and void.

13. The battery will discharge naturally if the system is unused for any length
of time.

4

14. It should be recharged every 2-3 months if unused. If this is not done,
then the warranty will be null and void. When installed and being used, the
batteries will be automatically recharged and kept in top condition.

15. This UPS supports electronic equipment in offices, telecommunications,
process control, medical and security applications. Non-authorized
technician is not allowed to install the UPS in the following areas:
a. Medical equipment directly related to human life
b. Elevator, Metro (Subway) system or any other equipment related to

human safety.

c. Public system or critical computer systems.

16. Do not install the UPS in an environment with sparks, smoke or gas.

17. Make sure the UPS is completely turned off when moving the UPS from
one place to another. It might cause electrical shock if the output is not cut
completely.

18. SAVE THESE INSTRUCTIONS – This Manual Contains Important
Instructions that should be followed during Installation and Maintenance of
the UPS.

19. Symbol for ON/Off is displayed and defined.

20. Intended for installation in a temperature-controlled, indoor area free of
conductive contaminants.

21. Maximum ambient temperature 40℃ (or 0~40℃ for ambient Operating).

2.2 Storage Instruction

For extended storage through moderate climate, the batteries should be
charged for 12 hours every 3 months by plugging the UPS power cord into the
wall receptacle and turn on input breaker on front panel. Repeat this procedure
every 2 months under high temperature environment.

5

3 SET UP

3.1 Inspection

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.

The package is recyclable; save it for reuse or dispose of it properly.

3.2 Place the UPS Properly

The UPS is with microprocessor control, which shall be placed in a well-

ventilated & low humid environment.

6

3.3 Unpacking

1. Take the UPS out of the PE foam.

2. Remove the packing materials.

3. Standard Package includes:
a. User's Manual
b. 1pc x AC Input Power Cord ( Not available for hard wiring connection

models)

c. (1pc for 750/1k/1.5kVA, 2pcs for 2.2k/3kVA)x IEC output cables ( for the

UPS with IEC sockets only)

d. 1set x UPS communication kit (optional)
Accessories for Tower and Rack Mount

7

3.4 Selecting Installation Position

It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the UPS and extend the life of the UPS.
Please follow the instructions below:

1. Keep at least 20cm(8 inches) clearance
from the rear panel of the UPS from the
wall or other obstructions.

2. Do not block the air-flow to the
ventilation openings of the unit.

3. Please ensure the installation site
environmental conditions are in
accordance with the UPS working
specifications to avoid overheat and
excessive moisture.

4. Do not place the UPS in a dusty or
corrosive environment or near any
flammable objects.

5. This UPS is not designed for outdoor
use.

3.5 UPS Setup

The UPS offers a flexible form factor
enabling integration into a wide variety of
environments.

The UPS with space-saving design only
occupy 2U for 1000 to 3000VA.

If you are installing the UPS in a tower,
continue to the following section, “Tower
setup” otherwise; continue to “Rack-Mount
setup”.

8

3.6 Tower Setup

Stand alone unit

9

3.7 Rack-Mount Setup

Step1

Step2

10

Step3

Step4

Step5

11

3.8 UPS Front Panel