Janome JP-3004, JP-1504, JPH-204, JP-5004, JPH-104 User Manual
...
JANOME ELECTRO PRESS
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
JP-104 JP-204 JP-504 JP-1004
For Your Safety
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It will
protect you from possible danger during operation.
*After having read this manual, keep it in a handy place so that you or the
operator can refer to it whenever necessary.
(
(
FOR YOUR SAFETY
This volume contains particularly important instructions and notices for safe and proper use of this
machine. Please read it thoroughly and be sure to follow the instructions and notices.
Instructions for your safety are also included in each operation manual. Please refer to these during
Warning
Caution
The “Warning” symbols indicate the possibility of death or
serious injury.
The “Caution” symbols indicate the possibility of accidental injury
or damage to property.
actual operation.
V ariou s symb ols are used in th is manual. Plea se re a d th e follow ing ex plana tion of wha t ea ch sy mbo l
stands for .
z Symbols indicating the possible extent of damage or injury
These symbols indicate the extent of damage or injury that can occur when the machine is
handled incorrectly or instr uctions a re n ot followed .
z Symbols indicating hazard-type and hazard evasion method
The following symbols illustrate instructions you must follow.
Indicates what kind of safety measure should be taken.
Take care.
Indicates prohibition.
Never do this. (general prohibition)
Do not disassemble, modify or repair.
Do not touch.
Indicates that the action must be taken.
Be sure to follow instructions.
Be sure to unplug the power supply from wall outle t.
Be sure to check grounding.
General caution)
contact prohibition)
For Your Safety Electro Press JP Series 41
Caution
When the electro press is being operated or adjusted, keep the operation manuals in a
handy place so that you or the operator can refer to them whenever necessary.
Safety precautions should not necessarily be limited only to those prescribed in the
operation manuals. Please consider any possible dangers that may exist in your
specific operating environment and take the appropriate precautionary measures against
these.
1. INSTALLATION
1.1 Securing the press environment
Always use a safeguard.
A person putting his hand inside the machine’s working area may be injured.
Install an interlock as a safeguard that triggers an emergency stop when activated.
Use the I/O-S connector included in the package.
For details, please see the operation manual <Setup>.
<Example of the Area Sensor>
Area Sensor
Area Sensor Controller
I/O-S
Connection
For Your Safety Electro Press JP Series 4 2
Loading...